Linus,
please pull more ALSA updates for v2.6.30 from:
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6.git for-linus
Mostly small fixes for atmel drivers, usb-audio and others as below.
Still one ASoC driver addition that was missing in the last pull
request, but it's safe to apply as it's a very local one.
Thanks!
Takashi
===
Akinobu Mita (1):
ALSA: hda - add missing comma in ad1884_slave_vols
Anton Vorontsov (1):
ASoC: fsl_dma: Pass the proper device for dma mapping routines
Clemens Ladisch (4):
sound: usb-audio: show sample format width in proc file
sound: usb-audio: remove check_hw_params_convention()
sound: usb-audio: save data packet interval in audioformat structure
sound: usb-audio: allow period sizes less than 1 ms
Dan Carpenter (1):
ASoC: Fix null dereference in ak4535_remove()
Deepika Makhija (1):
ALSA: oss - volume control for CSWITCH and CROUTE
Hans-Christian Egtvedt (10):
ALSA: snd-atmel-ac97c: cleanup register definitions
ALSA: snd-atmel-ac97c: remove dead break statements after return in switch case
ALSA: snd-atmel-ac97c: do not overwrite OCA and ICA when assigning channels
ALSA: snd-atmel-ac97c: set correct size for buffer hardware parameter
ALSA: snd-atmel-ac97c: enable interrupts to catch events for error reporting
ALSA: snd-atmel-ac97c: do a proper reset of the external codec
ALSA: snd-atmel-ac97c: cleanup registers when removing driver
ALSA: snd-atmel-ac97c: replace bus_id with dev_name()
ALSA: snd-atmel-abdac: replace bus_id with dev_name()
ALSA: snd-atmel-abdac: increase periods_min to 6 instead of 4
Jarkko Nikula (1):
ASoC: OMAP: Set minimum buffer size constraint for McBSP2 in OMAP3
Krzysztof Helt (1):
ALSA: opl3sa2: add ZV port control
Luotao Fu (1):
pxa2xx-ac97: fix displaying GSR after reset timeout
Mark Brown (4):
ASoC: Add some documentation for the ASoC jack API
ASoC: Don't defer resume work for AC97 codecs
ASoC: Set parent for AC97 devices we register
ASoC: Implement suspend and resume operations for WM9705
Matthew Ranostay (2):
ALSA: Add 92HD81B1C device id
ALSA: hda - Add VREF powerdown sequence for another board
Peter Ujfalusi (3):
ASoC: TWL4030: 96KHz playback support
ASoC: TWL4030: Add constrains for second stream
ASoC: TWL4030: Add actual support for 96KHz playback support
Philipp Zabel (2):
ASoC: pxa-ssp: Use 16-bit DMA for magician stereo
ASoC: Add Magician machine support
Timur Tabi (2):
ASoC: remove trigger delay in Freescale MPC8610 sound driver
ASoC: trim SSI sysfs statistics in Freescale MPC8610 sound drivers
Uwe Kleine-K?nig (1):
ALSA: move snd_powermac's probe function to .devinit.text
Wu Fengguang (1):
ALSA: hda - enable SPDIF output for Intel DX58SO board
---
Documentation/sound/alsa/soc/jack.txt | 71 +++++
sound/arm/pxa2xx-ac97-lib.c | 15 +-
sound/atmel/abdac.c | 4 +-
sound/atmel/ac97c.c | 128 +++++++--
sound/atmel/ac97c.h | 14 +-
sound/core/oss/mixer_oss.c | 8 +
sound/isa/opl3sa2.c | 1 +
sound/pci/hda/patch_analog.c | 2 +-
sound/pci/hda/patch_realtek.c | 5 +
sound/pci/hda/patch_sigmatel.c | 20 ++
sound/ppc/powermac.c | 2 +-
sound/soc/codecs/ak4535.c | 3 +-
sound/soc/codecs/twl4030.c | 59 ++++-
sound/soc/codecs/twl4030.h | 1 +
sound/soc/codecs/wm9705.c | 37 +++
sound/soc/fsl/fsl_dma.c | 29 ++-
sound/soc/fsl/fsl_ssi.c | 99 +++---
sound/soc/omap/omap-mcbsp.c | 11 +
sound/soc/pxa/Kconfig | 10 +
sound/soc/pxa/Makefile | 2 +
sound/soc/pxa/magician.c | 560 +++++++++++++++++++++++++++++++++
sound/soc/pxa/pxa-ssp.c | 12 +-
sound/soc/soc-core.c | 20 +-
sound/usb/usbaudio.c | 255 +++++++--------
24 files changed, 1133 insertions(+), 235 deletions(-)
create mode 100644 Documentation/sound/alsa/soc/jack.txt
create mode 100644 sound/soc/pxa/magician.c
Hi Takashi,
On Tue, 07 Apr 2009 04:53:04 +0200 Takashi Iwai <[email protected]> wrote:
>
> Peter Ujfalusi (3):
> ASoC: TWL4030: Add constrains for second stream
This commit causes the linux-next tree to fail to build ... see my other
email.
