Just tested 3.4.0-02580-g72c04af on about 10 machines. While most of
them work (including 3 different sparc64 machines with real scsi disks),
Sun Netra X1 with pata_ali and IDE disk consistently fails to boot. sda
is recognized but no partitions. 3.3.0 works fine, as did something
around 3.4-rc7 (plain 3.4 not tested yet). No other IDE machines tested
yet since I have none with remote console at the moment.
# fdisk -l /dev/sda
Disk /dev/sda (Sun disk label): 255 heads, 63 sectors, 14596 cylinders
Units = sectors of 1 * 512 bytes
Device Flag Start End Blocks Id System
/dev/sda1 0 192780 96390 1 Boot
/dev/sda2 192780 13864095 6835657+ 83 Linux native
/dev/sda3 0 234484740 117242370 5 Whole disk
/dev/sda4 13864095 19856340 2996122+ 82 Linux swap
/dev/sda5 19856340 234484740 107314200 83 Linux native
First 512 bytes of the disk:
# od -t x1 table.img
0000000 47 4e 55 20 50 61 72 74 65 64 20 43 75 73 74 6f
0000020 6d 20 63 79 6c 20 31 34 35 39 36 20 61 6c 74 20
0000040 30 20 68 64 20 32 35 35 20 73 65 63 20 36 33 00
0000060 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
*
0000200 00 00 00 01 00 00 00 00 00 00 00 00 00 08 00 01
0000220 00 00 00 83 00 00 00 05 00 00 00 82 00 00 00 83
0000240 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0000260 00 00 00 00 00 00 00 00 00 00 00 00 60 0d de ee
0000300 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
*
0000640 00 00 00 00 15 18 39 04 00 00 00 00 00 00 00 01
0000660 39 04 00 00 00 ff 00 3f 00 00 00 00 00 00 00 00
0000700 00 02 f1 0c 00 00 00 0c 00 d0 9b 93 00 00 00 00
0000720 0d f9 f4 04 00 00 03 5f 00 5b 6f 35 00 00 04 d4
0000740 0c ca f8 30 00 00 00 00 00 00 00 00 00 00 00 00
0000760 00 00 00 00 00 00 00 00 00 00 00 00 da be 54 95
0001000
[ 0.000000] PROMLIB: Sun IEEE Boot Prom 'OBP 4.0.9 2001/05/17 21:52'
[ 0.000000] PROMLIB: Root node compatible: sun4u
[ 0.000000] Linux version 3.4.0-02580-g72c04af (mroos@deegu) (gcc version 4.6.3 (Debian 4.6.3-5) ) #24 Tue May 22 10:30:31 EEST 2012
[ 0.000000] debug: ignoring loglevel setting.
[ 0.000000] bootconsole [earlyprom0] enabled
[ 0.000000] ARCH: SUN4U
[ 0.000000] Ethernet address: 00:03:ba:0c:06:cd
[ 0.000000] Kernel: Using 2 locked TLB entries for main kernel image.
[ 0.000000] Remapping the kernel... done.
[ 0.000000] OF stdout device is: /pci@1f,0/isa@7/serial@0,3f8
[ 0.000000] PROM: Built device tree with 46439 bytes of memory.
[ 0.000000] Top of RAM: 0x6fec8000, Total RAM: 0x3fe36000
[ 0.000000] Memory hole size: 768MB
[ 0.000000] [0000010000000000-fffff8006f800000] page_structs=131072 node=0 entry=0/8192
[ 0.000000] [0000010000000000-fffff8006f400000] page_structs=131072 node=0 entry=1/8192
[ 0.000000] [0000010000800000-fffff8006f000000] page_structs=131072 node=0 entry=2/8192
[ 0.000000] [0000010000800000-fffff8006e800000] page_structs=131072 node=0 entry=3/8192
[ 0.000000] Zone PFN ranges:
[ 0.000000] Normal 0x00000000 -> 0x00037f64
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00008000
[ 0.000000] 0: 0x00010000 -> 0x00018000
[ 0.000000] 0: 0x00020000 -> 0x00028000
[ 0.000000] 0: 0x00030000 -> 0x000377ff
[ 0.000000] 0: 0x00037800 -> 0x00037f00
[ 0.000000] 0: 0x00037f40 -> 0x00037f58
[ 0.000000] 0: 0x00037f60 -> 0x00037f64
[ 0.000000] On node 0 totalpages: 130843
[ 0.000000] Normal zone: 1791 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 129052 pages, LIFO batch:15
[ 0.000000] Booting Linux...
[ 0.000000] CPU CAPS: [flush,stbar,swap,muldiv,v9,mul32,div32,v8plus]
[ 0.000000] CPU CAPS: [vis]
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129052
[ 0.000000] Kernel command line: root=/dev/sda2 ro debug ignore_loglevel
[ 0.000000] PID hash table entries: 4096 (order: 2, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 1048576 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 524288 bytes)
[ 0.000000] Memory: 1023512k available (3096k kernel code, 1424k data, 144k init) [fffff80000000000,000000006fec8000]
[ 0.000000] SLUB: Genslabs=16, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:255
[ 0.000000] clocksource: mult[b400012e] shift[24]
[ 0.000000] clockevent: mult[16c16bf] shift[32]
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled, bootconsole disabled
[ 0.000000] PROMLIB: Sun IEEE Boot Prom 'OBP 4.0.9 2001/05/17 21:52'
[ 0.000000] PROMLIB: Root node compatible: sun4u
[ 0.000000] Linux version 3.4.0-02580-g72c04af (mroos@deegu) (gcc version 4.6.3 (Debian 4.6.3-5) ) #24 Tue May 22 10:30:31 EEST 2012
[ 0.000000] debug: ignoring loglevel setting.
[ 0.000000] bootconsole [earlyprom0] enabled
[ 0.000000] ARCH: SUN4U
[ 0.000000] Ethernet address: 00:03:ba:0c:06:cd
[ 0.000000] Kernel: Using 2 locked TLB entries for main kernel image.
[ 0.000000] Remapping the kernel... done.
[ 0.000000] OF stdout device is: /pci@1f,0/isa@7/serial@0,3f8
[ 0.000000] PROM: Built device tree with 46439 bytes of memory.
[ 0.000000] Top of RAM: 0x6fec8000, Total RAM: 0x3fe36000
[ 0.000000] Memory hole size: 768MB
[ 0.000000] [0000010000000000-fffff8006f800000] page_structs=131072 node=0 entry=0/8192
[ 0.000000] [0000010000000000-fffff8006f400000] page_structs=131072 node=0 entry=1/8192
[ 0.000000] [0000010000800000-fffff8006f000000] page_structs=131072 node=0 entry=2/8192
[ 0.000000] [0000010000800000-fffff8006e800000] page_structs=131072 node=0 entry=3/8192
[ 0.000000] Zone PFN ranges:
[ 0.000000] Normal 0x00000000 -> 0x00037f64
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00008000
[ 0.000000] 0: 0x00010000 -> 0x00018000
[ 0.000000] 0: 0x00020000 -> 0x00028000
[ 0.000000] 0: 0x00030000 -> 0x000377ff
[ 0.000000] 0: 0x00037800 -> 0x00037f00
[ 0.000000] 0: 0x00037f40 -> 0x00037f58
[ 0.000000] 0: 0x00037f60 -> 0x00037f64
[ 0.000000] On node 0 totalpages: 130843
[ 0.000000] Normal zone: 1791 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 129052 pages, LIFO batch:15
[ 0.000000] Booting Linux...
[ 0.000000] CPU CAPS: [flush,stbar,swap,muldiv,v9,mul32,div32,v8plus]
[ 0.000000] CPU CAPS: [vis]
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129052
[ 0.000000] Kernel command line: root=/dev/sda2 ro debug ignore_loglevel
[ 0.000000] PID hash table entries: 4096 (order: 2, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 1048576 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 524288 bytes)
[ 0.000000] Memory: 1023512k available (3096k kernel code, 1424k data, 144k init) [fffff80000000000,000000006fec8000]
[ 0.000000] SLUB: Genslabs=16, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:255
[ 0.000000] clocksource: mult[b400012e] shift[24]
[ 0.000000] clockevent: mult[16c16bf] shift[32]
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled, bootconsole disabled
[ 57.523605] Calibrating delay using timer specific routine.. 11.12 BogoMIPS (lpj=55632)
[ 57.523642] pid_max: default: 32768 minimum: 301
[ 57.523916] Security Framework initialized
[ 57.524034] Mount-cache hash table entries: 512
[ 57.527336] NET: Registered protocol family 16
[ 57.528046] kworker/u:0 used greatest stack depth: 13096 bytes left
[ 57.533728] kworker/u:0 used greatest stack depth: 11704 bytes left
[ 57.547320] /pci@1f,0: PCI IO[1fe02000000] MEM[1ff00000000]
[ 57.547391] /pci@1f,0: SABRE PCI Bus Module ver[0:0]
[ 57.547413] PCI: Scanning PBM /pci@1f,0
[ 57.548190] sabre f0069698: PCI host bridge to bus 0000:00
[ 57.548233] pci_bus 0000:00: root bus resource [io 0x1fe02000000-0x1fe02ffffff] (bus address [0x0000-0xffffff])
[ 57.548277] pci_bus 0000:00: root bus resource [mem 0x1ff00000000-0x1ffffffffff] (bus address [0x00000000-0xffffffff])
[ 57.548496] pci 0000:00:03.0: quirk: [io 0x1fe02002000-0x1fe0200203f] claimed by ali7101 ACPI
[ 57.548536] pci 0000:00:03.0: quirk: [io 0x1fe02004000-0x1fe0200401f] claimed by ali7101 SMB
[ 57.548656] pci 0000:00:0c.0: PME# supported from D3hot D3cold
[ 57.548764] pci 0000:00:05.0: PME# supported from D3hot D3cold
[ 57.566891] bio: create slab <bio-0> at 0
[ 57.568309] vgaarb: loaded
[ 57.569574] SCSI subsystem initialized
[ 57.570552] libata version 3.00 loaded.
