Hi,
The Crystal CS89x0 ethernet chip is also used in quite some embedded
systems that don't have an ISA bus at all, so the CONFIG_ISA option in
drivers/net/Config.in is inapropriate. Here is a patch against
2.4.0-test12 to fix that. Please consider applying.
Erik
Index: drivers/net/Config.in
===================================================================
RCS file: /home/erik/cvsroot/elinux/drivers/net/Config.in,v
retrieving revision 1.1.1.39
diff -u -r1.1.1.39 Config.in
--- drivers/net/Config.in 2000/12/07 14:16:21 1.1.1.39
+++ drivers/net/Config.in 2000/12/13 14:22:02
@@ -134,7 +138,7 @@
fi
tristate ' Apricot Xen-II on board Ethernet' CONFIG_APRICOT
- dep_tristate ' CS89x0 support' CONFIG_CS89x0 $CONFIG_ISA
+ tristate ' CS89x0 support' CONFIG_CS89x0
dep_tristate ' DECchip Tulip (dc21x4x) PCI support' CONFIG_TULIP $CONFIG_PCI
if [ "$CONFIG_PCI" = "y" -o "$CONFIG_EISA" = "y" ]; then
tristate ' Generic DECchip & DIGITAL EtherWORKS PCI/EISA' CONFIG_DE4X5
--
J.A.K. (Erik) Mouw, Information and Communication Theory Group, Department
of Electrical Engineering, Faculty of Information Technology and Systems,
Delft University of Technology, PO BOX 5031, 2600 GA Delft, The Netherlands
Phone: +31-15-2783635 Fax: +31-15-2781843 Email: [email protected]
WWW: http://www-ict.its.tudelft.nl/~erik/