Remove include/linux/perf_counter.h because it's not used anymore after
one of Ingo's patch:
commit cdd6c482c9ff9c55475ee7392ec8f672eddb7be6
Author: Ingo Molnar <[email protected]>
Date: Mon Sep 21 12:02:48 2009 +0200
perf: Do the big rename: Performance Counters -> Performance Events
Signed-off-by: Xiao Guangrong <[email protected]>
---
include/linux/perf_counter.h | 441 ------------------------------------------
1 files changed, 0 insertions(+), 441 deletions(-)
delete mode 100644 include/linux/perf_counter.h
diff --git a/include/linux/perf_counter.h b/include/linux/perf_counter.h
deleted file mode 100644
index 7b7fbf4..0000000
--- a/include/linux/perf_counter.h
+++ /dev/null
@@ -1,441 +0,0 @@
-/*
- * NOTE: this file will be removed in a future kernel release, it is
- * provided as a courtesy copy of user-space code that relies on the
- * old (pre-rename) symbols and constants.
- *
- * Performance events:
- *
- * Copyright (C) 2008-2009, Thomas Gleixner <[email protected]>
- * Copyright (C) 2008-2009, Red Hat, Inc., Ingo Molnar
- * Copyright (C) 2008-2009, Red Hat, Inc., Peter Zijlstra
- *
- * Data type definitions, declarations, prototypes.
- *
- * Started by: Thomas Gleixner and Ingo Molnar
- *
- * For licencing details see kernel-base/COPYING
- */
-#ifndef _LINUX_PERF_COUNTER_H
-#define _LINUX_PERF_COUNTER_H
-
-#include <linux/types.h>
-#include <linux/ioctl.h>
-#include <asm/byteorder.h>
-
-/*
- * User-space ABI bits:
- */
-
-/*
- * attr.type
- */
-enum perf_type_id {
- PERF_TYPE_HARDWARE = 0,
- PERF_TYPE_SOFTWARE = 1,
- PERF_TYPE_TRACEPOINT = 2,
- PERF_TYPE_HW_CACHE = 3,
- PERF_TYPE_RAW = 4,
-
- PERF_TYPE_MAX, /* non-ABI */
-};
-
-/*
- * Generalized performance counter event types, used by the
- * attr.event_id parameter of the sys_perf_counter_open()
- * syscall:
- */
-enum perf_hw_id {
- /*
- * Common hardware events, generalized by the kernel:
- */
- PERF_COUNT_HW_CPU_CYCLES = 0,
- PERF_COUNT_HW_INSTRUCTIONS = 1,
- PERF_COUNT_HW_CACHE_REFERENCES = 2,
- PERF_COUNT_HW_CACHE_MISSES = 3,
- PERF_COUNT_HW_BRANCH_INSTRUCTIONS = 4,
- PERF_COUNT_HW_BRANCH_MISSES = 5,
- PERF_COUNT_HW_BUS_CYCLES = 6,
-
- PERF_COUNT_HW_MAX, /* non-ABI */
-};
-
-/*
- * Generalized hardware cache counters:
- *
- * { L1-D, L1-I, LLC, ITLB, DTLB, BPU } x
- * { read, write, prefetch } x
- * { accesses, misses }
- */
-enum perf_hw_cache_id {
- PERF_COUNT_HW_CACHE_L1D = 0,
- PERF_COUNT_HW_CACHE_L1I = 1,
- PERF_COUNT_HW_CACHE_LL = 2,
- PERF_COUNT_HW_CACHE_DTLB = 3,
- PERF_COUNT_HW_CACHE_ITLB = 4,
- PERF_COUNT_HW_CACHE_BPU = 5,
-
- PERF_COUNT_HW_CACHE_MAX, /* non-ABI */
-};
-
-enum perf_hw_cache_op_id {
- PERF_COUNT_HW_CACHE_OP_READ = 0,
- PERF_COUNT_HW_CACHE_OP_WRITE = 1,
- PERF_COUNT_HW_CACHE_OP_PREFETCH = 2,
-
- PERF_COUNT_HW_CACHE_OP_MAX, /* non-ABI */
-};
-
-enum perf_hw_cache_op_result_id {
- PERF_COUNT_HW_CACHE_RESULT_ACCESS = 0,
- PERF_COUNT_HW_CACHE_RESULT_MISS = 1,
-
- PERF_COUNT_HW_CACHE_RESULT_MAX, /* non-ABI */
-};
-
-/*
- * Special "software" counters provided by the kernel, even if the hardware
- * does not support performance counters. These counters measure various
- * physical and sw events of the kernel (and allow the profiling of them as
- * well):
- */
-enum perf_sw_ids {
- PERF_COUNT_SW_CPU_CLOCK = 0,
- PERF_COUNT_SW_TASK_CLOCK = 1,
- PERF_COUNT_SW_PAGE_FAULTS = 2,
- PERF_COUNT_SW_CONTEXT_SWITCHES = 3,
- PERF_COUNT_SW_CPU_MIGRATIONS = 4,
- PERF_COUNT_SW_PAGE_FAULTS_MIN = 5,
- PERF_COUNT_SW_PAGE_FAULTS_MAJ = 6,
-
- PERF_COUNT_SW_MAX, /* non-ABI */
-};
-
-/*
- * Bits that can be set in attr.sample_type to request information
- * in the overflow packets.