[ 57.572558] /pci@1f,0/isa@7/rtc@0,70: RTC regs at 0x1fe02000070
[ 57.575138] Switching to clocksource hbtick
[ 57.597728] NET: Registered protocol family 2
[ 57.598134] IP route cache hash table entries: 8192 (order: 3, 65536 bytes)
[ 57.599155] TCP established hash table entries: 32768 (order: 6, 524288 bytes)
[ 57.601800] TCP bind hash table entries: 32768 (order: 5, 262144 bytes)
[ 57.603226] TCP: Hash tables configured (established 32768 bind 32768)
[ 57.603297] TCP: reno registered
[ 57.603359] UDP hash table entries: 512 (order: 1, 16384 bytes)
[ 57.603494] UDP-Lite hash table entries: 512 (order: 1, 16384 bytes)
[ 57.604090] NET: Registered protocol family 1
[ 57.604203] pci 0000:00:07.0: Activating ISA DMA hang workarounds
[ 57.604291] PCI: Enabling device: (0000:00:0a.0), cmd 2
[ 57.655290] PCI: CLS 0 bytes, default 64
[ 57.655597] power: Control reg at 1fe02002000
[ 57.681937] VFS: Disk quotas dquot_6.5.2
[ 57.682499] Dquot-cache hash table entries: 1024 (order 0, 8192 bytes)
[ 57.687522] msgmni has been set to 1999
[ 57.689535] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 57.689609] io scheduler noop registered
[ 57.690480] io scheduler cfq registered (default)
[ 57.691362] f0076704: ttyS0 at MMIO 0x1fe020003f8 (irq = 7) is a 16550A
[ 57.691415] Console: ttyS0 (SU)
[ 64.293415] console [ttyS0] enabled
[ 64.339754] f00783f0: ttyS1 at MMIO 0x1fe020002e8 (irq = 7) is a 16550A
[ 64.428151] PCI: Enabling device: (0000:00:0d.0), cmd 5
[ 64.499923] scsi0 : pata_ali
[ 64.538613] scsi1 : pata_ali
[ 64.577240] ata1: PATA max UDMA/66 cmd 0x1fe02010200 ctl 0x1fe02010218 bmdma 0x1fe02010220 irq 12
[ 64.693909] ata2: PATA max UDMA/66 cmd 0x1fe02010210 ctl 0x1fe02010208 bmdma 0x1fe02010228 irq 12
[ 64.811471] Linux Tulip driver version 1.1.15-NAPI (Feb 27, 2007)
[ 64.894381] tulip0: Old style EEPROM with no media selection information
[ 64.982689] tulip0: MII transceiver #1 config 1000 status 782d advertising 01e1
[ 65.083942] net eth0: Davicom DM9102/DM9102A rev 49 at MMIO 0x1ff00000000, EEPROM not present, 00:03:ba:0c:06:cd, IRQ 9
[ 65.228606] tulip1: Old style EEPROM with no media selection information
[ 65.316945] tulip1: MII transceiver #1 config 1000 status 7809 advertising 01e1
[ 65.417514] ata1.00: ATA-7: SAMSUNG SP1213N, TL100-30, max UDMA/100
[ 65.499892] ata1.00: 234493056 sectors, multi 16: LBA48
[ 65.570528] net eth1: Davicom DM9102/DM9102A rev 49 at MMIO 0x1ff00002000, EEPROM not present, 00:03:ba:0c:06:ce, IRQ 10
[ 65.714223] mousedev: PS/2 mouse device common for all mice
[ 65.788744] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[ 65.872323] rtc0: no alarms, 114 bytes nvram
[ 65.928820] ata1.00: configured for UDMA/66
[ 65.984403] scsi 0:0:0:0: Direct-Access ATA SAMSUNG SP1213N TL10 PQ: 0 ANSI: 5
[ 66.093663] TCP: cubic registered
[ 66.137161] NET: Registered protocol family 17
[ 66.195615] Key type dns_resolver registered
[ 66.253496] sd 0:0:0:0: [sda] 234493056 512-byte logical blocks: (120 GB/111 GiB)
[ 66.353671] registered taskstats version 1
[ 66.408337] sd 0:0:0:0: [sda] Write Protect is off
[ 66.471315] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 66.548771] console [netcon0] enabled
[ 66.596820] netconsole: network logging started
[ 66.656394] rtc_cmos rtc_cmos: setting system clock to 2012-05-22 07:58:51 UTC (1337673531)
[ 66.766763] VFS: Cannot open root device "sda2" or unknown-block(0,0): error -6
[ 66.862840] Please append a correct "root=" boot option; here are the available partitions:
[ 66.972655] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
[ 67.081334] Call Trace:
[ 67.113435] [0000000000876c94] mount_block_root+0x140/0x1f0
[ 67.187830] [0000000000876f10] prepare_namespace+0x168/0x198
[ 67.263366] [000000000087695c] kernel_init+0xd8/0xec
[ 67.329768] [000000000042b0d0] kernel_thread+0x30/0x60
[ 67.398447] [00000000006f55a8] rest_init+0x10/0x68
[ 67.462551] Press Stop-A (L1-A) to return to the boot prom
#
# Automatically generated file; DO NOT EDIT.
# Linux/sparc64 3.4.0 Kernel Configuration
#
CONFIG_64BIT=y
CONFIG_SPARC=y
# CONFIG_SPARC32 is not set
CONFIG_SPARC64=y
CONFIG_ARCH_DEFCONFIG="arch/sparc/configs/sparc64_defconfig"
CONFIG_BITS=64
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_IOMMU_HELPER=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_AUDIT_ARCH=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_MMU=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_HAVE_IRQ_WORK=y
#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_DEFAULT_HOSTNAME="deegu"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_FHANDLE is not set
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
# CONFIG_AUDIT is not set
CONFIG_HAVE_GENERIC_HARDIRQS=y
#
# IRQ subsystem
#
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_IRQ_PREFLOW_FASTEOI=y
#
# RCU Subsystem
#
CONFIG_TINY_RCU=y
# CONFIG_PREEMPT_RCU is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=16
# CONFIG_CGROUPS is not set
# CONFIG_CHECKPOINT_RESTORE is not set
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
# CONFIG_NET_NS is not set
# CONFIG_SCHED_AUTOGROUP is not set
# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_RELAY is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
# CONFIG_EXPERT is not set
CONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_PERF_USE_VMALLOC=y
#
# Kernel Performance Events And Counters
#
# CONFIG_PERF_EVENTS is not set
# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_PROFILING is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_JUMP_LABEL=y
CONFIG_HAVE_SYSCALL_WRAPPERS=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_NMI_WATCHDOG=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y
#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
CONFIG_BLK_DEV_BSG=y
CONFIG_BLK_DEV_BSGLIB=y
# CONFIG_BLK_DEV_INTEGRITY is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
CONFIG_ACORN_PARTITION=y
CONFIG_ACORN_PARTITION_CUMANA=y
CONFIG_ACORN_PARTITION_EESOX=y
CONFIG_ACORN_PARTITION_ICS=y
CONFIG_ACORN_PARTITION_ADFS=y
CONFIG_ACORN_PARTITION_POWERTEC=y
CONFIG_ACORN_PARTITION_RISCIX=y
CONFIG_OSF_PARTITION=y
CONFIG_AMIGA_PARTITION=y
CONFIG_ATARI_PARTITION=y
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
CONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not set
CONFIG_SGI_PARTITION=y
CONFIG_ULTRIX_PARTITION=y
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
CONFIG_SYSV68_PARTITION=y
CONFIG_BLOCK_COMPAT=y
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_DEADLINE is not set
CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
# CONFIG_INLINE_SPIN_TRYLOCK is not set
# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK is not set
# CONFIG_INLINE_SPIN_LOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_READ_TRYLOCK is not set
# CONFIG_INLINE_READ_LOCK is not set
# CONFIG_INLINE_READ_LOCK_BH is not set
# CONFIG_INLINE_READ_LOCK_IRQ is not set
# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
CONFIG_INLINE_READ_UNLOCK=y
# CONFIG_INLINE_READ_UNLOCK_BH is not set
CONFIG_INLINE_READ_UNLOCK_IRQ=y
# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_WRITE_TRYLOCK is not set
# CONFIG_INLINE_WRITE_LOCK is not set
# CONFIG_INLINE_WRITE_LOCK_BH is not set
# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
CONFIG_INLINE_WRITE_UNLOCK=y
# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
# Processor type and features
#
# CONFIG_SMP is not set
CONFIG_HZ_100=y
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=100
CONFIG_SCHED_HRTICK=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_EARLYFB=y
CONFIG_SPARC64_PAGE_SIZE_8KB=y
# CONFIG_SPARC64_PAGE_SIZE_64KB is not set
# CONFIG_SECCOMP is not set
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
# CONFIG_US3_MC is not set
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_NO_BOOTMEM=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_COMPACTION is not set
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=0
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_NEED_PER_CPU_KM=y
# CONFIG_CLEANCACHE is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
# CONFIG_CMDLINE_BOOL is not set
#
# Bus options (PCI etc.)
#
CONFIG_SBUS=y
CONFIG_SBUSCHAR=y
# CONFIG_SUN_LDOMS is not set
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_SYSCALL=y
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
# CONFIG_PCI_PRI is not set
# CONFIG_PCI_PASID is not set
# CONFIG_PCCARD is not set
CONFIG_SUN_OPENPROMFS=m
CONFIG_SPARC64_PCI=y
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=m
CONFIG_COMPAT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_KEYS_COMPAT=y
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_UNIX_DIAG=m
CONFIG_XFRM=y
CONFIG_XFRM_ALGO=m
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
CONFIG_XFRM_IPCOMP=m
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_ROUTE_CLASSID=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE_DEMUX=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
CONFIG_INET_LRO=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
CONFIG_INET_UDP_DIAG=m
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
CONFIG_IPV6_OPTIMISTIC_DAD=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_MIP6=m
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
CONFIG_IPV6_SIT=m
CONFIG_IPV6_SIT_6RD=y
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_SUBTREES=y
CONFIG_IPV6_MROUTE=y
CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y
CONFIG_IPV6_PIMSM_V2=y
# CONFIG_NETLABEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=y
#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_ACCT=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NF_CONNTRACK=m
CONFIG_NF_CONNTRACK_MARK=y
# CONFIG_NF_CONNTRACK_ZONES is not set
CONFIG_NF_CONNTRACK_PROCFS=y
CONFIG_NF_CONNTRACK_EVENTS=y
CONFIG_NF_CONNTRACK_TIMEOUT=y
# CONFIG_NF_CONNTRACK_TIMESTAMP is not set
CONFIG_NF_CT_PROTO_DCCP=m
CONFIG_NF_CT_PROTO_GRE=m
CONFIG_NF_CT_PROTO_SCTP=m
CONFIG_NF_CT_PROTO_UDPLITE=m
CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_H323=m
CONFIG_NF_CONNTRACK_IRC=m
CONFIG_NF_CONNTRACK_BROADCAST=m
CONFIG_NF_CONNTRACK_NETBIOS_NS=m
CONFIG_NF_CONNTRACK_SNMP=m
CONFIG_NF_CONNTRACK_PPTP=m
CONFIG_NF_CONNTRACK_SANE=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CT_NETLINK=m
CONFIG_NF_CT_NETLINK_TIMEOUT=m
CONFIG_NETFILTER_TPROXY=m
CONFIG_NETFILTER_XTABLES=m
#
# Xtables combined modules
#
CONFIG_NETFILTER_XT_MARK=m
CONFIG_NETFILTER_XT_CONNMARK=m
CONFIG_NETFILTER_XT_SET=m
#
# Xtables targets
#
CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_CT=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_HL=m
CONFIG_NETFILTER_XT_TARGET_HMARK=m
CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
CONFIG_NETFILTER_XT_TARGET_LOG=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
CONFIG_NETFILTER_XT_TARGET_RATEEST=m
CONFIG_NETFILTER_XT_TARGET_TEE=m
CONFIG_NETFILTER_XT_TARGET_TPROXY=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
#
# Xtables matches
#
CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_CPU=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ECN=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_HL=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_NFACCT=m
CONFIG_NETFILTER_XT_MATCH_OSF=m
CONFIG_NETFILTER_XT_MATCH_OWNER=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_RECENT=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_SOCKET=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
CONFIG_IP_SET=m
CONFIG_IP_SET_MAX=256
CONFIG_IP_SET_BITMAP_IP=m
CONFIG_IP_SET_BITMAP_IPMAC=m
CONFIG_IP_SET_BITMAP_PORT=m
CONFIG_IP_SET_HASH_IP=m
CONFIG_IP_SET_HASH_IPPORT=m
CONFIG_IP_SET_HASH_IPPORTIP=m
CONFIG_IP_SET_HASH_IPPORTNET=m
CONFIG_IP_SET_HASH_NET=m
CONFIG_IP_SET_HASH_NETPORT=m
CONFIG_IP_SET_HASH_NETIFACE=m
CONFIG_IP_SET_LIST_SET=m
