Switched from the old IDE interface (disabled it) to SATA only in the kernel:
[ 1.788921] irq 11: nobody cared (try booting with the "irqpoll" option)
[ 1.788978] Pid: 0, comm: swapper Not tainted 2.6.28 #4
[ 1.789031] Call Trace:
[ 1.789085] [<c0134153>] __report_bad_irq+0x24/0x81
[ 1.789138] [<c01342df>] note_interrupt+0x12f/0x170
[ 1.789191] [<c01338dc>] handle_IRQ_event+0x25/0x4a
[ 1.789244] [<c01348c4>] handle_level_irq+0x7a/0x90
[ 1.789299] [<c0104e07>] do_IRQ+0x6f/0x88
[ 1.789352] [<c012c1c4>] getnstimeofday+0x3b/0xd1
[ 1.789407] [<c010f150>] smp_apic_timer_interrupt+0x41/0x71
[ 1.789461] [<c0103973>] common_interrupt+0x23/0x28
[ 1.789515] [<c011c9bf>] __do_softirq+0x2d/0xea
[ 1.789535] [<c011caa2>] do_softirq+0x26/0x2e
[ 1.789535] [<c010f150>] smp_apic_timer_interrupt+0x41/0x71
[ 1.789535] [<c01039a0>] apic_timer_interrupt+0x28/0x30
[ 1.789535] [<c0108362>] default_idle+0x36/0x42
[ 1.789535] [<c0101f7c>] cpu_idle+0x4b/0x5f
[ 1.789535] [<c0586925>] start_kernel+0x221/0x261
[ 1.789535] [<c05864d3>] unknown_bootoption+0x0/0x1e3
[ 1.789535] handlers:
[ 1.789535] [<c039e087>] (ata_sff_interrupt+0x0/0x242)
[ 1.789535] Disabling IRQ #11
Full dmesg:
http://home.comcast.net/~jpiszcz/20090125/dmesg20090125.txt
Kernel config:
http://home.comcast.net/~jpiszcz/20090125/2.6.28-config.txt
This never happened with the old IDE layer.
Justin.
On Sun, 25 Jan 2009, Justin Piszcz wrote:
> Switched from the old IDE interface (disabled it) to SATA only in the kernel:
>
> [ 1.788921] irq 11: nobody cared (try booting with the "irqpoll" option)
> [ 1.788978] Pid: 0, comm: swapper Not tainted 2.6.28 #4
> [ 1.789031] Call Trace:
> [ 1.789085] [<c0134153>] __report_bad_irq+0x24/0x81
> [ 1.789138] [<c01342df>] note_interrupt+0x12f/0x170
> [ 1.789191] [<c01338dc>] handle_IRQ_event+0x25/0x4a
> [ 1.789244] [<c01348c4>] handle_level_irq+0x7a/0x90
> [ 1.789299] [<c0104e07>] do_IRQ+0x6f/0x88
> [ 1.789352] [<c012c1c4>] getnstimeofday+0x3b/0xd1
> [ 1.789407] [<c010f150>] smp_apic_timer_interrupt+0x41/0x71
> [ 1.789461] [<c0103973>] common_interrupt+0x23/0x28
> [ 1.789515] [<c011c9bf>] __do_softirq+0x2d/0xea
> [ 1.789535] [<c011caa2>] do_softirq+0x26/0x2e
> [ 1.789535] [<c010f150>] smp_apic_timer_interrupt+0x41/0x71
> [ 1.789535] [<c01039a0>] apic_timer_interrupt+0x28/0x30
> [ 1.789535] [<c0108362>] default_idle+0x36/0x42
> [ 1.789535] [<c0101f7c>] cpu_idle+0x4b/0x5f
> [ 1.789535] [<c0586925>] start_kernel+0x221/0x261
> [ 1.789535] [<c05864d3>] unknown_bootoption+0x0/0x1e3
> [ 1.789535] handlers:
> [ 1.789535] [<c039e087>] (ata_sff_interrupt+0x0/0x242)
> [ 1.789535] Disabling IRQ #11
>
> Full dmesg:
> http://home.comcast.net/~jpiszcz/20090125/dmesg20090125.txt
>
> Kernel config:
> http://home.comcast.net/~jpiszcz/20090125/2.6.28-config.txt
>
> This never happened with the old IDE layer.
>
> Justin.
>
>
Disregard, this was because of a root=UUID option and another root= option
(via LILO cmdline) to get the machine to boot.
Seems to be OK now.
Justin.