--
Cheers,
Stephen Rothwell [email protected]
http://www.canb.auug.org.au/~sfr/
I encountered this oops with the latest linux git pull. Will this
update fix the problem? When I rolled back to 2.6.29-stable, the sound
works find.
Oops from dmesg ...
HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
hda_intel: probe_mask set to 0x1 for device 17aa:20ac
HDA Intel 0000:00:1b.0: setting latency timer to 64
BUG: unable to handle kernel paging request at 6c000002
IP: [<c023d876>] strcpy+0xe/0x1b
*pdpt = 0000000036836001 *pde = 0000000000000000
Oops: 0000 [#1] PREEMPT SMP
last sysfs file:
/sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda15/dev
Modules linked in: snd_hda_codec_analog snd_hda_intel(+) snd_hda_codec
Pid: 3067, comm: modprobe Not tainted (2.6.29 #3) 7676A24
EIP: 0060:[<c023d876>] EFLAGS: 00010286 CPU: 0
EIP is at strcpy+0xe/0x1b
EAX: f7605d78 EBX: 00000000 ECX: f7605d78 EDX: 6c000002
ESI: 6c000002 EDI: f7605d78 EBP: f7605d50 ESP: f7605d44
DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
Process modprobe (pid: 3067, ti=f7605000 task=f7537020 task.ti=f7605000)
Stack:
00000000 f692b000 f7605da8 f7605db4 fa7e8e53 f7605d68 00000000 00000000
00000000 00000000 00000002 00000000 00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
Call Trace:
[<fa7e8e53>] ? _snd_hda_find_mixer_ctl+0x36/0x4a [snd_hda_codec]
[<fa7e95b0>] ? snd_hda_add_vmaster+0x64/0x8a [snd_hda_codec]
[<f8345420>] ? ad198x_build_controls+0x106/0x150 [snd_hda_codec_analog]
[<fa7e72a8>] ? snd_hda_codec_build_controls+0x20/0x2c [snd_hda_codec]
[<fa7e9df0>] ? snd_hda_build_controls+0x18/0x67 [snd_hda_codec]
[<fa803f81>] ? azx_probe+0x715/0x78a [snd_hda_intel]
[<fa802e29>] ? azx_send_cmd+0x0/0xbf [snd_hda_intel]
[<fa802ee8>] ? azx_get_response+0x0/0x196 [snd_hda_intel]
[<fa8028e0>] ? azx_attach_pcm_stream+0x0/0x133 [snd_hda_intel]
[<c024b934>] ? local_pci_probe+0xe/0x10
[<c024c26a>] ? pci_device_probe+0x48/0x66
[<c02c837f>] ? driver_probe_device+0x7b/0xef
[<c02c8436>] ? __driver_attach+0x43/0x5f
[<c02c7aac>] ? bus_for_each_dev+0x39/0x5a
[<c02c8256>] ? driver_attach+0x14/0x16
[<c02c83f3>] ? __driver_attach+0x0/0x5f
[<c02c7f07>] ? bus_add_driver+0x97/0x1a7
[<c02c863d>] ? driver_register+0x7b/0xd7
[<c024c45b>] ? __pci_register_driver+0x35/0x61
[<fa80a017>] ? alsa_card_azx_init+0x17/0x19 [snd_hda_intel]
[<c0101137>] ? do_one_initcall+0x4a/0x115
[<fa80a000>] ? alsa_card_azx_init+0x0/0x19 [snd_hda_intel]
[<c0144660>] ? sys_init_module+0x87/0x18b
[<c0102a10>] ? sysenter_do_call+0x12/0x2c
Code: ff ff 21 e3 8b 5b 18 83 eb 07 39 d9 73 08 89 01 89 51 04 31 c0
