2009-10-02 02:21:52

by Shawn Starr

Subject: [PROBLEM][2.6.31.1] - Cannot burn DVDs - PIONEER DVD-RW DVR-111D

Model is:
Unable to burn DVDs with 2.6.31.x

ata7.00: ATAPI: PIONEER DVD-RW DVR-111D, 1.29, max UDMA/66
scsi 6:0:0:0: CD-ROM PIONEER DVD-RW DVR-111D 1.29 PQ: 0 ANSI: 5

sr 6:0:0:0: [sr0] Unhandled sense code
sr 6:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 6:0:0:0: [sr0] Sense Key : Medium Error [current]
Info fld=0x0
sr 6:0:0:0: [sr0] Add. Sense: L-EC uncorrectable error
end_request: I/O error, dev sr0, sector 0
Buffer I/O error on device sr0, logical block 0

wodim (cdrecord):

Errno: 5 (Input/output error), reserve track scsi sendcmd: no error
CDB: 53 00 00 00 00 00 1D 60 3C 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0E 00 00 00 00 21 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x21 Qual 0x00 (logical block address out of range) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.006s timeout 40s
wodim: Cannot open new session.

I thought maybe this was due to something with kernel config but I'm not sure
now. This used to work fine.

Anyone also able to confirm something broke or if I'm enabling something in
.config I shouldn't be?

Thanks,
Shawn.

2009-10-02 14:46:49

by Jeff Garzik

Subject: Re: [PROBLEM][2.6.31.1] - Cannot burn DVDs - PIONEER DVD-RW DVR-111D

On 10/01/2009 10:15 PM, Shawn Starr wrote:
>
> Model is:
> Unable to burn DVDs with 2.6.31.x
>
> ata7.00: ATAPI: PIONEER DVD-RW DVR-111D, 1.29, max UDMA/66
> scsi 6:0:0:0: CD-ROM PIONEER DVD-RW DVR-111D 1.29 PQ: 0 ANSI: 5
>
> sr 6:0:0:0: [sr0] Unhandled sense code
> sr 6:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
> sr 6:0:0:0: [sr0] Sense Key : Medium Error [current]
> Info fld=0x0
> sr 6:0:0:0: [sr0] Add. Sense: L-EC uncorrectable error
> end_request: I/O error, dev sr0, sector 0
> Buffer I/O error on device sr0, logical block 0
>
> wodim (cdrecord):
>
> Errno: 5 (Input/output error), reserve track scsi sendcmd: no error
> CDB: 53 00 00 00 00 00 1D 60 3C 00
> status: 0x2 (CHECK CONDITION)
> Sense Bytes: 70 00 05 00 00 00 00 0E 00 00 00 00 21 00 00 00
> Sense Key: 0x5 Illegal Request, Segment 0
> Sense Code: 0x21 Qual 0x00 (logical block address out of range) Fru 0x0
> Sense flags: Blk 0 (not valid)
> cmd finished after 0.006s timeout 40s
> wodim: Cannot open new session.
>
> I thought maybe this was due to something with kernel config but I'm not sure
> now. This used to work fine.
>
> Anyone also able to confirm something broke or if I'm enabling something in
> .config I shouldn't be?

Can you post full dmesg output? And you have verified that vanilla
2.6.30 kernel works OK?

Jeff