-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Hi
I have tried to install a usb printer but I have no /dev/usb.
Usb drivers / usb printer installed (in kernel / module)
Do I have to create the folders /dev/usb and the things that are in there ?
Why ? ;)
thanks
have fun
Felix
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.0.6 (GNU/Linux)
Comment: For info see http://www.gnupg.org
iD8DBQE8seo5S0DOrvdnsewRAmjEAJwJfGIHjTSfX9IQEDk0qswQnPUq5gCeKj/3
pWRFGiU6pmViP0A+1zhFQto=
=fUQz
-----END PGP SIGNATURE-----
On Mon, Apr 08, 2002 at 09:06:33PM +0200, Felix Seeger wrote:
> Hi
>
> I have tried to install a usb printer but I have no /dev/usb.
>
> Usb drivers / usb printer installed (in kernel / module)
>
> Do I have to create the folders /dev/usb and the things that are in there ?
If you are not using devfs, yes.
> Why ? ;)
Welcome to Unix :)
thanks,
greg k-h
Am Dienstag, 9. April 2002 01:59 schrieb Greg KH:
> On Mon, Apr 08, 2002 at 09:06:33PM +0200, Felix Seeger wrote:
> > Hi
> >
> > I have tried to install a usb printer but I have no /dev/usb.
> >
> > Usb drivers / usb printer installed (in kernel / module)
> >
> > Do I have to create the folders /dev/usb and the things that are in there
> > ?
>
> If you are not using devfs, yes.
>
> > Why ? ;)
>
> Welcome to Unix :)
>
> thanks,
>
> greg k-h
Ok, it is in development, thats fine ;)
It works now, I've found a mknod command in the newsgroups.
Is there a document for mknod which explaints the numbers at the ond of the
command. The manpage is not really good.
thanks
have fun
Felix
On Tue, Apr 09, 2002 at 09:17:21AM +0200, Felix Seeger wrote:
> Am Dienstag, 9. April 2002 01:59 schrieb Greg KH:
> > On Mon, Apr 08, 2002 at 09:06:33PM +0200, Felix Seeger wrote:
> > > Hi
> > >
> > > I have tried to install a usb printer but I have no /dev/usb.
> > >
> > > Usb drivers / usb printer installed (in kernel / module)
> > >
> > > Do I have to create the folders /dev/usb and the things that are in there
> > > ?
> >
> > If you are not using devfs, yes.
> >
> > > Why ? ;)
> >
> > Welcome to Unix :)
> >
> > thanks,
> >
> > greg k-h
> Ok, it is in development, thats fine ;)
> It works now, I've found a mknod command in the newsgroups.
Heh, no it's not in development. Sorry for giving you such a short
answer, but it was a short question, with a lot of needed information
missing :)
Your distro should have set up all of the /dev nodes properly. If you
are using an old distro version (as I am guessing you are) you will have
to set up the missing /dev entries by hand.
> Is there a document for mknod which explaints the numbers at the ond of the
> command. The manpage is not really good.
All of the numbers are documented in the Documentation/devices.txt
file. The Linux USB Guide at http://www.linux-usb.org/ also has info on
how to create the needed USB device entries if you're interested.
Good luck,
greg k-h
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Am Dienstag, 9. April 2002 18:18 schrieb Greg KH:
> On Tue, Apr 09, 2002 at 09:17:21AM +0200, Felix Seeger wrote:
> > Am Dienstag, 9. April 2002 01:59 schrieb Greg KH:
> > > On Mon, Apr 08, 2002 at 09:06:33PM +0200, Felix Seeger wrote:
> > > > Hi
> > > >
> > > > I have tried to install a usb printer but I have no /dev/usb.
> > > >
> > > > Usb drivers / usb printer installed (in kernel / module)
> > > >
> > > > Do I have to create the folders /dev/usb and the things that are in
> > > > there ?
> > >
> > > If you are not using devfs, yes.
> > >
> > > > Why ? ;)
> > >
> > > Welcome to Unix :)
> > >
> > > thanks,
> > >
> > > greg k-h
> >
> > Ok, it is in development, thats fine ;)
> > It works now, I've found a mknod command in the newsgroups.
>
> Heh, no it's not in development. Sorry for giving you such a short
> answer, but it was a short question, with a lot of needed information
> missing :)
>
> Your distro should have set up all of the /dev nodes properly. If you
> are using an old distro version (as I am guessing you are) you will have
> to set up the missing /dev entries by hand.
I'm using Debian unstable. I think this is new.
But Debian is not the best in "self doing linux", so thats ok ;)
What is mit devfs, it is experimental. But what is it's status.
Will it delete my files, will it toast my printer or will it only crash my
system ?
If it ok, I think I could change to it.
> > Is there a document for mknod which explaints the numbers at the ond of
> > the command. The manpage is not really good.
>
> All of the numbers are documented in the Documentation/devices.txt
> file. The Linux USB Guide at http://www.linux-usb.org/ also has info on
> how to create the needed USB device entries if you're interested.
I will have a look at it.
> Good luck,
>
> greg k-h
thanks
have fun
Felix
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.0.6 (GNU/Linux)
Comment: For info see http://www.gnupg.org
iD8DBQE8s2pnS0DOrvdnsewRAldVAJ9bBt9HhFcjdCtmbqQg2Tucd5nmaQCePczC
jZrrwgOadG598ux8CjcMNxY=
=dE+P
-----END PGP SIGNATURE-----