- */
-enum perf_counter_sample_format {
- PERF_SAMPLE_IP = 1U << 0,
- PERF_SAMPLE_TID = 1U << 1,
- PERF_SAMPLE_TIME = 1U << 2,
- PERF_SAMPLE_ADDR = 1U << 3,
- PERF_SAMPLE_READ = 1U << 4,
- PERF_SAMPLE_CALLCHAIN = 1U << 5,
- PERF_SAMPLE_ID = 1U << 6,
- PERF_SAMPLE_CPU = 1U << 7,
- PERF_SAMPLE_PERIOD = 1U << 8,
- PERF_SAMPLE_STREAM_ID = 1U << 9,
- PERF_SAMPLE_RAW = 1U << 10,
-
- PERF_SAMPLE_MAX = 1U << 11, /* non-ABI */
-};
-
-/*
- * The format of the data returned by read() on a perf counter fd,
- * as specified by attr.read_format:
- *
- * struct read_format {
- * { u64 value;
- * { u64 time_enabled; } && PERF_FORMAT_ENABLED
- * { u64 time_running; } && PERF_FORMAT_RUNNING
- * { u64 id; } && PERF_FORMAT_ID
- * } && !PERF_FORMAT_GROUP
- *
- * { u64 nr;
- * { u64 time_enabled; } && PERF_FORMAT_ENABLED
- * { u64 time_running; } && PERF_FORMAT_RUNNING
- * { u64 value;
- * { u64 id; } && PERF_FORMAT_ID
- * } cntr[nr];
- * } && PERF_FORMAT_GROUP
- * };
- */
-enum perf_counter_read_format {
- PERF_FORMAT_TOTAL_TIME_ENABLED = 1U << 0,
- PERF_FORMAT_TOTAL_TIME_RUNNING = 1U << 1,
- PERF_FORMAT_ID = 1U << 2,
- PERF_FORMAT_GROUP = 1U << 3,
-
- PERF_FORMAT_MAX = 1U << 4, /* non-ABI */
-};
-
-#define PERF_ATTR_SIZE_VER0 64 /* sizeof first published struct */
-
-/*
- * Hardware event to monitor via a performance monitoring counter:
- */
-struct perf_counter_attr {
-
- /*
- * Major type: hardware/software/tracepoint/etc.
- */
- __u32 type;
-
- /*
- * Size of the attr structure, for fwd/bwd compat.
- */
- __u32 size;
-
- /*
- * Type specific configuration information.
- */
- __u64 config;
-
- union {
- __u64 sample_period;
- __u64 sample_freq;
- };
-
- __u64 sample_type;
- __u64 read_format;
-
- __u64 disabled : 1, /* off by default */
- inherit : 1, /* children inherit it */
- pinned : 1, /* must always be on PMU */
- exclusive : 1, /* only group on PMU */
- exclude_user : 1, /* don't count user */
- exclude_kernel : 1, /* ditto kernel */
- exclude_hv : 1, /* ditto hypervisor */
- exclude_idle : 1, /* don't count when idle */
- mmap : 1, /* include mmap data */
- comm : 1, /* include comm data */
- freq : 1, /* use freq, not period */
- inherit_stat : 1, /* per task counts */
- enable_on_exec : 1, /* next exec enables */
- task : 1, /* trace fork/exit */
- watermark : 1, /* wakeup_watermark */
-
- __reserved_1 : 49;
-
- union {
- __u32 wakeup_events; /* wakeup every n events */
- __u32 wakeup_watermark; /* bytes before wakeup */
- };
- __u32 __reserved_2;
-
- __u64 __reserved_3;
-};
-
-/*
- * Ioctls that can be done on a perf counter fd:
- */
-#define PERF_COUNTER_IOC_ENABLE _IO ('$', 0)
-#define PERF_COUNTER_IOC_DISABLE _IO ('$', 1)
-#define PERF_COUNTER_IOC_REFRESH _IO ('$', 2)
-#define PERF_COUNTER_IOC_RESET _IO ('$', 3)
-#define PERF_COUNTER_IOC_PERIOD _IOW('$', 4, u64)
-#define PERF_COUNTER_IOC_SET_OUTPUT _IO ('$', 5)
-
-enum perf_counter_ioc_flags {
- PERF_IOC_FLAG_GROUP = 1U << 0,
-};
-
-/*
- * Structure of the page that can be mapped via mmap
- */
-struct perf_counter_mmap_page {
- __u32 version; /* version number of this structure */
- __u32 compat_version; /* lowest version this is compat with */
-
- /*
- * Bits needed to read the hw counters in user-space.