On Sun, 25 Jan 2009, Justin Piszcz wrote:
> On Sun, 25 Jan 2009, Justin Piszcz wrote:
>> Switched from the old IDE interface (disabled it) to SATA only in the kernel:
>>
>> [ 1.788921] irq 11: nobody cared (try booting with the "irqpoll" option)
>> [ 1.788978] Pid: 0, comm: swapper Not tainted 2.6.28 #4
>> [ 1.789031] Call Trace:
>> [ 1.789085] [<c0134153>] __report_bad_irq+0x24/0x81
>> [ 1.789138] [<c01342df>] note_interrupt+0x12f/0x170
>> [ 1.789191] [<c01338dc>] handle_IRQ_event+0x25/0x4a
>> [ 1.789244] [<c01348c4>] handle_level_irq+0x7a/0x90
>> [ 1.789299] [<c0104e07>] do_IRQ+0x6f/0x88
>> [ 1.789352] [<c012c1c4>] getnstimeofday+0x3b/0xd1
>> [ 1.789407] [<c010f150>] smp_apic_timer_interrupt+0x41/0x71
>> [ 1.789461] [<c0103973>] common_interrupt+0x23/0x28
>> [ 1.789515] [<c011c9bf>] __do_softirq+0x2d/0xea
>> [ 1.789535] [<c011caa2>] do_softirq+0x26/0x2e
>> [ 1.789535] [<c010f150>] smp_apic_timer_interrupt+0x41/0x71
>> [ 1.789535] [<c01039a0>] apic_timer_interrupt+0x28/0x30
>> [ 1.789535] [<c0108362>] default_idle+0x36/0x42
>> [ 1.789535] [<c0101f7c>] cpu_idle+0x4b/0x5f
>> [ 1.789535] [<c0586925>] start_kernel+0x221/0x261
>> [ 1.789535] [<c05864d3>] unknown_bootoption+0x0/0x1e3
>> [ 1.789535] handlers:
>> [ 1.789535] [<c039e087>] (ata_sff_interrupt+0x0/0x242)
>> [ 1.789535] Disabling IRQ #11
>>
>> Full dmesg:
>> http://home.comcast.net/~jpiszcz/20090125/dmesg20090125.txt
>>
>> Kernel config:
>> http://home.comcast.net/~jpiszcz/20090125/2.6.28-config.txt
>>
>> This never happened with the old IDE layer.
>>
>> Justin.
>>
>>
>
> Disregard, this was because of a root=UUID option and another root=
> option (via LILO cmdline) to get the machine to boot.
Are you sure it is not a bug that should be fixed, anyway?
--
"One disk to rule them all, One disk to find them. One disk to bring
them all and in the darkness grind them. In the Land of Redmond
where the shadows lie." -- The Silicon Valley Tarot
Henrique Holschuh
Justin Piszcz wrote:
> Switched from the old IDE interface (disabled it) to SATA only in the
> kernel:
>
> [ 1.788921] irq 11: nobody cared (try booting with the "irqpoll" option)
> [ 1.788978] Pid: 0, comm: swapper Not tainted 2.6.28 #4
> [ 1.789031] Call Trace:
> [ 1.789085] [<c0134153>] __report_bad_irq+0x24/0x81
> [ 1.789138] [<c01342df>] note_interrupt+0x12f/0x170
> [ 1.789191] [<c01338dc>] handle_IRQ_event+0x25/0x4a
> [ 1.789244] [<c01348c4>] handle_level_irq+0x7a/0x90
> [ 1.789299] [<c0104e07>] do_IRQ+0x6f/0x88
> [ 1.789352] [<c012c1c4>] getnstimeofday+0x3b/0xd1
> [ 1.789407] [<c010f150>] smp_apic_timer_interrupt+0x41/0x71
> [ 1.789461] [<c0103973>] common_interrupt+0x23/0x28
> [ 1.789515] [<c011c9bf>] __do_softirq+0x2d/0xea
> [ 1.789535] [<c011caa2>] do_softirq+0x26/0x2e
> [ 1.789535] [<c010f150>] smp_apic_timer_interrupt+0x41/0x71
> [ 1.789535] [<c01039a0>] apic_timer_interrupt+0x28/0x30
> [ 1.789535] [<c0108362>] default_idle+0x36/0x42
> [ 1.789535] [<c0101f7c>] cpu_idle+0x4b/0x5f
> [ 1.789535] [<c0586925>] start_kernel+0x221/0x261
> [ 1.789535] [<c05864d3>] unknown_bootoption+0x0/0x1e3
> [ 1.789535] handlers:
> [ 1.789535] [<c039e087>] (ata_sff_interrupt+0x0/0x242)
> [ 1.789535] Disabling IRQ #11
>
> Full dmesg:
> http://home.comcast.net/~jpiszcz/20090125/dmesg20090125.txt
>
> Kernel config:
> http://home.comcast.net/~jpiszcz/20090125/2.6.28-config.txt
>
> This never happened with the old IDE layer.
>
> Justin.
>
That presumably is some kind of bug, yes, or oddity of that controller..
OK, who knows pata_pdc2027x hardware? :-)