Everything seems to work, though. Didn't happen in t12pre5.
Excerpt from dmesg:
Linux PCMCIA Card Services 3.1.22
options: [pci] [cardbus] [pm]
PCI: Found IRQ 11 for device 00:03.0
PCI: The same IRQ used for device 00:03.1
PCI: The same IRQ used for device 00:07.2
PCI: Found IRQ 11 for device 00:03.1
PCI: The same IRQ used for device 00:03.0
PCI: The same IRQ used for device 00:07.2
Yenta IRQ list 0618, PCI irq11
Socket status: 30000020
Yenta IRQ list 0618, PCI irq11
Socket status: 30000006
cs: cb_alloc(bus 5): vendor 0x115d, device 0x0003
got res[1800:187f] for resource 0 of PCI device 115d:0003
got res[11000000:110007ff] for resource 1 of PCI device 115d:0003
got res[11000800:11000fff] for resource 2 of PCI device 115d:0003
got res[10c00000:10c03fff] for resource 6 of PCI device 115d:0003
PCI: Enabling device 05:00.0 (0000 -> 0003)
IRQ routing conflict in pirq table! Try 'pci=autoirq'
got res[1880:1887] for resource 0 of PCI device 115d:0103
got res[11001000:110017ff] for resource 1 of PCI device 115d:0103
got res[11001800:11001fff] for resource 2 of PCI device 115d:0103
got res[10c04000:10c07fff] for resource 6 of PCI device 115d:0103
PCI: Enabling device 05:00.1 (0000 -> 0003)
IRQ routing conflict in pirq table! Try 'pci=autoirq'
tulip_attach(05:00.0)
PCI: Found IRQ 11 for device 05:00.0
PCI: The same IRQ used for device 00:03.0
PCI: The same IRQ used for device 00:03.1
PCI: The same IRQ used for device 00:07.2
PCI: The same IRQ used for device 05:00.1
PCI: Setting latency timer of device 05:00.0 to 64
xircom_tulip_cb.c:v0.91 4/14/99 [email protected] (modified by [email protected] for XIRCOM CBE, fixed by Doug Ledford)
eth0: Xircom Cardbus Adapter (DEC 21143 compatible mode) rev 3 at 0x1800, 00:10:A4:F9:19:A0, IRQ 11.
eth0: MII transceiver #0 config 3100 status 7809 advertising 01e1.
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0800-0x08ff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x210-0x217 0x290-0x297 0x378-0x37f 0x388-0x38f 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
PCI: Found IRQ 11 for device 05:00.1
PCI: The same IRQ used for device 00:03.0
PCI: The same IRQ used for device 00:03.1
PCI: The same IRQ used for device 00:07.2
PCI: The same IRQ used for device 05:00.0
This is a Dell Latitude CPi D300XT with a:
PCI: Using IRQ router PIIX [8086/7110] at 00:07.0
got res[10000000:10000fff] for resource 0 of Texas Instruments PCI1131
got res[10001000:10001fff] for resource 0 of Texas Instruments PCI1131 (#2)
Thanks & ciao,
--
--alessandro <[email protected]> <[email protected]>
Linux: kernel 2.2.18p24/2.4.0-t12p6 glibc-2.2 gcc-2.95.2 binutils-2.10.1.0.2
Oracle: Oracle8i 8.1.7.0.0 Enterprise Edition for Linux
motto: Tell the truth, there's less to remember.