Hi guys,
I am having a problem with a new dual box, its a dual athlon 1900+,
in a Asus A7M-266-D. When I try using MPS 1.4 the kernel gets upto
printing out CPU1:<T0:... but no further.
When I switch to MPS 1.1 everything works correctly?
After doing some research I found that by adding the noapic and apm=off
kernel parameters everything started to work with 1.4.
Is this normal? Is it better to run with 1.1 or 1.4 and noapic?
If you need more info please ask :)
Thanks
Dave
/-----------------------------------
David Shirley
System's Administrator
Computer Science - Curtin University
(08) 9266 2986
-----------------------------------/
On Tue, 9 Apr 2002, David Shirley wrote:
> Date: Tue, 09 Apr 2002 10:59:07 +0800
> From: David Shirley <[email protected]>
> To: [email protected]
> Subject: SMP problem with 2.4.18
>
> Hi guys,
>
> I am having a problem with a new dual box, its a dual athlon 1900+,
> in a Asus A7M-266-D. When I try using MPS 1.4 the kernel gets upto
> printing out CPU1:<T0:... but no further.
>
> When I switch to MPS 1.1 everything works correctly?
>
> After doing some research I found that by adding the noapic and apm=off
> kernel parameters everything started to work with 1.4.
>
> Is this normal? Is it better to run with 1.1 or 1.4 and noapic?
>
> If you need more info please ask :)
>
> Thanks
> Dave
>
Run it set at 1.1 only.
1.1 will let you use your apic etc
1.4 is stricter. Mfgrs don't abide by 1.4 correctly/completely.
I don't know of any 1.4 capable board that works right in 1.4 mode.
Johnh
>
>
>
> /-----------------------------------
> David Shirley
> System's Administrator
> Computer Science - Curtin University
> (08) 9266 2986
> -----------------------------------/
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
-
-----------------------------------------------------------------
John Heil
South Coast Software
Custom systems software for UNIX and IBM MVS mainframes
1-714-774-6952
[email protected]
http://www.sc-software.com
-----------------------------------------------------------------