c3 b8 f2 ff ff ff c3 90 55 89 c1 89 e5 57 89 c7 56 89 d6 83 ec 04 <ac>
aa 84 c0 75 fa 5a 89 c8 5e 5f 5d c3 55 89 e5 57 89 c7 56 89
EIP: [<c023d876>] strcpy+0xe/0x1b SS:ESP 0068:f7605d44
CR2: 000000006c000002
---[ end trace 6160ed88b8798d2d ]---
Thanks,
Jeff.
On Tue, Apr 7, 2009 at 10:53 AM, Takashi Iwai <[email protected]> wrote:
> Linus,
>
> please pull more ALSA updates for v2.6.30 from:
>
> ?git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6.git for-linus
>
> Mostly small fixes for atmel drivers, usb-audio and others as below.
> Still one ASoC driver addition that was missing in the last pull
> request, but it's safe to apply as it's a very local one.
>
>
> Thanks!
>
> Takashi
>
> ===
>
> Akinobu Mita (1):
> ? ? ?ALSA: hda - add missing comma in ad1884_slave_vols
>
> Anton Vorontsov (1):
> ? ? ?ASoC: fsl_dma: Pass the proper device for dma mapping routines
>
> Clemens Ladisch (4):
> ? ? ?sound: usb-audio: show sample format width in proc file
> ? ? ?sound: usb-audio: remove check_hw_params_convention()
> ? ? ?sound: usb-audio: save data packet interval in audioformat structure
> ? ? ?sound: usb-audio: allow period sizes less than 1 ms
>
> Dan Carpenter (1):
> ? ? ?ASoC: Fix null dereference in ak4535_remove()
>
> Deepika Makhija (1):
> ? ? ?ALSA: oss - volume control for CSWITCH and CROUTE
>
> Hans-Christian Egtvedt (10):
> ? ? ?ALSA: snd-atmel-ac97c: cleanup register definitions
> ? ? ?ALSA: snd-atmel-ac97c: remove dead break statements after return in switch case
> ? ? ?ALSA: snd-atmel-ac97c: do not overwrite OCA and ICA when assigning channels
> ? ? ?ALSA: snd-atmel-ac97c: set correct size for buffer hardware parameter
> ? ? ?ALSA: snd-atmel-ac97c: enable interrupts to catch events for error reporting
> ? ? ?ALSA: snd-atmel-ac97c: do a proper reset of the external codec
> ? ? ?ALSA: snd-atmel-ac97c: cleanup registers when removing driver
> ? ? ?ALSA: snd-atmel-ac97c: replace bus_id with dev_name()
> ? ? ?ALSA: snd-atmel-abdac: replace bus_id with dev_name()
> ? ? ?ALSA: snd-atmel-abdac: increase periods_min to 6 instead of 4
>
> Jarkko Nikula (1):
> ? ? ?ASoC: OMAP: Set minimum buffer size constraint for McBSP2 in OMAP3
>
> Krzysztof Helt (1):
> ? ? ?ALSA: opl3sa2: add ZV port control
>
> Luotao Fu (1):
> ? ? ?pxa2xx-ac97: fix displaying GSR after reset timeout
>
> Mark Brown (4):
> ? ? ?ASoC: Add some documentation for the ASoC jack API
> ? ? ?ASoC: Don't defer resume work for AC97 codecs
> ? ? ?ASoC: Set parent for AC97 devices we register
> ? ? ?ASoC: Implement suspend and resume operations for WM9705
>
> Matthew Ranostay (2):