# CONFIG_IP_VS is not set
#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=m
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_RPFILTER=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_NF_NAT=m
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PROTO_DCCP=m
CONFIG_NF_NAT_PROTO_GRE=m
CONFIG_NF_NAT_PROTO_UDPLITE=m
CONFIG_NF_NAT_PROTO_SCTP=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_TFTP=m
CONFIG_NF_NAT_AMANDA=m
CONFIG_NF_NAT_PPTP=m
CONFIG_NF_NAT_H323=m
CONFIG_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_RAW=m
# CONFIG_IP_NF_SECURITY is not set
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
#
# IPv6: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV6=m
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RPFILTER=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_RAW=m
# CONFIG_IP6_NF_SECURITY is not set
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_T_NAT=m
CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_IP6=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
CONFIG_BRIDGE_EBT_STP=m
CONFIG_BRIDGE_EBT_VLAN=m
CONFIG_BRIDGE_EBT_ARPREPLY=m
CONFIG_BRIDGE_EBT_DNAT=m
CONFIG_BRIDGE_EBT_MARK_T=m
CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
CONFIG_BRIDGE_EBT_ULOG=m
CONFIG_BRIDGE_EBT_NFLOG=m
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
CONFIG_L2TP=m
CONFIG_L2TP_DEBUGFS=m
CONFIG_L2TP_V3=y
CONFIG_L2TP_IP=m
CONFIG_L2TP_ETH=m
CONFIG_STP=m
CONFIG_GARP=m
CONFIG_BRIDGE=m
CONFIG_BRIDGE_IGMP_SNOOPING=y
# CONFIG_NET_DSA is not set
CONFIG_VLAN_8021Q=m
CONFIG_VLAN_8021Q_GVRP=y
# CONFIG_DECNET is not set
CONFIG_LLC=m
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
# CONFIG_IEEE802154 is not set
CONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_MULTIQ=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFB=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_DRR=m
CONFIG_NET_SCH_MQPRIO=m
CONFIG_NET_SCH_CHOKE=m
CONFIG_NET_SCH_QFQ=m
CONFIG_NET_SCH_CODEL=m
CONFIG_NET_SCH_FQ_CODEL=m
CONFIG_NET_SCH_INGRESS=m
CONFIG_NET_SCH_PLUG=m
#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_CLS_FLOW=m
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=m
CONFIG_NET_EMATCH_NBYTE=m
CONFIG_NET_EMATCH_U32=m
CONFIG_NET_EMATCH_META=m
CONFIG_NET_EMATCH_TEXT=m
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=m
CONFIG_NET_ACT_GACT=m
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=m
CONFIG_NET_ACT_IPT=m
CONFIG_NET_ACT_NAT=m
CONFIG_NET_ACT_PEDIT=m
CONFIG_NET_ACT_SIMP=m
CONFIG_NET_ACT_SKBEDIT=m
CONFIG_NET_ACT_CSUM=m
CONFIG_NET_CLS_IND=y
CONFIG_NET_SCH_FIFO=y
# CONFIG_DCB is not set
CONFIG_DNS_RESOLVER=y
# CONFIG_BATMAN_ADV is not set
# CONFIG_OPENVSWITCH is not set
CONFIG_BQL=y
CONFIG_BPF_JIT=y
#
# Network testing
#
CONFIG_NET_PKTGEN=m
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
CONFIG_FIB_RULES=y
# CONFIG_WIRELESS is not set
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_CAIF is not set
# CONFIG_CEPH_LIB is not set
# CONFIG_NFC is not set
CONFIG_HAVE_BPF_JIT=y
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_DEVTMPFS is not set
# CONFIG_STANDALONE is not set
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_GENERIC_CPU_DEVICES is not set
# CONFIG_DMA_SHARED_BUFFER is not set
CONFIG_CONNECTOR=m
# CONFIG_MTD is not set
CONFIG_OF=y
#
# Device Tree and Open Firmware support
#
# CONFIG_OF_SELFTEST is not set
CONFIG_OF_PROMTREE=y
CONFIG_OF_DEVICE=y
CONFIG_OF_NET=y
CONFIG_OF_PCI=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_DRBD=m
CONFIG_DRBD_FAULT_INJECTION=y
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_NVME is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_CDROM_PKTCDVD is not set
CONFIG_ATA_OVER_ETH=m
# CONFIG_BLK_DEV_HD is not set
# CONFIG_BLK_DEV_RBD is not set
#
# Misc devices
#
# CONFIG_SENSORS_LIS3LV02D is not set
# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
# CONFIG_INTEL_MID_PTI is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_APDS9802ALS is not set
# CONFIG_ISL29003 is not set
# CONFIG_ISL29020 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_SENSORS_BH1780 is not set
# CONFIG_SENSORS_BH1770 is not set
# CONFIG_SENSORS_APDS990X is not set
# CONFIG_HMC6352 is not set
# CONFIG_DS1682 is not set
# CONFIG_BMP085 is not set
# CONFIG_PCH_PHUB is not set
# CONFIG_USB_SWITCH_FSA9480 is not set
# CONFIG_C2PORT is not set
#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_CB710_CORE is not set
#
# Texas Instruments shared transport line discipline
#
# CONFIG_SENSORS_LIS3_I2C is not set
#
# Altera FPGA firmware download module
#
# CONFIG_ALTERA_STAPL is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
# CONFIG_SCSI_PROC_FS is not set
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_OSST=m
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
CONFIG_CHR_DEV_SCH=m
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
CONFIG_SCSI_ISCSI_ATTRS=m
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
# CONFIG_ISCSI_BOOT_SYSFS is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_SCSI_CXGB4_ISCSI is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_SCSI_BNX2X_FCOE is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_MVUMI is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_UFSHCD is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_LIBFC is not set
# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLOGICPTI is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SUNESP is not set
# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_SATA_PMP=y
#
# Controllers with non-SFF native interface
#
# CONFIG_SATA_AHCI is not set
# CONFIG_SATA_AHCI_PLATFORM is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_SATA_ACARD_AHCI is not set
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y
#
# SFF controllers with custom DMA interface
#
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_SX4 is not set
CONFIG_ATA_BMDMA=y
#
# SATA SFF controllers with BMDMA
#
# CONFIG_ATA_PIIX is not set
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_SVW is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
#
# PATA SFF controllers with BMDMA
#
CONFIG_PATA_ALI=y
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CS5536 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SCH is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
#
# PIO-only SFF controllers
#
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_RZ1000 is not set
#
# Generic fallback / legacy drivers
#
# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_LEGACY is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_BUFIO=m
CONFIG_DM_PERSISTENT_DATA=m
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_THIN_PROVISIONING=m
# CONFIG_DM_DEBUG_BLOCK_STACK_TRACING is not set
# CONFIG_DM_DEBUG_SPACE_MAPS is not set
CONFIG_DM_MIRROR=m
CONFIG_DM_RAID=m
# CONFIG_DM_LOG_USERSPACE is not set
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
CONFIG_DM_MULTIPATH_QL=m
CONFIG_DM_MULTIPATH_ST=m
CONFIG_DM_DELAY=m
CONFIG_DM_UEVENT=y
# CONFIG_DM_FLAKEY is not set
# CONFIG_DM_VERITY is not set
# CONFIG_TARGET_CORE is not set
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
# CONFIG_FIREWIRE_NOSY is not set
# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
CONFIG_NET_CORE=y
# CONFIG_BONDING is not set
# CONFIG_DUMMY is not set
# CONFIG_EQUALIZER is not set
# CONFIG_NET_FC is not set
CONFIG_MII=m
CONFIG_IFB=m
# CONFIG_NET_TEAM is not set
CONFIG_MACVLAN=m
CONFIG_MACVTAP=m
CONFIG_NETCONSOLE=y
CONFIG_NETCONSOLE_DYNAMIC=y
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y
CONFIG_TUN=m
CONFIG_VETH=m
# CONFIG_ARCNET is not set
#
# CAIF transport drivers
#
CONFIG_ETHERNET=y
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_VENDOR_ADAPTEC is not set
# CONFIG_GRETH is not set
# CONFIG_NET_VENDOR_ALTEON is not set
# CONFIG_NET_VENDOR_AMD is not set
# CONFIG_NET_VENDOR_ATHEROS is not set
# CONFIG_NET_VENDOR_BROADCOM is not set
# CONFIG_NET_VENDOR_BROCADE is not set
# CONFIG_NET_CALXEDA_XGMAC is not set
# CONFIG_NET_VENDOR_CHELSIO is not set
# CONFIG_NET_VENDOR_CISCO is not set
# CONFIG_DNET is not set
CONFIG_NET_VENDOR_DEC=y
CONFIG_NET_TULIP=y
# CONFIG_DE2104X is not set
CONFIG_TULIP=y
CONFIG_TULIP_MWI=y
CONFIG_TULIP_MMIO=y
CONFIG_TULIP_NAPI=y
CONFIG_TULIP_NAPI_HW_MITIGATION=y
CONFIG_TULIP_DM910X=y
# CONFIG_DE4X5 is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_DM9102 is not set
# CONFIG_ULI526X is not set
# CONFIG_NET_VENDOR_DLINK is not set
# CONFIG_NET_VENDOR_EMULEX is not set
# CONFIG_NET_VENDOR_EXAR is not set
# CONFIG_NET_VENDOR_HP is not set
# CONFIG_NET_VENDOR_INTEL is not set
# CONFIG_IP1000 is not set
# CONFIG_JME is not set
# CONFIG_NET_VENDOR_MARVELL is not set
# CONFIG_NET_VENDOR_MELLANOX is not set
# CONFIG_NET_VENDOR_MICREL is not set
# CONFIG_NET_VENDOR_MYRI is not set
# CONFIG_FEALNX is not set
# CONFIG_NET_VENDOR_NATSEMI is not set
# CONFIG_NET_VENDOR_NVIDIA is not set
# CONFIG_NET_VENDOR_OKI is not set
# CONFIG_ETHOC is not set
# CONFIG_NET_PACKET_ENGINE is not set
# CONFIG_NET_VENDOR_QLOGIC is not set
# CONFIG_NET_VENDOR_REALTEK is not set
# CONFIG_NET_VENDOR_RDC is not set
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_SILAN is not set
# CONFIG_NET_VENDOR_SIS is not set
# CONFIG_SFC is not set
# CONFIG_NET_VENDOR_SMSC is not set
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_SUN is not set
# CONFIG_NET_VENDOR_TEHUTI is not set
# CONFIG_NET_VENDOR_TI is not set
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PHYLIB is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
#
# USB Network Adapters
#
CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_USBNET=m
CONFIG_USB_NET_AX8817X=m
CONFIG_USB_NET_CDCETHER=m
CONFIG_USB_NET_CDC_EEM=m
CONFIG_USB_NET_CDC_NCM=m
CONFIG_USB_NET_DM9601=m
CONFIG_USB_NET_SMSC75XX=m
CONFIG_USB_NET_SMSC95XX=m
CONFIG_USB_NET_GL620A=m
CONFIG_USB_NET_NET1080=m
CONFIG_USB_NET_PLUSB=m
CONFIG_USB_NET_MCS7830=m
CONFIG_USB_NET_RNDIS_HOST=m
CONFIG_USB_NET_CDC_SUBSET=m
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_BELKIN=y
CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
CONFIG_USB_KC2190=y
CONFIG_USB_NET_ZAURUS=m
CONFIG_USB_NET_CX82310_ETH=m
CONFIG_USB_NET_KALMIA=m
CONFIG_USB_NET_QMI_WWAN=m
CONFIG_USB_NET_INT51X1=m
CONFIG_USB_IPHETH=m
CONFIG_USB_SIERRA_NET=m
# CONFIG_USB_VL600 is not set
# CONFIG_WLAN is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
# CONFIG_WAN is not set
# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=m
# CONFIG_INPUT_POLLDEV is not set
# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
# CONFIG_SERIO is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
# CONFIG_N_GSM is not set
# CONFIG_TRACE_SINK is not set
CONFIG_DEVKMEM=y
#
# Serial drivers
#
# CONFIG_SERIAL_8250 is not set
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MFD_HSU is not set
CONFIG_SERIAL_SUNCORE=y
# CONFIG_SERIAL_SUNZILOG is not set
CONFIG_SERIAL_SUNSU=y
CONFIG_SERIAL_SUNSU_CONSOLE=y
# CONFIG_SERIAL_SUNSAB is not set
# CONFIG_SERIAL_SUNHV is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_PCH_UART is not set
# CONFIG_SERIAL_XILINX_PS_UART is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
# CONFIG_RAMOOPS is not set
CONFIG_I2C=m
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_COMPAT is not set
# CONFIG_I2C_CHARDEV is not set
# CONFIG_I2C_MUX is not set
CONFIG_I2C_HELPER_AUTO=y
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
CONFIG_I2C_ALI1535=m
CONFIG_I2C_ALI1563=m
CONFIG_I2C_ALI15X3=m
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_ISCH is not set
CONFIG_I2C_PIIX4=m
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_DESIGNWARE_PCI is not set
# CONFIG_I2C_EG20T is not set
# CONFIG_I2C_INTEL_MID is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_PXA_PCI is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_DIOLAN_U2C=m
