Hi
I try to use packet-cd patch for writing cdrw as block
device
Now I install kernel 2.4.19-pre3-ac1 and latest packet patch
packet-2.4.19-pre2.patch.bz2
But I has same situation with 2.4.19-pre2-ac2
Packet drivers load successfully and pktsetup work OK (may
be). But when I try to do mount and got kernel oops
Decoded oops I insert bottom.
I ask about this trouble in packet-cd maillist but they said
to problem seems in udf module.
Can someone help me (Also in packet-cd maillist I read
messages about successful usage packet software in pure
kernel, not ac)?
There is decoded oops
ksymoops 2.4.1 on i686 2.4.19-pre3-ac1. Options used
-V (default)
-k /proc/ksyms (default)
-l /proc/modules (default)
-o /lib/modules/2.4.19-pre3-ac1/ (default)
-m /boot/System.map-2.4.19-pre3-ac1 (default)
Warning: You did not tell me where to find symbol information. I will
assume that the log matches the kernel and modules that are running
right now and I'll use the default options above for symbol resolution.
If the current kernel and/or modules do not match the log, you can get
more accurate output by telling me the kernel version and where to find
map, modules, ksyms etc. ksymoops -h explains the options.
Warning (compare_maps): ksyms_base symbol vmalloc_to_page_R__ver_vmalloc_to_page not found in System.map. Ignoring ksyms_base entry
Warning (compare_maps): mismatch on symbol scsi_CDs , sr_mod says d29a57c4, /lib/modules/2.4.19-pre3-ac1/kernel/drivers/scsi/sr_mod.o says d29a56e0. Ignoring /lib/modules/2.4.19-pre3-ac1/kernel/drivers/scsi/sr_mod.o entry
Warning (compare_maps): mismatch on symbol tulip_max_interrupt_work , tulip says d299418c, /lib/modules/2.4.19-pre3-ac1/kernel/drivers/net/tulip/tulip.o says d2993a8c. Ignoring /lib/modules/2.4.19-pre3-ac1/kernel/drivers/net/tulip/tulip.o entry
Warning (compare_maps): mismatch on symbol tulip_rx_copybreak , tulip says d2994190, /lib/modules/2.4.19-pre3-ac1/kernel/drivers/net/tulip/tulip.o says d2993a90. Ignoring /lib/modules/2.4.19-pre3-ac1/kernel/drivers/net/tulip/tulip.o entry
Warning (compare_maps): mismatch on symbol proc_scsi , scsi_mod says d29309e4, /lib/modules/2.4.19-pre3-ac1/kernel/drivers/scsi/scsi_mod.o says d29303e4. Ignoring /lib/modules/2.4.19-pre3-ac1/kernel/drivers/scsi/scsi_mod.o entry
Warning (compare_maps): mismatch on symbol scsi_devicelist , scsi_mod says d2930a10, /lib/modules/2.4.19-pre3-ac1/kernel/drivers/scsi/scsi_mod.o says d2930410. Ignoring /lib/modules/2.4.19-pre3-ac1/kernel/drivers/scsi/scsi_mod.o entry
Warning (compare_maps): mismatch on symbol scsi_hostlist , scsi_mod says d2930a0c, /lib/modules/2.4.19-pre3-ac1/kernel/drivers/scsi/scsi_mod.o says d293040c. Ignoring /lib/modules/2.4.19-pre3-ac1/kernel/drivers/scsi/scsi_mod.o entry
Warning (compare_maps): mismatch on symbol scsi_hosts , scsi_mod says d2930a14, /lib/modules/2.4.19-pre3-ac1/kernel/drivers/scsi/scsi_mod.o says d2930414. Ignoring /lib/modules/2.4.19-pre3-ac1/kernel/drivers/scsi/scsi_mod.o entry