> ? ? ?ALSA: Add 92HD81B1C device id
> ? ? ?ALSA: hda - Add VREF powerdown sequence for another board
>
> Peter Ujfalusi (3):
> ? ? ?ASoC: TWL4030: 96KHz playback support
> ? ? ?ASoC: TWL4030: Add constrains for second stream
> ? ? ?ASoC: TWL4030: Add actual support for 96KHz playback support
>
> Philipp Zabel (2):
> ? ? ?ASoC: pxa-ssp: Use 16-bit DMA for magician stereo
> ? ? ?ASoC: Add Magician machine support
>
> Timur Tabi (2):
> ? ? ?ASoC: remove trigger delay in Freescale MPC8610 sound driver
> ? ? ?ASoC: trim SSI sysfs statistics in Freescale MPC8610 sound drivers
>
> Uwe Kleine-K?nig (1):
> ? ? ?ALSA: move snd_powermac's probe function to .devinit.text
>
> Wu Fengguang (1):
> ? ? ?ALSA: hda - enable SPDIF output for Intel DX58SO board
>
> ---
> ?Documentation/sound/alsa/soc/jack.txt | ? 71 +++++
> ?sound/arm/pxa2xx-ac97-lib.c ? ? ? ? ? | ? 15 +-
> ?sound/atmel/abdac.c ? ? ? ? ? ? ? ? ? | ? ?4 +-
> ?sound/atmel/ac97c.c ? ? ? ? ? ? ? ? ? | ?128 +++++++--
> ?sound/atmel/ac97c.h ? ? ? ? ? ? ? ? ? | ? 14 +-
> ?sound/core/oss/mixer_oss.c ? ? ? ? ? ?| ? ?8 +
> ?sound/isa/opl3sa2.c ? ? ? ? ? ? ? ? ? | ? ?1 +
> ?sound/pci/hda/patch_analog.c ? ? ? ? ?| ? ?2 +-
> ?sound/pci/hda/patch_realtek.c ? ? ? ? | ? ?5 +
> ?sound/pci/hda/patch_sigmatel.c ? ? ? ?| ? 20 ++
> ?sound/ppc/powermac.c ? ? ? ? ? ? ? ? ?| ? ?2 +-
> ?sound/soc/codecs/ak4535.c ? ? ? ? ? ? | ? ?3 +-
> ?sound/soc/codecs/twl4030.c ? ? ? ? ? ?| ? 59 ++++-
> ?sound/soc/codecs/twl4030.h ? ? ? ? ? ?| ? ?1 +
> ?sound/soc/codecs/wm9705.c ? ? ? ? ? ? | ? 37 +++
> ?sound/soc/fsl/fsl_dma.c ? ? ? ? ? ? ? | ? 29 ++-
> ?sound/soc/fsl/fsl_ssi.c ? ? ? ? ? ? ? | ? 99 +++---
> ?sound/soc/omap/omap-mcbsp.c ? ? ? ? ? | ? 11 +
> ?sound/soc/pxa/Kconfig ? ? ? ? ? ? ? ? | ? 10 +
> ?sound/soc/pxa/Makefile ? ? ? ? ? ? ? ?| ? ?2 +
> ?sound/soc/pxa/magician.c ? ? ? ? ? ? ?| ?560 +++++++++++++++++++++++++++++++++
> ?sound/soc/pxa/pxa-ssp.c ? ? ? ? ? ? ? | ? 12 +-
> ?sound/soc/soc-core.c ? ? ? ? ? ? ? ? ?| ? 20 +-
> ?sound/usb/usbaudio.c ? ? ? ? ? ? ? ? ?| ?255 +++++++--------
> ?24 files changed, 1133 insertions(+), 235 deletions(-)
> ?create mode 100644 Documentation/sound/alsa/soc/jack.txt
> ?create mode 100644 sound/soc/pxa/magician.c
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to [email protected]
> More majordomo info at ?http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at ?http://www.tux.org/lkml/
>
On Tue, Apr 07, 2009 at 02:04:28PM +0800, Jeff Chua wrote:
> I encountered this oops with the latest linux git pull. Will this
> update fix the problem? When I rolled back to 2.6.29-stable, the sound
> works find.