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_SPI is not set
# CONFIG_HSI is not set
#
# PPS support
#
# CONFIG_PPS is not set
#
# PPS generators support
#
#
# PTP clock support
#
#
# Enable Device Drivers -> PPS to see the PTP clock options.
#
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=m
CONFIG_HWMON_VID=m
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Native drivers
#
CONFIG_SENSORS_AD7414=m
CONFIG_SENSORS_AD7418=m
CONFIG_SENSORS_ADM1021=m
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
CONFIG_SENSORS_ADM1029=m
CONFIG_SENSORS_ADM1031=m
CONFIG_SENSORS_ADM9240=m
CONFIG_SENSORS_ADT7411=m
CONFIG_SENSORS_ADT7462=m
CONFIG_SENSORS_ADT7470=m
CONFIG_SENSORS_ADT7475=m
CONFIG_SENSORS_ASC7621=m
CONFIG_SENSORS_ATXP1=m
# CONFIG_SENSORS_DS620 is not set
CONFIG_SENSORS_DS1621=m
# CONFIG_SENSORS_I5K_AMB is not set
CONFIG_SENSORS_F71805F=m
CONFIG_SENSORS_F71882FG=m
CONFIG_SENSORS_F75375S=m
CONFIG_SENSORS_G760A=m
CONFIG_SENSORS_GL518SM=m
CONFIG_SENSORS_GL520SM=m
CONFIG_SENSORS_IT87=m
CONFIG_SENSORS_JC42=m
# CONFIG_SENSORS_LINEAGE is not set
CONFIG_SENSORS_LM63=m
CONFIG_SENSORS_LM73=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM87=m
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_LM92=m
CONFIG_SENSORS_LM93=m
# CONFIG_SENSORS_LTC4151 is not set
CONFIG_SENSORS_LTC4215=m
CONFIG_SENSORS_LTC4245=m
CONFIG_SENSORS_LTC4261=m
CONFIG_SENSORS_LM95241=m
CONFIG_SENSORS_LM95245=m
# CONFIG_SENSORS_MAX16065 is not set
CONFIG_SENSORS_MAX1619=m
CONFIG_SENSORS_MAX1668=m
# CONFIG_SENSORS_MAX6639 is not set
# CONFIG_SENSORS_MAX6642 is not set
CONFIG_SENSORS_MAX6650=m
# CONFIG_SENSORS_MCP3021 is not set
CONFIG_SENSORS_NTC_THERMISTOR=m
CONFIG_SENSORS_PC87360=m
CONFIG_SENSORS_PC87427=m
CONFIG_SENSORS_PCF8591=m
# CONFIG_PMBUS is not set
# CONFIG_SENSORS_SHT21 is not set
CONFIG_SENSORS_SIS5595=m
CONFIG_SENSORS_SMM665=m
CONFIG_SENSORS_DME1737=m
CONFIG_SENSORS_EMC1403=m
CONFIG_SENSORS_EMC2103=m
# CONFIG_SENSORS_EMC6W201 is not set
CONFIG_SENSORS_SMSC47M1=m
CONFIG_SENSORS_SMSC47M192=m
CONFIG_SENSORS_SMSC47B397=m
# CONFIG_SENSORS_SCH56XX_COMMON is not set
# CONFIG_SENSORS_SCH5627 is not set
# CONFIG_SENSORS_SCH5636 is not set
# CONFIG_SENSORS_ADS1015 is not set
CONFIG_SENSORS_ADS7828=m
CONFIG_SENSORS_AMC6821=m
CONFIG_SENSORS_THMC50=m
CONFIG_SENSORS_TMP102=m
CONFIG_SENSORS_TMP401=m
CONFIG_SENSORS_TMP421=m
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
CONFIG_SENSORS_W83781D=m
CONFIG_SENSORS_W83791D=m
CONFIG_SENSORS_W83792D=m
CONFIG_SENSORS_W83793=m
CONFIG_SENSORS_W83795=m
CONFIG_SENSORS_W83795_FANCTRL=y
CONFIG_SENSORS_W83L785TS=m
CONFIG_SENSORS_W83L786NG=m
CONFIG_SENSORS_W83627HF=m
CONFIG_SENSORS_W83627EHF=m
CONFIG_SENSORS_ULTRA45=m
# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
CONFIG_ALIM7101_WDT=m
# CONFIG_WATCHDOG_CP1XXX is not set
# CONFIG_WATCHDOG_RIO is not set
#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set
#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
CONFIG_BCMA_POSSIBLE=y
#
# Broadcom specific AMBA
#
# CONFIG_BCMA is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TPS6105X is not set
# CONFIG_TPS6507X is not set
# CONFIG_MFD_TPS65217 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_ABX500_CORE is not set
# CONFIG_LPC_SCH is not set
# CONFIG_MFD_RDC321X is not set
# CONFIG_MFD_JANZ_CMODIO is not set
# CONFIG_MFD_VX855 is not set
# CONFIG_MFD_WL1273_CORE is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_DRM is not set
# CONFIG_STUB_POULSBO is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_FB is not set
# CONFIG_EXYNOS_VIDEO is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Console display driver support
#
CONFIG_DUMMY_CONSOLE=y
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
CONFIG_HIDRAW=y
#
# USB Input Devices
#
CONFIG_USB_HID=m
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y
#
# Special HID drivers
#
CONFIG_HID_A4TECH=m
# CONFIG_HID_ACRUX is not set
CONFIG_HID_APPLE=m
CONFIG_HID_BELKIN=m
CONFIG_HID_CHERRY=m
CONFIG_HID_CHICONY=m
CONFIG_HID_CYPRESS=m
# CONFIG_HID_DRAGONRISE is not set
# CONFIG_HID_EMS_FF is not set
CONFIG_HID_EZKEY=m
# CONFIG_HID_HOLTEK is not set
# CONFIG_HID_KEYTOUCH is not set
CONFIG_HID_KYE=m
# CONFIG_HID_UCLOGIC is not set
# CONFIG_HID_WALTOP is not set
# CONFIG_HID_GYRATION is not set
# CONFIG_HID_TWINHAN is not set
CONFIG_HID_KENSINGTON=m
# CONFIG_HID_LCPOWER is not set
CONFIG_HID_LOGITECH=m
CONFIG_HID_LOGITECH_DJ=m
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
# CONFIG_LOGIG940_FF is not set
CONFIG_LOGIWHEELS_FF=y
CONFIG_HID_MICROSOFT=m
CONFIG_HID_MONTEREY=m
# CONFIG_HID_MULTITOUCH is not set
# CONFIG_HID_NTRIG is not set
# CONFIG_HID_ORTEK is not set
# CONFIG_HID_PANTHERLORD is not set
# CONFIG_HID_PETALYNX is not set
# CONFIG_HID_PICOLCD is not set
CONFIG_HID_PRIMAX=m
# CONFIG_HID_ROCCAT is not set
CONFIG_HID_SAITEK=m
# CONFIG_HID_SAMSUNG is not set
# CONFIG_HID_SONY is not set
# CONFIG_HID_SPEEDLINK is not set
# CONFIG_HID_SUNPLUS is not set
# CONFIG_HID_GREENASIA is not set
# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TIVO is not set
# CONFIG_HID_TOPSEED is not set
# CONFIG_HID_THRUSTMASTER is not set
# CONFIG_HID_ZEROPLUS is not set
# CONFIG_HID_ZYDACRON is not set
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB_ARCH_HAS_XHCI=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=m
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=m
CONFIG_USB_DEBUG=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_DEVICE_CLASS=y
CONFIG_USB_DYNAMIC_MINORS=y
CONFIG_USB_MON=m
# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_XHCI_HCD is not set
# CONFIG_USB_EHCI_HCD is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_HCD_PLATFORM is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
CONFIG_USB_WDM=m
CONFIG_USB_TMC=m
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_REALTEK=m
CONFIG_USB_STORAGE_DATAFAB=m
CONFIG_USB_STORAGE_FREECOM=m
CONFIG_USB_STORAGE_ISD200=m
CONFIG_USB_STORAGE_USBAT=m
CONFIG_USB_STORAGE_SDDR09=m
CONFIG_USB_STORAGE_SDDR55=m
CONFIG_USB_STORAGE_JUMPSHOT=m
CONFIG_USB_STORAGE_ALAUDA=m
CONFIG_USB_STORAGE_ONETOUCH=m
CONFIG_USB_STORAGE_KARMA=m
CONFIG_USB_STORAGE_CYPRESS_ATACB=m
CONFIG_USB_STORAGE_ENE_UB6250=m
CONFIG_USB_UAS=m
# CONFIG_USB_LIBUSUAL is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
#
# USB port drivers
#
CONFIG_USB_SERIAL=m
CONFIG_USB_EZUSB=y
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_AIRCABLE=m
CONFIG_USB_SERIAL_ARK3116=m
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_CH341=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_CP210X=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_FUNSOFT=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
# CONFIG_USB_SERIAL_F81232 is not set
CONFIG_USB_SERIAL_GARMIN=m
CONFIG_USB_SERIAL_IPW=m
CONFIG_USB_SERIAL_IUU=m
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
CONFIG_USB_SERIAL_KEYSPAN_MPR=y
CONFIG_USB_SERIAL_KEYSPAN_USA28=y
CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
CONFIG_USB_SERIAL_KEYSPAN_USA19=y
CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
# CONFIG_USB_SERIAL_METRO is not set
CONFIG_USB_SERIAL_MOS7720=m
CONFIG_USB_SERIAL_MOS7840=m
CONFIG_USB_SERIAL_MOTOROLA=m
CONFIG_USB_SERIAL_NAVMAN=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_OTI6858=m
CONFIG_USB_SERIAL_QCAUX=m
CONFIG_USB_SERIAL_QUALCOMM=m
CONFIG_USB_SERIAL_SPCP8X5=m
CONFIG_USB_SERIAL_HP4X=m
CONFIG_USB_SERIAL_SAFE=m
CONFIG_USB_SERIAL_SAFE_PADDED=y
CONFIG_USB_SERIAL_SIEMENS_MPI=m
CONFIG_USB_SERIAL_SIERRAWIRELESS=m
CONFIG_USB_SERIAL_SYMBOL=m
CONFIG_USB_SERIAL_TI=m
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_WWAN=m
CONFIG_USB_SERIAL_OPTION=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_SERIAL_OPTICON=m
CONFIG_USB_SERIAL_VIVOPAY_SERIAL=m
CONFIG_USB_SERIAL_ZIO=m
CONFIG_USB_SERIAL_SSU100=m
CONFIG_USB_SERIAL_DEBUG=m
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_YUREX is not set
# CONFIG_USB_GADGET is not set
#
# OTG and related infrastructure
#
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
CONFIG_RTC_INTF_DEV_UIE_EMUL=y
# CONFIG_RTC_DRV_TEST is not set
#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_DS3232 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_ISL12022 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_RX8025 is not set
# CONFIG_RTC_DRV_EM3027 is not set
# CONFIG_RTC_DRV_RV3029C2 is not set
#
# SPI RTC drivers
#
#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
CONFIG_RTC_DRV_M48T59=y
# CONFIG_RTC_DRV_MSM6242 is not set
CONFIG_RTC_DRV_BQ4802=y
# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_SUN4V=y
CONFIG_RTC_DRV_STARFIRE=y
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
#
# Virtio drivers
#
# CONFIG_VIRTIO_PCI is not set
# CONFIG_VIRTIO_BALLOON is not set
# CONFIG_VIRTIO_MMIO is not set
#
# Microsoft Hyper-V guest support
#
# CONFIG_STAGING is not set
#
# Hardware Spinlock drivers
#
# CONFIG_IOMMU_SUPPORT is not set
#
# Remoteproc drivers (EXPERIMENTAL)
#
#
# Rpmsg drivers (EXPERIMENTAL)
#
# CONFIG_VIRT_DRIVERS is not set
# CONFIG_PM_DEVFREQ is not set
#
# Misc Linux/SPARC drivers
#
CONFIG_SUN_OPENPROMIO=m
CONFIG_OBP_FLASH=m
