Sorry, I forget to add "--CCs"
It seems spi_topcliff_pch of linux-2.6.37-rc6 degraded by previous patch.
In fact, data transfer fails on evaluation board testing.
I found like the following register miss-setting line.
Using this patch, I have confirmed data transfer can work well.
Signed-off-by: Tomoya MORINAGA <[email protected]>
---
drivers/spi/spi_topcliff_pch.c | 8 ++++----
1 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/spi/spi_topcliff_pch.c b/drivers/spi/spi_topcliff_pch.c
index 58e187f..56b7588 100644
--- a/drivers/spi/spi_topcliff_pch.c
+++ b/drivers/spi/spi_topcliff_pch.c
@@ -267,7 +267,7 @@ static void pch_spi_handler_sub(struct pch_spi_data *data, u32 reg_spsr_val,
if (reg_spsr_val & SPSR_FI_BIT) {
/* disable FI & RFI interrupts */
pch_spi_setclr_reg(data->master, PCH_SPCR, 0,
- SPCR_FIE_BIT | SPCR_TFIE_BIT);
+ SPCR_FIE_BIT | SPCR_RFIE_BIT);
/* transfer is completed;inform pch_spi_process_messages */
data->transfer_complete = true;
@@ -679,11 +679,11 @@ static void pch_spi_set_ir(struct pch_spi_data *data)
if ((data->bpw_len) > PCH_MAX_FIFO_DEPTH) {
/* set receive threhold to PCH_RX_THOLD */
pch_spi_setclr_reg(data->master, PCH_SPCR,
- PCH_RX_THOLD << SPCR_TFIC_FIELD,
- ~MASK_TFIC_SPCR_BITS);
+ PCH_RX_THOLD << SPCR_RFIC_FIELD,
+ ~MASK_RFIC_SPCR_BITS);
/* enable FI and RFI interrupts */
pch_spi_setclr_reg(data->master, PCH_SPCR,
- SPCR_RFIE_BIT | SPCR_TFIE_BIT, 0);
+ SPCR_RFIE_BIT | SPCR_FIE_BIT, 0);
} else {
/* set receive threhold to maximum */
pch_spi_setclr_reg(data->master, PCH_SPCR,
--
1.6.0.6