- *
- * u32 seq;
- * s64 count;
- *
- * do {
- * seq = pc->lock;
- *
- * barrier()
- * if (pc->index) {
- * count = pmc_read(pc->index - 1);
- * count += pc->offset;
- * } else
- * goto regular_read;
- *
- * barrier();
- * } while (pc->lock != seq);
- *
- * NOTE: for obvious reason this only works on self-monitoring
- * processes.
- */
- __u32 lock; /* seqlock for synchronization */
- __u32 index; /* hardware counter identifier */
- __s64 offset; /* add to hardware counter value */
- __u64 time_enabled; /* time counter active */
- __u64 time_running; /* time counter on cpu */
-
- /*
- * Hole for extension of the self monitor capabilities
- */
-
- __u64 __reserved[123]; /* align to 1k */
-
- /*
- * Control data for the mmap() data buffer.
- *
- * User-space reading the @data_head value should issue an rmb(), on
- * SMP capable platforms, after reading this value -- see
- * perf_counter_wakeup().
- *
- * When the mapping is PROT_WRITE the @data_tail value should be
- * written by userspace to reflect the last read data. In this case
- * the kernel will not over-write unread data.
- */
- __u64 data_head; /* head in the data section */
- __u64 data_tail; /* user-space written tail */
-};
-
-#define PERF_EVENT_MISC_CPUMODE_MASK (3 << 0)
-#define PERF_EVENT_MISC_CPUMODE_UNKNOWN (0 << 0)
-#define PERF_EVENT_MISC_KERNEL (1 << 0)
-#define PERF_EVENT_MISC_USER (2 << 0)
-#define PERF_EVENT_MISC_HYPERVISOR (3 << 0)
-
-struct perf_event_header {
- __u32 type;
- __u16 misc;
- __u16 size;
-};
-
-enum perf_event_type {
-
- /*
- * The MMAP events record the PROT_EXEC mappings so that we can
- * correlate userspace IPs to code. They have the following structure:
- *
- * struct {
- * struct perf_event_header header;
- *
- * u32 pid, tid;
- * u64 addr;
- * u64 len;
- * u64 pgoff;
- * char filename[];
- * };
- */
- PERF_EVENT_MMAP = 1,
-
- /*
- * struct {
- * struct perf_event_header header;
- * u64 id;
- * u64 lost;
- * };
- */
- PERF_EVENT_LOST = 2,
-
- /*
- * struct {
- * struct perf_event_header header;
- *
- * u32 pid, tid;
- * char comm[];
- * };
- */
- PERF_EVENT_COMM = 3,
-
- /*
- * struct {
- * struct perf_event_header header;
- * u32 pid, ppid;
- * u32 tid, ptid;
- * u64 time;
- * };
- */
- PERF_EVENT_EXIT = 4,
-
- /*
- * struct {
- * struct perf_event_header header;
- * u64 time;
- * u64 id;
- * u64 stream_id;
- * };
- */
- PERF_EVENT_THROTTLE = 5,
- PERF_EVENT_UNTHROTTLE = 6,
-
- /*
- * struct {
- * struct perf_event_header header;
- * u32 pid, ppid;
- * u32 tid, ptid;
- * u64 time;
- * };
- */
- PERF_EVENT_FORK = 7,
-
- /*
- * struct {
- * struct perf_event_header header;
- * u32 pid, tid;
- *
- * struct read_format values;
- * };
- */
- PERF_EVENT_READ = 8,
-
- /*
- * struct {
- * struct perf_event_header header;
- *
- * { u64 ip; } && PERF_SAMPLE_IP
- * { u32 pid, tid; } && PERF_SAMPLE_TID
- * { u64 time; } && PERF_SAMPLE_TIME
- * { u64 addr; } && PERF_SAMPLE_ADDR
- * { u64 id; } && PERF_SAMPLE_ID
- * { u64 stream_id;} && PERF_SAMPLE_STREAM_ID
- * { u32 cpu, res; } && PERF_SAMPLE_CPU
- * { u64 period; } && PERF_SAMPLE_PERIOD
- *
- * { struct read_format values; } && PERF_SAMPLE_READ
- *
- * { u64 nr,
- * u64 ips[nr]; } && PERF_SAMPLE_CALLCHAIN
- *
- * #
- * # The RAW record below is opaque data wrt the ABI
- * #
- * # That is, the ABI doesn't make any promises wrt to
- * # the stability of its content, it may vary depending
- * # on event, hardware, kernel version and phase of
- * # the moon.