# CONFIG_TADPOLE_TS102_UCTRL is not set
# CONFIG_BBC_I2C is not set
# CONFIG_ENVCTRL is not set
# CONFIG_DISPLAY7SEG is not set
#
# File systems
#
CONFIG_EXT2_FS=m
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=m
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4_FS=y
CONFIG_EXT4_FS_XATTR=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD=m
# CONFIG_JBD_DEBUG is not set
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
CONFIG_JFS_FS=m
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
CONFIG_XFS_FS=m
# CONFIG_XFS_QUOTA is not set
CONFIG_XFS_POSIX_ACL=y
CONFIG_XFS_RT=y
# CONFIG_XFS_DEBUG is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=m
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
# CONFIG_QUOTA_DEBUG is not set
CONFIG_QUOTA_TREE=m
CONFIG_QFMT_V1=m
CONFIG_QFMT_V2=m
CONFIG_QUOTACTL=y
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
CONFIG_CUSE=m
CONFIG_GENERIC_ACL=y
#
# Caches
#
# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=775
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-15"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_XATTR=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=y
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
CONFIG_AFFS_FS=m
CONFIG_ECRYPT_FS=m
CONFIG_HFS_FS=m
CONFIG_HFSPLUS_FS=m
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
CONFIG_EFS_FS=m
# CONFIG_LOGFS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_MINIX_FS_NATIVE_ENDIAN is not set
CONFIG_OMFS_FS=m
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX6FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_PSTORE is not set
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
# CONFIG_NFS_V4_1 is not set
# CONFIG_NFS_USE_LEGACY_DNS is not set
CONFIG_NFS_USE_KERNEL_DNS=y
CONFIG_NFSD=m
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
# CONFIG_NFSD_FAULT_INJECTION is not set
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_NFS_ACL_SUPPORT=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_RPCSEC_GSS_KRB5=m
# CONFIG_SUNRPC_DEBUG is not set
# CONFIG_CEPH_FS is not set
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
CONFIG_CIFS_WEAK_PW_HASH=y
CONFIG_CIFS_UPCALL=y
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
# CONFIG_CIFS_DEBUG2 is not set
CONFIG_CIFS_DFS_UPCALL=y
CONFIG_CIFS_ACL=y
# CONFIG_NCP_FS is not set
CONFIG_CODA_FS=m
# CONFIG_AFS_FS is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="UTF-8"
CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=m
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
# CONFIG_DLM is not set
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_SECTION_MISMATCH=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_SHIRQ=y
CONFIG_LOCKUP_DETECTOR=y
# CONFIG_HARDLOCKUP_DETECTOR is not set
# CONFIG_BOOTPARAM_HARDLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_HARDLOCKUP_PANIC_VALUE=0
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
CONFIG_TIMER_STATS=y
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_SPARSE_RCU_POINTER is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_ATOMIC_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_DEBUG_STACK_USAGE=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_TEST_LIST_SORT is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_TRACE is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_ASYNC_RAID6_TEST is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
# CONFIG_TEST_KSTRTOX is not set
# CONFIG_DEBUG_DCFLUSH is not set
#
# Security options
#
CONFIG_KEYS=y
# CONFIG_ENCRYPTED_KEYS is not set
CONFIG_KEYS_DEBUG_PROC_KEYS=y
# CONFIG_SECURITY_DMESG_RESTRICT is not set
CONFIG_SECURITY=y
CONFIG_SECURITYFS=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_NETWORK_XFRM=y
# CONFIG_SECURITY_PATH is not set
# CONFIG_SECURITY_TOMOYO is not set
# CONFIG_SECURITY_APPARMOR is not set
# CONFIG_SECURITY_YAMA is not set
# CONFIG_IMA is not set
# CONFIG_EVM is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
CONFIG_XOR_BLOCKS=m
CONFIG_ASYNC_CORE=m
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_ASYNC_PQ=m
CONFIG_ASYNC_RAID6_RECOV=m
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=m
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=m
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP=m
CONFIG_CRYPTO_PCOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_USER=m
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_AUTHENC=m
# CONFIG_CRYPTO_TEST is not set
#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=m
CONFIG_CRYPTO_SEQIV=m
#
# Block modes
#
CONFIG_CRYPTO_CBC=m
CONFIG_CRYPTO_CTR=m
CONFIG_CRYPTO_CTS=m
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=m
#
# Hash modes
#
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_VMAC=m
#
# Digest
#
CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_GHASH=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD128=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_RMD256=m
CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
#
# Ciphers
#
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_BLOWFISH_COMMON=m
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
#
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=m
#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=m
# CONFIG_CRYPTO_USER_API_HASH is not set
# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
# CONFIG_CRYPTO_HW is not set
# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_RAID6_PQ=m
CONFIG_BITREVERSE=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IO=y
# CONFIG_CRC_CCITT is not set
CONFIG_CRC16=y
# CONFIG_CRC_T10DIF is not set
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
# CONFIG_CRC8 is not set
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
CONFIG_LZO_COMPRESS=m
CONFIG_LZO_DECOMPRESS=m
# CONFIG_XZ_DEC is not set
# CONFIG_XZ_DEC_BCJ is not set
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_DQL=y
CONFIG_NLATTR=y
CONFIG_LRU_CACHE=m
# CONFIG_AVERAGE is not set
# CONFIG_CORDIC is not set
--
Meelis Roos ([email protected])
From: Meelis Roos <[email protected]>
Date: Tue, 22 May 2012 12:14:05 +0300 (EEST)
> Just tested 3.4.0-02580-g72c04af on about 10 machines. While most of
> them work (including 3 different sparc64 machines with real scsi disks),
> Sun Netra X1 with pata_ali and IDE disk consistently fails to boot. sda
> is recognized but no partitions. 3.3.0 works fine, as did something
> around 3.4-rc7 (plain 3.4 not tested yet). No other IDE machines tested
> yet since I have none with remote console at the moment.
3.4-rc7 until 72c04af is about 3500 changes, we'll need to narrow this
down further.
I would first check to make sure that 3.4.0-final doesn't have the
problem.
If 3.4.0-final is OK, start bisecting from v3.4.0 until 72c04af. One
possibility could be the sparc64 NOBOOTMEM conversion that went into
the merge window.
> > Just tested 3.4.0-02580-g72c04af on about 10 machines. While most of
> > them work (including 3 different sparc64 machines with real scsi disks),
> > Sun Netra X1 with pata_ali and IDE disk consistently fails to boot. sda
> > is recognized but no partitions. 3.3.0 works fine, as did something
> > around 3.4-rc7 (plain 3.4 not tested yet). No other IDE machines tested
> > yet since I have none with remote console at the moment.
>
> 3.4-rc7 until 72c04af is about 3500 changes, we'll need to narrow this
> down further.
>
> I would first check to make sure that 3.4.0-final doesn't have the
> problem.
>
> If 3.4.0-final is OK, start bisecting from v3.4.0 until 72c04af. One
> possibility could be the sparc64 NOBOOTMEM conversion that went into
> the merge window.
Meanwhile tested that 3.4 was OK and started bisecting. It will take
time because I can access the system only some iterations per day.
--
Meelis Roos ([email protected])
From: Meelis Roos <[email protected]>
Date: Tue, 22 May 2012 22:17:57 +0300 (EEST)
>> > Just tested 3.4.0-02580-g72c04af on about 10 machines. While most of
>> > them work (including 3 different sparc64 machines with real scsi disks),
>> > Sun Netra X1 with pata_ali and IDE disk consistently fails to boot. sda
>> > is recognized but no partitions. 3.3.0 works fine, as did something
>> > around 3.4-rc7 (plain 3.4 not tested yet). No other IDE machines tested
>> > yet since I have none with remote console at the moment.
>>
>> 3.4-rc7 until 72c04af is about 3500 changes, we'll need to narrow this
>> down further.
>>
>> I would first check to make sure that 3.4.0-final doesn't have the
>> problem.
>>
>> If 3.4.0-final is OK, start bisecting from v3.4.0 until 72c04af. One
>> possibility could be the sparc64 NOBOOTMEM conversion that went into
>> the merge window.
>
> Meanwhile tested that 3.4 was OK and started bisecting. It will take
> time because I can access the system only some iterations per day.
Ok, thanks a lot.
> > Just tested 3.4.0-02580-g72c04af on about 10 machines. While most of
> > them work (including 3 different sparc64 machines with real scsi disks),
> > Sun Netra X1 with pata_ali and IDE disk consistently fails to boot. sda
> > is recognized but no partitions. 3.3.0 works fine, as did something
> > around 3.4-rc7 (plain 3.4 not tested yet). No other IDE machines tested
> > yet since I have none with remote console at the moment.