cpu: 0, clocks: 2675875, slice: 1337937
UDF-fs DEBUG lowlevel.c:57:udf_get_last_session: XA disk: no, vol_desc_start=0
UDF-fs DEBUG super.c:1413:udf_read_super: Multi-session=0
UDF-fs DEBUG super.c:410:udf_vrs: Starting at sector 16 (2048 byte sectors)
Unable to handle kernel NULL pointer dereference at virtual address 00000174
d4d52781
*pde = 00000000
Oops: 0000
CPU: 0
EIP: 0010:[<d4d52781>] Not tainted
Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 00010282
eax: 00000140 ebx: 00008000 ecx: 0000000b edx: c7f70440
esi: 00000120 edi: c6bab110 ebp: c6bab000 esp: c36e9db0
ds: 0018 es: 0018 ss: 0018
Process mount (pid: 1139, stackpage=c36e9000)
Stack: c6bab000 00000100 00000100 c36e9dda 00000246 00000000 c6bab0e4 cb6671c0
00000003 00000140 0002b000 00000000 c6bab000 d4d52290 c6bab000 c6bab040
c6bab000 00000000 c36e9e3c d4d52f43 c6bab000 c36e9e3c 00000000 d4d57a27
Call Trace: [<d4d52290>] [<d4d52f43>] [<d4d57a27>] [<d29262e3>] [<d29a2193>]
[<d2911f00>] [<d291ffff>] [<c013fa54>] [<c0150eec>] [<c0150e3a>] [<d4d59060>]
[<c01400ae>] [<d4d59060>] [<c0151f7e>] [<c0152260>] [<c01520a9>] [<c0152371>]
[<c0107423>]
Code: 8b 40 34 d3 fb 01 f3 8b 68 18 89 14 24 d3 fd 03 6c 24 24 e8
>>EIP; d4d52781 <[udf]udf_load_partition+491/500> <=====
Trace; d4d52290 <[udf]udf_check_valid+60/c0>
Trace; d4d52f43 <[udf]udf_read_super+453/700>
Trace; d4d57a27 <[udf].LC6+11a/1593>
Trace; d29262e3 <[scsi_mod]scsi_ioctl+f3/3c0>
Trace; d29a2193 <[sr_mod]sr_media_change+53/e0>
Trace; d2911f00 <[cdrom]media_changed+0/90>
Trace; d291ffff <[ide-cd].rodata.end+600/1b61>
Trace; c013fa54 <get_sb_bdev+1e4/2d0>
Trace; c0150eec <set_devname+3c/90>
Trace; c0150e3a <alloc_vfsmnt+3a/70>
Trace; d4d59060 <[udf]udf_fstype+0/20>
Trace; c01400ae <do_kern_mount+17e/1b0>
Trace; d4d59060 <[udf]udf_fstype+0/20>
Trace; c0151f7e <do_add_mount+2e/e0>
Trace; c0152260 <do_mount+160/1c0>
Trace; c01520a9 <copy_mount_options+79/d0>
Trace; c0152371 <sys_mount+b1/e0>
Trace; c0107423 <system_call+33/38>
Code; d4d52781 <[udf]udf_load_partition+491/500>
00000000 <_EIP>:
Code; d4d52781 <[udf]udf_load_partition+491/500> <=====
0: 8b 40 34 mov 0x34(%eax),%eax <=====
Code; d4d52784 <[udf]udf_load_partition+494/500>
3: d3 fb sar %cl,%ebx
Code; d4d52786 <[udf]udf_load_partition+496/500>
5: 01 f3 add %esi,%ebx
Code; d4d52788 <[udf]udf_load_partition+498/500>
7: 8b 68 18 mov 0x18(%eax),%ebp
Code; d4d5278b <[udf]udf_load_partition+49b/500>
a: 89 14 24 mov %edx,(%esp,1)
Code; d4d5278e <[udf]udf_load_partition+49e/500>
d: d3 fd sar %cl,%ebp
Code; d4d52790 <[udf]udf_load_partition+4a0/500>
f: 03 6c 24 24 add 0x24(%esp,1),%ebp
Code; d4d52794 <[udf]udf_load_partition+4a4/500>
13: e8 00 00 00 00 call 18 <_EIP+0x18> d4d52799 <[udf]udf_load_partition+4a9/500>
9 warnings issued. Results may not be reliable.
--
Best regard, Alexander Trotsai aka MAGE-RIPE aka MAGE-UANIC
My PGP at ftp://blackhole.adamant.net/pgp/trotsai.key[.asc]
Big trouble - bugs in the RAID