2000-11-30 22:12:39

by Jorge Boncompte [DTI2]

[permalink] [raw]
Subject: RE: OnStream DI-30 with ide-tape version 1.16f problems

I have the same problem, and yes I have a medium inserted. What can I



P.D. Debian 2.2 (+ some updates from woody to complaint 2.4 series of
2.4.0.test11 + reiserfs
Tyan K7 VIA + CMD649
Same tape drive and same revision of firmware. (primary in the
second channel of the motherboard)

Jorge Boncompte - T?cnico de sistemas
DTI2 - Desarrollo de la Tecnolog?a de las Comunicaciones
C/ Abogado Enriquez Barrios, 5 14004 CORDOBA (SPAIN)
Tlf: +34 957 761395 / FAX: +34 957 450380
[email protected] _-_-_-_-_-_-_-_-_-_-_-_-_-_ http://www.dti2.net
Without wicker a basket cannot be done.

----- Mensaje original -----
De: "Kurt Garloff" <[email protected]>
Para: "Noel Burton-Krahn" <[email protected]>
CC: <[email protected]>; <[email protected]>
Enviado: martes, 17 de octubre de 2000 10:53
Asunto: Re: OnStream DI-30 with ide-tape version 1.16f problems

On Mon, Oct 16, 2000 at 04:51:48PM -0700, Noel Burton-Krahn wrote:
> mt -f /dev/nht0 status
> /dev/nht0: Device or resource busy
> tail /var/log/messages
> kernel: ide-tape: hdd <-> ht0: OnStream DI-30 rev 1.08
> kernel: ide-tape: hdd <-> ht0: 990KBps, 64*32kB buffer, 10208kB
pipeline, 60ms tDSC
> kernel: ide-tape: ht0: I/O error, pc = 0, key = 2, asc = 3a, ascq =


> kernel: ide-tape: ht0: drive not ready

Did you insert a medium?

Kurt Garloff <[email protected]> Eindhoven, NL
GPG key: See mail header, key servers Linux kernel development
SuSE GmbH, Nuernberg, FRG SCSI, Security