>
> If 3.4.0-final is OK, start bisecting from v3.4.0 until 72c04af. One
> possibility could be the sparc64 NOBOOTMEM conversion that went into
> the merge window.
Bisecting leads to this commit:
a7a20d103994fd760766e6c9d494daa569cbfe06 is the first bad commit
commit a7a20d103994fd760766e6c9d494daa569cbfe06
Author: Dan Williams <[email protected]>
Date: Thu Mar 22 17:05:11 2012 -0700
[SCSI] sd: limit the scope of the async probe domain
sd injects and synchronizes probe work on the global kernel-wide domain.
This runs into conflict with PM that wants to perform resume actions in
async context:
[ 494.237079] INFO: task kworker/u:3:554 blocked for more than 120 seconds.
[ 494.294396] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 494.360809] kworker/u:3 D 0000000000000000 0 554 2 0x00000000
[ 494.420739] ffff88012e4d3af0 0000000000000046 ffff88013200c160 ffff88012e4d3fd8
[ 494.484392] ffff88012e4d3fd8 0000000000012500 ffff8801394ea0b0 ffff88013200c160
[ 494.548038] ffff88012e4d3ae0 00000000000001e3 ffffffff81a249e0 ffff8801321c5398
[ 494.611685] Call Trace:
[ 494.632649] [<ffffffff8149dd25>] schedule+0x5a/0x5c
[ 494.674687] [<ffffffff8104b968>] async_synchronize_cookie_domain+0xb6/0x112
[ 494.734177] [<ffffffff810461ff>] ? __init_waitqueue_head+0x50/0x50
[ 494.787134] [<ffffffff8131a224>] ? scsi_remove_target+0x48/0x48
[ 494.837900] [<ffffffff8104b9d9>] async_synchronize_cookie+0x15/0x17
[ 494.891567] [<ffffffff8104ba49>] async_synchronize_full+0x54/0x70 <-- here we wait for async contexts to complete
[ 494.943783] [<ffffffff8104b9f5>] ? async_synchronize_full_domain+0x1a/0x1a
[ 495.002547] [<ffffffffa00114b1>] sd_remove+0x2c/0xa2 [sd_mod]
[ 495.051861] [<ffffffff812fe94f>] __device_release_driver+0x86/0xcf
[ 495.104807] [<ffffffff812fe9bd>] device_release_driver+0x25/0x32 <-- here we take device_lock()
[ 853.511341] INFO: task kworker/u:4:549 blocked for more than 120 seconds.
[ 853.568693] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 853.635119] kworker/u:4 D ffff88013097b5d0 0 549 2 0x00000000
[ 853.695129] ffff880132773c40 0000000000000046 ffff880130790000 ffff880132773fd8
[ 853.758990] ffff880132773fd8 0000000000012500 ffff88013288a0b0 ffff880130790000
[ 853.822796] 0000000000000246 0000000000000040 ffff88013097b5c8 ffff880130790000
[ 853.886633] Call Trace:
[ 853.907631] [<ffffffff8149dd25>] schedule+0x5a/0x5c
[ 853.949670] [<ffffffff8149cc44>] __mutex_lock_common+0x220/0x351
[ 854.001225] [<ffffffff81304bd7>] ? device_resume+0x58/0x1c4
[ 854.049082] [<ffffffff81304bd7>] ? device_resume+0x58/0x1c4
[ 854.097011] [<ffffffff8149ce48>] mutex_lock_nested+0x2f/0x36 <-- here we wait for device_lock()
[ 854.145591] [<ffffffff81304bd7>] device_resume+0x58/0x1c4
[ 854.192066] [<ffffffff81304d61>] async_resume+0x1e/0x45
[ 854.237019] [<ffffffff8104bc93>] async_run_entry_fn+0xc6/0x173 <-- ...while running in async context
Provide a 'scsi_sd_probe_domain' so that async probe actions actions can
be flushed without regard for the state of PM, and allow for the resume
path to handle devices that have transitioned from SDEV_QUIESCE to
SDEV_DEL prior to resume.
Acked-by: Alan Stern <[email protected]>
[alan: uplevel scsi_sd_probe_domain, clarify scsi_device_resume]
Signed-off-by: Dan Williams <[email protected]>
[jejb: remove unneeded config guards in include file]
Signed-off-by: James Bottomley <[email protected]>
:040000 040000 4e59ccb852f261f97701a245e637a690dfce9d20 fc73ca0da1288a7f30b81a8593ddad2146d7bfb5 M drivers
--
Meelis Roos ([email protected])
From: Meelis Roos <[email protected]>
Date: Wed, 23 May 2012 19:46:46 +0300 (EEST)
CC:'ing interested parties.
>> > Just tested 3.4.0-02580-g72c04af on about 10 machines. While most of
>> > them work (including 3 different sparc64 machines with real scsi disks),
>> > Sun Netra X1 with pata_ali and IDE disk consistently fails to boot. sda
>> > is recognized but no partitions. 3.3.0 works fine, as did something
>> > around 3.4-rc7 (plain 3.4 not tested yet). No other IDE machines tested
>> > yet since I have none with remote console at the moment.
>>
>> If 3.4.0-final is OK, start bisecting from v3.4.0 until 72c04af. One
>> possibility could be the sparc64 NOBOOTMEM conversion that went into
>> the merge window.
>
> Bisecting leads to this commit:
>
> a7a20d103994fd760766e6c9d494daa569cbfe06 is the first bad commit
> commit a7a20d103994fd760766e6c9d494daa569cbfe06
> Author: Dan Williams <[email protected]>
> Date: Thu Mar 22 17:05:11 2012 -0700
>
> [SCSI] sd: limit the scope of the async probe domain
>
> sd injects and synchronizes probe work on the global kernel-wide domain.
> This runs into conflict with PM that wants to perform resume actions in
> async context:
>
> [ 494.237079] INFO: task kworker/u:3:554 blocked for more than 120 seconds.
> [ 494.294396] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
> [ 494.360809] kworker/u:3 D 0000000000000000 0 554 2 0x00000000
> [ 494.420739] ffff88012e4d3af0 0000000000000046 ffff88013200c160 ffff88012e4d3fd8
> [ 494.484392] ffff88012e4d3fd8 0000000000012500 ffff8801394ea0b0 ffff88013200c160
> [ 494.548038] ffff88012e4d3ae0 00000000000001e3 ffffffff81a249e0 ffff8801321c5398
> [ 494.611685] Call Trace:
> [ 494.632649] [<ffffffff8149dd25>] schedule+0x5a/0x5c
> [ 494.674687] [<ffffffff8104b968>] async_synchronize_cookie_domain+0xb6/0x112
> [ 494.734177] [<ffffffff810461ff>] ? __init_waitqueue_head+0x50/0x50
> [ 494.787134] [<ffffffff8131a224>] ? scsi_remove_target+0x48/0x48
> [ 494.837900] [<ffffffff8104b9d9>] async_synchronize_cookie+0x15/0x17
> [ 494.891567] [<ffffffff8104ba49>] async_synchronize_full+0x54/0x70 <-- here we wait for async contexts to complete
> [ 494.943783] [<ffffffff8104b9f5>] ? async_synchronize_full_domain+0x1a/0x1a
> [ 495.002547] [<ffffffffa00114b1>] sd_remove+0x2c/0xa2 [sd_mod]
> [ 495.051861] [<ffffffff812fe94f>] __device_release_driver+0x86/0xcf
> [ 495.104807] [<ffffffff812fe9bd>] device_release_driver+0x25/0x32 <-- here we take device_lock()
>
> [ 853.511341] INFO: task kworker/u:4:549 blocked for more than 120 seconds.
> [ 853.568693] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
> [ 853.635119] kworker/u:4 D ffff88013097b5d0 0 549 2 0x00000000
> [ 853.695129] ffff880132773c40 0000000000000046 ffff880130790000 ffff880132773fd8
> [ 853.758990] ffff880132773fd8 0000000000012500 ffff88013288a0b0 ffff880130790000
> [ 853.822796] 0000000000000246 0000000000000040 ffff88013097b5c8 ffff880130790000
> [ 853.886633] Call Trace:
> [ 853.907631] [<ffffffff8149dd25>] schedule+0x5a/0x5c
> [ 853.949670] [<ffffffff8149cc44>] __mutex_lock_common+0x220/0x351
> [ 854.001225] [<ffffffff81304bd7>] ? device_resume+0x58/0x1c4
> [ 854.049082] [<ffffffff81304bd7>] ? device_resume+0x58/0x1c4
> [ 854.097011] [<ffffffff8149ce48>] mutex_lock_nested+0x2f/0x36 <-- here we wait for device_lock()
> [ 854.145591] [<ffffffff81304bd7>] device_resume+0x58/0x1c4
> [ 854.192066] [<ffffffff81304d61>] async_resume+0x1e/0x45
> [ 854.237019] [<ffffffff8104bc93>] async_run_entry_fn+0xc6/0x173 <-- ...while running in async context
>
> Provide a 'scsi_sd_probe_domain' so that async probe actions actions can
> be flushed without regard for the state of PM, and allow for the resume
> path to handle devices that have transitioned from SDEV_QUIESCE to
> SDEV_DEL prior to resume.
>
> Acked-by: Alan Stern <[email protected]>
> [alan: uplevel scsi_sd_probe_domain, clarify scsi_device_resume]
> Signed-off-by: Dan Williams <[email protected]>
> [jejb: remove unneeded config guards in include file]
> Signed-off-by: James Bottomley <[email protected]>
>
> :040000 040000 4e59ccb852f261f97701a245e637a690dfce9d20 fc73ca0da1288a7f30b81a8593ddad2146d7bfb5 M drivers
>
> --
> Meelis Roos ([email protected])
On Wed, 23 May 2012, David Miller wrote:
> From: Meelis Roos <[email protected]>
> Date: Wed, 23 May 2012 19:46:46 +0300 (EEST)
>
> CC:'ing interested parties.
>
> >> > Just tested 3.4.0-02580-g72c04af on about 10 machines. While most of
> >> > them work (including 3 different sparc64 machines with real scsi disks),
> >> > Sun Netra X1 with pata_ali and IDE disk consistently fails to boot. sda
> >> > is recognized but no partitions. 3.3.0 works fine, as did something
> >> > around 3.4-rc7 (plain 3.4 not tested yet). No other IDE machines tested
> >> > yet since I have none with remote console at the moment.
> >>
> >> If 3.4.0-final is OK, start bisecting from v3.4.0 until 72c04af. One
> >> possibility could be the sparc64 NOBOOTMEM conversion that went into
> >> the merge window.
> >
> > Bisecting leads to this commit:
> >
> > a7a20d103994fd760766e6c9d494daa569cbfe06 is the first bad commit
> > commit a7a20d103994fd760766e6c9d494daa569cbfe06
> > Author: Dan Williams <[email protected]>
> > Date: Thu Mar 22 17:05:11 2012 -0700
> >
> > [SCSI] sd: limit the scope of the async probe domain
> >
> > sd injects and synchronizes probe work on the global kernel-wide domain.
> > This runs into conflict with PM that wants to perform resume actions in
> > async context:
...
> > Provide a 'scsi_sd_probe_domain' so that async probe actions actions can
> > be flushed without regard for the state of PM, and allow for the resume
> > path to handle devices that have transitioned from SDEV_QUIESCE to
> > SDEV_DEL prior to resume.