- * #
- * # In other words, PERF_SAMPLE_RAW contents are not an ABI.
- * #
- *
- * { u32 size;
- * char data[size];}&& PERF_SAMPLE_RAW
- * };
- */
- PERF_EVENT_SAMPLE = 9,
-
- PERF_EVENT_MAX, /* non-ABI */
-};
-
-enum perf_callchain_context {
- PERF_CONTEXT_HV = (__u64)-32,
- PERF_CONTEXT_KERNEL = (__u64)-128,
- PERF_CONTEXT_USER = (__u64)-512,
-
- PERF_CONTEXT_GUEST = (__u64)-2048,
- PERF_CONTEXT_GUEST_KERNEL = (__u64)-2176,
- PERF_CONTEXT_GUEST_USER = (__u64)-2560,
-
- PERF_CONTEXT_MAX = (__u64)-4095,
-};
-
-#define PERF_FLAG_FD_NO_GROUP (1U << 0)
-#define PERF_FLAG_FD_OUTPUT (1U << 1)
-
-/*
- * In case some app still references the old symbols:
- */
-
-#define __NR_perf_counter_open __NR_perf_event_open
-
-#define PR_TASK_PERF_COUNTERS_DISABLE PR_TASK_PERF_EVENTS_DISABLE
-#define PR_TASK_PERF_COUNTERS_ENABLE PR_TASK_PERF_EVENTS_ENABLE
-
-#endif /* _LINUX_PERF_COUNTER_H */
--
1.6.1.2
On Wed, 2009-10-07 at 17:29 +0800, Xiao Guangrong wrote:
> Remove include/linux/perf_counter.h because it's not used anymore after
> one of Ingo's patch:
The intent was to keep it around for one more release so as to not
inconvenience userspace that relied on it too much, ie. give them time
to convert.
* Xiao Guangrong <[email protected]> wrote:
> Remove include/linux/perf_counter.h because it's not used anymore
> after one of Ingo's patch:
Please read the explanation in the file about why we left it in place:
> --- a/include/linux/perf_counter.h
> +++ /dev/null
> @@ -1,441 +0,0 @@
> -/*
> - * NOTE: this file will be removed in a future kernel release, it is
> - * provided as a courtesy copy of user-space code that relies on the
> - * old (pre-rename) symbols and constants.
Ingo
* Peter Zijlstra <[email protected]> wrote:
> On Wed, 2009-10-07 at 17:29 +0800, Xiao Guangrong wrote:
> > Remove include/linux/perf_counter.h because it's not used anymore after
> > one of Ingo's patch:
>
> The intent was to keep it around for one more release so as to not
> inconvenience userspace that relied on it too much, ie. give them time
> to convert.
yeah. There's no real cost in keeping it around. We can remove it in .34
or .35.
Ingo
Ingo Molnar wrote:
> * Peter Zijlstra <[email protected]> wrote:
>
>> On Wed, 2009-10-07 at 17:29 +0800, Xiao Guangrong wrote:
>>> Remove include/linux/perf_counter.h because it's not used anymore after
>>> one of Ingo's patch:
>> The intent was to keep it around for one more release so as to not
>> inconvenience userspace that relied on it too much, ie. give them time
>> to convert.
>
> yeah. There's no real cost in keeping it around. We can remove it in .34
> or .35.
>
Ah, my mistake, sorry for disturb you all.
Thanks,
Xiao