Hi, Greg
Sorry for late response.
Thanks, Ohtake(OKISemi)
----- Original Message -----
From: "Greg KH" <[email protected]>
To: "Masayuki Ohtak" <[email protected]>
Cc: <[email protected]>; "Wang Yong Y" <[email protected]>; "Wang Qi" <[email protected]>; "Andrew"
<[email protected]>; <[email protected]>; <[email protected]>; <[email protected]>
Sent: Friday, August 06, 2010 11:24 PM
Subject: Re: [MeeGo-Dev][PATCH] Topcliff: Update PCH_I2C driver to 2.6.35
> On Fri, Aug 06, 2010 at 01:33:24PM +0900, Masayuki Ohtak wrote:
> > I2C driver of Topcliff PCH
> >
> > Topcliff PCH is the platform controller hub that is going to be used in
> > Intel's upcoming general embedded platform. All IO peripherals in
> > Topcliff PCH are actually devices sitting on AMBA bus.
> > Topcliff PCH has I2C I/F. Using this I/F, it is able to access system
> > devices connected to I2C.
> >
> > Signed-off-by: Masayuki Ohtake <[email protected]>
>
>
> Why not run this by the i2c maintainer and developers as well?
I will add i2c maintainer and developers next submission.
>
> You do know about the scripts/get_maintainer.pl program to tell you who
> to copy when sending a patch, right? Please use that.
>
> >
> > ---
> > drivers/i2c/busses/Kconfig | 8 +
> > drivers/i2c/busses/Makefile | 3 +
> > drivers/i2c/busses/i2c-pch.c | 910 ++++++++++++++++++++++++++++++++++++++++++
> > drivers/i2c/busses/i2c-pch.h | 147 +++++++
> > drivers/i2c/i2c-dev.c | 21 +
> > 5 files changed, 1089 insertions(+), 0 deletions(-)
> > create mode 100644 drivers/i2c/busses/i2c-pch.c
> > create mode 100644 drivers/i2c/busses/i2c-pch.h
> >
> > diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
> > index 5f318ce..98e7201 100644
> > --- a/drivers/i2c/busses/Kconfig
> > +++ b/drivers/i2c/busses/Kconfig
> > @@ -7,6 +7,14 @@ menu "I2C Hardware Bus support"
> > comment "PC SMBus host controller drivers"
> > depends on PCI
> >
> > +config PCH_I2C
> > + tristate "PCH I2C"
> > + depends on PCI
> > + help
> > + This driver is for PCH I2C of Topcliff which is an IOH for x86
> > + embedded processor.
> > + This driver can access PCH I2C bus device.
> > +
> > config I2C_ALI1535
> > tristate "ALI 1535"
> > depends on PCI
> > diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
> > index 302c551..3e6b8d6 100644
> > --- a/drivers/i2c/busses/Makefile
> > +++ b/drivers/i2c/busses/Makefile
> > @@ -75,3 +75,6 @@ obj-$(CONFIG_SCx200_I2C) += scx200_i2c.o
> > ifeq ($(CONFIG_I2C_DEBUG_BUS),y)
> > EXTRA_CFLAGS += -DDEBUG
> > endif
> > +
> > +obj-$(CONFIG_PCH_I2C) += pch_i2c.o
> > +pch_i2c-objs := i2c-pch.o
>
> Why not just name your file i2c-pci.c and then you don't need this
> two-step Makefile mess?
>
> > diff --git a/drivers/i2c/busses/i2c-pch.c b/drivers/i2c/busses/i2c-pch.c
> > new file mode 100644
> > index 0000000..7939781
> > --- /dev/null
> > +++ b/drivers/i2c/busses/i2c-pch.c
> > @@ -0,0 +1,910 @@
> > +/*
> > + * Copyright (C) 2010 OKI SEMICONDUCTOR Co., LTD.
> > + *
> > + * This program is free software; you can redistribute it and/or modify
> > + * it under the terms of the GNU General Public License as published by
> > + * the Free Software Foundation; version 2 of the License.
> > + *
> > + * This program is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > + * GNU General Public License for more details.
> > + *
> > + * You should have received a copy of the GNU General Public License
> > + * along with this program; if not, write to the Free Software
> > + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
> > + */
> > +
> > +#include <linux/module.h>
> > +#include <linux/kernel.h>
> > +#include <linux/delay.h>
> > +#include <linux/init.h>
> > +#include <linux/errno.h>
> > +#include <linux/i2c.h>
> > +#include <linux/fs.h>
> > +#include <linux/io.h>
> > +#include <linux/types.h>
> > +#include <linux/interrupt.h>
> > +#include <linux/jiffies.h>
> > +#include <linux/pci.h>
> > +#include <linux/mutex.h>
> > +#include <linux/ktime.h>
> > +
> > +#include "i2c-pch.h"
>
> Why do you need a .h file for this driver?
I will delete.
>
> <snip>
>
> > diff --git a/drivers/i2c/i2c-dev.c b/drivers/i2c/i2c-dev.c
> > index f4110aa..53e13de 100644
> > --- a/drivers/i2c/i2c-dev.c
> > +++ b/drivers/i2c/i2c-dev.c
> > @@ -36,6 +36,7 @@
> > #include <linux/i2c-dev.h>
> > #include <linux/jiffies.h>
> > #include <linux/uaccess.h>
> > +#include "busses/i2c-pch.h"
>
> Note how no other i2c driver needs to be included here...
I will delete.
>
> > static struct i2c_driver i2cdev_driver;
> >
> > @@ -372,6 +373,12 @@ static long i2cdev_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
> > struct i2c_client *client = file->private_data;
> > unsigned long funcs;
> >
> > + unsigned long pch_mode;
> > + int ret;
> > +
> > + struct i2c_msg msg;
> > + unsigned char msgbuf[1];
> > +
> > dev_dbg(&client->adapter->dev, "ioctl, cmd=0x%02x, arg=0x%02lx\n",
> > cmd, arg);
> >
> > @@ -427,6 +434,20 @@ static long i2cdev_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
> > */
> > client->adapter->timeout = msecs_to_jiffies(arg * 10);
> > break;
> > + case I2C_MODE_SEL:
> > + pch_mode = arg;
> > +
> > + if (pch_mode <= 4) {
> > + msgbuf[0] = pch_mode;
> > + msg.buf = msgbuf;
> > + msg.len = 1;
> > + msg.flags = 0;
> > + ret = i2c_transfer(client->adapter, &msg, 1);
> > + } else {
> > + printk(KERN_ERR "I2C mode sel:Invalid mode\n");
> > + ret = -EINVAL;
> > + }
> > + return ret;
>
> I really doubt you are allowed to add a new ioctl to the core i2c layer.
> You will have to run this by the i2c maintainer to get it accepted.
>
I will revert i2c core module.
I will submit modified patch soon.
Thanks, Ohtake(OKISemi)