Yes, I got same oops and found the bug in ad1884_slave_vols table.
But I don't know why the oops doesn't happen with 2.6.29...
At Tue, 7 Apr 2009 14:04:28 +0800,
Jeff Chua wrote:
>
> I encountered this oops with the latest linux git pull. Will this
> update fix the problem? When I rolled back to 2.6.29-stable, the sound
> works find.
>
> Oops from dmesg ...
Judging also from other bug reports, this looks like Analog codec
specific. Likely it's a typo or so...
Could you add probe_only=1 module option and load the module, then
run alsa-info.sh output with --no-upload option and attach the
generated file? The script is found at
http://www.alsa-project.org/alsa-info.sh
(BTW, I'm on vacation now, and I'll check this bug after Easter
holidays. Sorry for inconvenience.)
thanks,
Takashi
On Wed, Apr 8, 2009 at 9:53 AM, Takashi Iwai <[email protected]> wrote:
> At Tue, 7 Apr 2009 14:04:28 +0800,
> Jeff Chua wrote:
>>
>> I encountered this oops with the latest linux git pull. Will this
>> update fix the problem? When I rolled back to 2.6.29-stable, the sound
>> works find.
>>
>> Oops from dmesg ...
>
> Judging also from other bug reports, this looks like Analog codec
> specific. ?Likely it's a typo or so...
>
> Could you add probe_only=1 module option and load the module, then
> run alsa-info.sh output with --no-upload option and attach the
> generated file? ?The script is found at
> ? ?http://www.alsa-project.org/alsa-info.sh
>
> (BTW, I'm on vacation now, and I'll check this bug after Easter
> ?holidays. ?Sorry for inconvenience.)
Good news is the latest linux git pull today makes the HDA opps go
away. It's all good now.
Thanks and Happy Easter!
Jeff.
At Wed, 8 Apr 2009 20:56:11 +0800,
Jeff Chua wrote:
>
> On Wed, Apr 8, 2009 at 9:53 AM, Takashi Iwai <[email protected]> wrote:
> > At Tue, 7 Apr 2009 14:04:28 +0800,
> > Jeff Chua wrote:
> >>
> >> I encountered this oops with the latest linux git pull. Will this
> >> update fix the problem? When I rolled back to 2.6.29-stable, the sound
> >> works find.
> >>
> >> Oops from dmesg ...
> >
> > Judging also from other bug reports, this looks like Analog codec
> > specific. ?Likely it's a typo or so...
> >
> > Could you add probe_only=1 module option and load the module, then
> > run alsa-info.sh output with --no-upload option and attach the
> > generated file? ?The script is found at
> > ? ?http://www.alsa-project.org/alsa-info.sh
> >
> > (BTW, I'm on vacation now, and I'll check this bug after Easter
> > ?holidays. ?Sorry for inconvenience.)
>
> Good news is the latest linux git pull today makes the HDA opps go
> away. It's all good now.
Good to know. It must be Mita-san's patch to fix my typo.
Two strings were concatenated due to lack of comma, and resulted in a
too long string over the fixed size array. I'll add strlen check or
use strlcpy to make it safer later.
thanks,
Takashi