Does reverting just the part of the commit that touches scsi_lib.c make
any difference?
If not, does leaving that part in and reverting all the rest of the
commit make any difference?
Alan Stern
On Wed, 2012-05-23 at 14:04 -0400, David Miller wrote:
> From: Meelis Roos <[email protected]>
> Date: Wed, 23 May 2012 19:46:46 +0300 (EEST)
>
> CC:'ing interested parties.
>
> >> > Just tested 3.4.0-02580-g72c04af on about 10 machines. While most of
> >> > them work (including 3 different sparc64 machines with real scsi disks),
> >> > Sun Netra X1 with pata_ali and IDE disk consistently fails to boot. sda
> >> > is recognized but no partitions. 3.3.0 works fine, as did something
> >> > around 3.4-rc7 (plain 3.4 not tested yet). No other IDE machines tested
> >> > yet since I have none with remote console at the moment.
> >>
> >> If 3.4.0-final is OK, start bisecting from v3.4.0 until 72c04af. One
> >> possibility could be the sparc64 NOBOOTMEM conversion that went into
> >> the merge window.
> >
> > Bisecting leads to this commit:
> >
> > a7a20d103994fd760766e6c9d494daa569cbfe06 is the first bad commit
> > commit a7a20d103994fd760766e6c9d494daa569cbfe06
> > Author: Dan Williams <[email protected]>
> > Date: Thu Mar 22 17:05:11 2012 -0700
> >
> > [SCSI] sd: limit the scope of the async probe domain
My theory is that this is an init problem: The assumption in a lot of
our code is that async_synchronize_full() waits for everything ... even
the domain specific async schedules, which isn't true.
The code in init that makes this assumption is wait_for_device_probe().
There's also a fun async_synchronize_full() in init_post() that assumes
it can free the init memory after, which would fail badly if anything in
init used an async domain.
So either we fix the assumptions or we can't use domain specific async
schedules.
James
On Wed, 2012-05-23 at 23:56 +0100, James Bottomley wrote:
> On Wed, 2012-05-23 at 14:04 -0400, David Miller wrote:
> > From: Meelis Roos <[email protected]>
> > Date: Wed, 23 May 2012 19:46:46 +0300 (EEST)
> >
> > CC:'ing interested parties.
> >
> > >> > Just tested 3.4.0-02580-g72c04af on about 10 machines. While most of
> > >> > them work (including 3 different sparc64 machines with real scsi disks),
> > >> > Sun Netra X1 with pata_ali and IDE disk consistently fails to boot. sda
> > >> > is recognized but no partitions. 3.3.0 works fine, as did something
> > >> > around 3.4-rc7 (plain 3.4 not tested yet). No other IDE machines tested
> > >> > yet since I have none with remote console at the moment.
> > >>
> > >> If 3.4.0-final is OK, start bisecting from v3.4.0 until 72c04af. One
> > >> possibility could be the sparc64 NOBOOTMEM conversion that went into
> > >> the merge window.
> > >
> > > Bisecting leads to this commit:
> > >
> > > a7a20d103994fd760766e6c9d494daa569cbfe06 is the first bad commit
> > > commit a7a20d103994fd760766e6c9d494daa569cbfe06
> > > Author: Dan Williams <[email protected]>
> > > Date: Thu Mar 22 17:05:11 2012 -0700
> > >
> > > [SCSI] sd: limit the scope of the async probe domain
>
> My theory is that this is an init problem: The assumption in a lot of
> our code is that async_synchronize_full() waits for everything ... even
> the domain specific async schedules, which isn't true.
>
> The code in init that makes this assumption is wait_for_device_probe().
> There's also a fun async_synchronize_full() in init_post() that assumes
> it can free the init memory after, which would fail badly if anything in
> init used an async domain.
>
> So either we fix the assumptions or we can't use domain specific async
> schedules.
>
Hm, we already have cases of code not trusting the semantics of
wait_for_device_probe(), especially as it relates to async scanning like
in kernel/power/hibernate.c:
/*
* Some device discovery might still be in progress; we need
* to wait for this to finish.
*/
wait_for_device_probe();
if (resume_wait) {
while ((swsusp_resume_device = name_to_dev_t(resume_file)) == 0)
msleep(10);
async_synchronize_full();
}
/*
* We can't depend on SCSI devices being available after loading
* one of their modules until scsi_complete_async_scans() is
* called and the resume device usually is a SCSI one.
*/
scsi_complete_async_scans();
...so it seems scsi_complete_async_scans() should take care to flush sd
probe actions as well... here is a test patch:
--- snip ---
diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
index 8906557..05a92d3 100644
--- a/drivers/scsi/scsi_scan.c
+++ b/drivers/scsi/scsi_scan.c
@@ -141,13 +141,13 @@ struct async_scan_data {
* started scanning after this function was called may or may not have
* finished.
*/
-int scsi_complete_async_scans(void)
+static void __scsi_complete_async_scans(void)
{
struct async_scan_data *data;
do {
if (list_empty(&scanning_hosts))
- return 0;
+ return;
/* If we can't get memory immediately, that's OK. Just
* sleep a little. Even if we never get memory, the async
* scans will finish eventually.
@@ -181,6 +181,13 @@ int scsi_complete_async_scans(void)
spin_unlock(&async_scan_lock);
kfree(data);
+}
+
+int scsi_complete_async_scans(void)
+{
+ __scsi_complete_async_scans();
+ async_synchronize_full_domain(&scsi_sd_probe_domain);
+
return 0;
}
On Wed, 2012-05-23 at 19:22 -0700, Dan Williams wrote:
> On Wed, 2012-05-23 at 23:56 +0100, James Bottomley wrote:
> > On Wed, 2012-05-23 at 14:04 -0400, David Miller wrote:
> > > From: Meelis Roos <[email protected]>
> > > Date: Wed, 23 May 2012 19:46:46 +0300 (EEST)
> > >
> > > CC:'ing interested parties.
> > >
> > > >> > Just tested 3.4.0-02580-g72c04af on about 10 machines. While most of
> > > >> > them work (including 3 different sparc64 machines with real scsi disks),
> > > >> > Sun Netra X1 with pata_ali and IDE disk consistently fails to boot. sda
> > > >> > is recognized but no partitions. 3.3.0 works fine, as did something
> > > >> > around 3.4-rc7 (plain 3.4 not tested yet). No other IDE machines tested
> > > >> > yet since I have none with remote console at the moment.
> > > >>
> > > >> If 3.4.0-final is OK, start bisecting from v3.4.0 until 72c04af. One
> > > >> possibility could be the sparc64 NOBOOTMEM conversion that went into
> > > >> the merge window.
> > > >
> > > > Bisecting leads to this commit:
> > > >
> > > > a7a20d103994fd760766e6c9d494daa569cbfe06 is the first bad commit
> > > > commit a7a20d103994fd760766e6c9d494daa569cbfe06
> > > > Author: Dan Williams <[email protected]>
> > > > Date: Thu Mar 22 17:05:11 2012 -0700
> > > >
> > > > [SCSI] sd: limit the scope of the async probe domain
> >
> > My theory is that this is an init problem: The assumption in a lot of
> > our code is that async_synchronize_full() waits for everything ... even
> > the domain specific async schedules, which isn't true.
> >
> > The code in init that makes this assumption is wait_for_device_probe().
> > There's also a fun async_synchronize_full() in init_post() that assumes
> > it can free the init memory after, which would fail badly if anything in
> > init used an async domain.
> >
> > So either we fix the assumptions or we can't use domain specific async
> > schedules.
> >
>
> Hm, we already have cases of code not trusting the semantics of
> wait_for_device_probe(), especially as it relates to async scanning like
> in kernel/power/hibernate.c:
>
> /*
> * Some device discovery might still be in progress; we need
> * to wait for this to finish.
> */
> wait_for_device_probe();
>
> if (resume_wait) {
> while ((swsusp_resume_device = name_to_dev_t(resume_file)) == 0)
> msleep(10);
> async_synchronize_full();
> }
>
> /*
> * We can't depend on SCSI devices being available after loading
> * one of their modules until scsi_complete_async_scans() is
> * called and the resume device usually is a SCSI one.
> */
> scsi_complete_async_scans();
This is actually looks wrong: it works if SCSI is built in, but it's a
nop if SCSI is a module (the nop function is gated by the else clause of
#ifdef CONFIG_SCSI)
Rafael, you added this not via the SCSI tree, is that the intention?
> ...so it seems scsi_complete_async_scans() should take care to flush sd
> probe actions as well... here is a test patch:
>
> --- snip ---
>
> diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
> index 8906557..05a92d3 100644
> --- a/drivers/scsi/scsi_scan.c
> +++ b/drivers/scsi/scsi_scan.c
> @@ -141,13 +141,13 @@ struct async_scan_data {
> * started scanning after this function was called may or may not have
> * finished.
> */
> -int scsi_complete_async_scans(void)
> +static void __scsi_complete_async_scans(void)
> {
> struct async_scan_data *data;
>
> do {
> if (list_empty(&scanning_hosts))
> - return 0;
> + return;
> /* If we can't get memory immediately, that's OK. Just
> * sleep a little. Even if we never get memory, the async
> * scans will finish eventually.
> @@ -181,6 +181,13 @@ int scsi_complete_async_scans(void)
> spin_unlock(&async_scan_lock);
>
> kfree(data);
> +}
> +
> +int scsi_complete_async_scans(void)
> +{
> + __scsi_complete_async_scans();
> + async_synchronize_full_domain(&scsi_sd_probe_domain);
> +
> return 0;
> }
But this still doesn't fix the boot problem, does it? ... unless we want
to add a scsi_complete_async_scans() into init/do_mounts.c, which looks
like piling one hack on top of another.
I really think the correct fix is to have wait_for_device_probe()
actually wait until all probes have completed and everything is
discovered, that way we get the semantics the name implies and boot
should just work.
James
On Thu, May 24, 2012 at 12:42 AM, James Bottomley
<[email protected]> wrote:
> On Wed, 2012-05-23 at 19:22 -0700, Dan Williams wrote:
>> On Wed, 2012-05-23 at 23:56 +0100, James Bottomley wrote:
>> > On Wed, 2012-05-23 at 14:04 -0400, David Miller wrote:
>> > > From: Meelis Roos <[email protected]>
>> > > Date: Wed, 23 May 2012 19:46:46 +0300 (EEST)
>> > >
>> > > CC:'ing interested parties.
>> > >
>> > > >> > Just tested 3.4.0-02580-g72c04af on about 10 machines. While most of
>> > > >> > them work (including 3 different sparc64 machines with real scsi disks),
>> > > >> > Sun Netra X1 with pata_ali and IDE disk consistently fails to boot. sda
>> > > >> > is recognized but no partitions. 3.3.0 works fine, as did something
>> > > >> > around 3.4-rc7 (plain 3.4 not tested yet). No other IDE machines tested
>> > > >> > yet since I have none with remote console at the moment.
>> > > >>
>> > > >> If 3.4.0-final is OK, start bisecting from v3.4.0 until 72c04af. ?One
>> > > >> possibility could be the sparc64 NOBOOTMEM conversion that went into
>> > > >> the merge window.
>> > > >
>> > > > Bisecting leads to this commit:
>> > > >
>> > > > a7a20d103994fd760766e6c9d494daa569cbfe06 is the first bad commit
>> > > > commit a7a20d103994fd760766e6c9d494daa569cbfe06
>> > > > Author: Dan Williams <[email protected]>
>> > > > Date: ? Thu Mar 22 17:05:11 2012 -0700
>> > > >
>> > > > ? ? [SCSI] sd: limit the scope of the async probe domain
>> >
>> > My theory is that this is an init problem: The assumption in a lot of
>> > our code is that async_synchronize_full() waits for everything ... even
>> > the domain specific async schedules, which isn't true.
>> >
>> > The code in init that makes this assumption is wait_for_device_probe().
>> > There's also a fun async_synchronize_full() in init_post() that assumes
>> > it can free the init memory after, which would fail badly if anything in
>> > init used an async domain.
>> >
>> > So either we fix the assumptions or we can't use domain specific async
>> > schedules.
>> >
>>
>> Hm, we already have cases of code not trusting the semantics of
>> wait_for_device_probe(), especially as it relates to async scanning like
>> in kernel/power/hibernate.c:
>>
>> ? ? ? ? ? ? ? ? /*
>> ? ? ? ? ? ? ? ? ?* Some device discovery might still be in progress; we need
>> ? ? ? ? ? ? ? ? ?* to wait for this to finish.
>> ? ? ? ? ? ? ? ? ?*/
>> ? ? ? ? ? ? ? ? wait_for_device_probe();
>>
>> ? ? ? ? ? ? ? ? if (resume_wait) {
>> ? ? ? ? ? ? ? ? ? ? ? ? while ((swsusp_resume_device = name_to_dev_t(resume_file)) == 0)
>> ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? msleep(10);
>> ? ? ? ? ? ? ? ? ? ? ? ? async_synchronize_full();
>> ? ? ? ? ? ? ? ? }
>>
>> ? ? ? ? ? ? ? ? /*
>> ? ? ? ? ? ? ? ? ?* We can't depend on SCSI devices being available after loading
>> ? ? ? ? ? ? ? ? ?* one of their modules until scsi_complete_async_scans() is
>> ? ? ? ? ? ? ? ? ?* called and the resume device usually is a SCSI one.
>> ? ? ? ? ? ? ? ? ?*/
>> ? ? ? ? ? ? ? ? scsi_complete_async_scans();
>
> This is actually looks wrong: it works if SCSI is built in, but it's a
> nop if SCSI is a module (the nop function is gated by the else clause of
> #ifdef CONFIG_SCSI)
>
> Rafael, you added this not via the SCSI tree, is that the intention?
>
>> ...so it seems scsi_complete_async_scans() should take care to flush sd
>> probe actions as well... here is a test patch:
>>
>> --- snip ---
>>
>> diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
>> index 8906557..05a92d3 100644
>> --- a/drivers/scsi/scsi_scan.c
>> +++ b/drivers/scsi/scsi_scan.c
>> @@ -141,13 +141,13 @@ struct async_scan_data {
>> ? * started scanning after this function was called may or may not have
>> ? * finished.
>> ? */
>> -int scsi_complete_async_scans(void)
>> +static void __scsi_complete_async_scans(void)
>> ?{
>> ? ? ? ? struct async_scan_data *data;
>>
>> ? ? ? ? do {
>> ? ? ? ? ? ? ? ? if (list_empty(&scanning_hosts))
>> - ? ? ? ? ? ? ? ? ? ? ? return 0;
>> + ? ? ? ? ? ? ? ? ? ? ? return;
>> ? ? ? ? ? ? ? ? /* If we can't get memory immediately, that's OK. ?Just
>> ? ? ? ? ? ? ? ? ?* sleep a little. ?Even if we never get memory, the async
>> ? ? ? ? ? ? ? ? ?* scans will finish eventually.
>> @@ -181,6 +181,13 @@ int scsi_complete_async_scans(void)
>> ? ? ? ? spin_unlock(&async_scan_lock);
>>
>> ? ? ? ? kfree(data);
>> +}
>> +
>> +int scsi_complete_async_scans(void)
>> +{
>> + ? ? ? __scsi_complete_async_scans();
>> + ? ? ? async_synchronize_full_domain(&scsi_sd_probe_domain);
>> +
>> ? ? ? ? return 0;
>> ?}
>
> But this still doesn't fix the boot problem, does it? ... unless we want
> to add a scsi_complete_async_scans() into init/do_mounts.c, which looks
> like piling one hack on top of another.
I managed to convince myself that one in prepare_namespace() was
probably not needed because of the late_initcall of
scsi_complete_async_scans() in the built-in case and in the module
case the initramfs should be taking care of it.
> I really think the correct fix is to have wait_for_device_probe()
> actually wait until all probes have completed and everything is
> discovered, that way we get the semantics the name implies and boot
> should just work.
>
...but wouldn't it need to go something like:
wait_for_device_probe(); /* all pci drivers probed */
scsi_complete_async_scans(): /* flush host scans */
wait_for_device_probe(); /* all recently attached sd devices probed */
?
--
Dan
On Thu, 2012-05-24 at 00:54 -0700, Dan Williams wrote:
> On Thu, May 24, 2012 at 12:42 AM, James Bottomley
> <[email protected]> wrote:
> > On Wed, 2012-05-23 at 19:22 -0700, Dan Williams wrote:
> >> On Wed, 2012-05-23 at 23:56 +0100, James Bottomley wrote:
> >> > On Wed, 2012-05-23 at 14:04 -0400, David Miller wrote:
> >> > > From: Meelis Roos <[email protected]>
> >> > > Date: Wed, 23 May 2012 19:46:46 +0300 (EEST)
> >> > >
> >> > > CC:'ing interested parties.
> >> > >
> >> > > >> > Just tested 3.4.0-02580-g72c04af on about 10 machines. While most of
> >> > > >> > them work (including 3 different sparc64 machines with real scsi disks),
> >> > > >> > Sun Netra X1 with pata_ali and IDE disk consistently fails to boot. sda
> >> > > >> > is recognized but no partitions. 3.3.0 works fine, as did something
> >> > > >> > around 3.4-rc7 (plain 3.4 not tested yet). No other IDE machines tested
> >> > > >> > yet since I have none with remote console at the moment.
> >> > > >>
> >> > > >> If 3.4.0-final is OK, start bisecting from v3.4.0 until 72c04af. One
> >> > > >> possibility could be the sparc64 NOBOOTMEM conversion that went into
> >> > > >> the merge window.
> >> > > >
> >> > > > Bisecting leads to this commit:
> >> > > >
> >> > > > a7a20d103994fd760766e6c9d494daa569cbfe06 is the first bad commit
> >> > > > commit a7a20d103994fd760766e6c9d494daa569cbfe06
> >> > > > Author: Dan Williams <[email protected]>
> >> > > > Date: Thu Mar 22 17:05:11 2012 -0700
> >> > > >
> >> > > > [SCSI] sd: limit the scope of the async probe domain
> >> >
> >> > My theory is that this is an init problem: The assumption in a lot of
> >> > our code is that async_synchronize_full() waits for everything ... even
> >> > the domain specific async schedules, which isn't true.
> >> >
> >> > The code in init that makes this assumption is wait_for_device_probe().
> >> > There's also a fun async_synchronize_full() in init_post() that assumes
> >> > it can free the init memory after, which would fail badly if anything in
> >> > init used an async domain.
> >> >
> >> > So either we fix the assumptions or we can't use domain specific async
> >> > schedules.
> >> >
> >>
> >> Hm, we already have cases of code not trusting the semantics of
> >> wait_for_device_probe(), especially as it relates to async scanning like
> >> in kernel/power/hibernate.c:
> >>
> >> /*
> >> * Some device discovery might still be in progress; we need
> >> * to wait for this to finish.
> >> */
> >> wait_for_device_probe();
> >>
> >> if (resume_wait) {
> >> while ((swsusp_resume_device = name_to_dev_t(resume_file)) == 0)
> >> msleep(10);
> >> async_synchronize_full();
> >> }
> >>
> >> /*
> >> * We can't depend on SCSI devices being available after loading
> >> * one of their modules until scsi_complete_async_scans() is
> >> * called and the resume device usually is a SCSI one.
> >> */
> >> scsi_complete_async_scans();
> >
> > This is actually looks wrong: it works if SCSI is built in, but it's a
> > nop if SCSI is a module (the nop function is gated by the else clause of
> > #ifdef CONFIG_SCSI)
> >
> > Rafael, you added this not via the SCSI tree, is that the intention?
> >
> >> ...so it seems scsi_complete_async_scans() should take care to flush sd
> >> probe actions as well... here is a test patch:
> >>
> >> --- snip ---
> >>
> >> diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
> >> index 8906557..05a92d3 100644
> >> --- a/drivers/scsi/scsi_scan.c
> >> +++ b/drivers/scsi/scsi_scan.c
> >> @@ -141,13 +141,13 @@ struct async_scan_data {
> >> * started scanning after this function was called may or may not have
> >> * finished.
> >> */
> >> -int scsi_complete_async_scans(void)
> >> +static void __scsi_complete_async_scans(void)
> >> {
> >> struct async_scan_data *data;
> >>
> >> do {
> >> if (list_empty(&scanning_hosts))
> >> - return 0;
> >> + return;
> >> /* If we can't get memory immediately, that's OK. Just
> >> * sleep a little. Even if we never get memory, the async
> >> * scans will finish eventually.
> >> @@ -181,6 +181,13 @@ int scsi_complete_async_scans(void)
> >> spin_unlock(&async_scan_lock);
> >>
> >> kfree(data);
> >> +}
> >> +
> >> +int scsi_complete_async_scans(void)
> >> +{
> >> + __scsi_complete_async_scans();
> >> + async_synchronize_full_domain(&scsi_sd_probe_domain);
> >> +
> >> return 0;
> >> }
> >
> > But this still doesn't fix the boot problem, does it? ... unless we want
> > to add a scsi_complete_async_scans() into init/do_mounts.c, which looks
> > like piling one hack on top of another.
>
> I managed to convince myself that one in prepare_namespace() was
> probably not needed because of the late_initcall of
> scsi_complete_async_scans() in the built-in case and in the module
> case the initramfs should be taking care of it.
Ah, now I remember, that was the hack we put in to prevent a boot panic
caused by a similar thing ... mainly because async SCSI scanning uses a
custom infrastructure.
> > I really think the correct fix is to have wait_for_device_probe()
> > actually wait until all probes have completed and everything is
> > discovered, that way we get the semantics the name implies and boot
> > should just work.
> >
>
> ...but wouldn't it need to go something like:
>
> wait_for_device_probe(); /* all pci drivers probed */
> scsi_complete_async_scans(): /* flush host scans */
> wait_for_device_probe(); /* all recently attached sd devices probed */
>
> ?
No .. the point is if we wait for all outstanding scans instead of just
those in the async_running domain, it will "just work", with no special
SCSI magic.
James
On Thursday, May 24, 2012, James Bottomley wrote:
> On Wed, 2012-05-23 at 19:22 -0700, Dan Williams wrote:
> > On Wed, 2012-05-23 at 23:56 +0100, James Bottomley wrote:
> > > On Wed, 2012-05-23 at 14:04 -0400, David Miller wrote:
> > > > From: Meelis Roos <[email protected]>
> > > > Date: Wed, 23 May 2012 19:46:46 +0300 (EEST)
> > > >
> > > > CC:'ing interested parties.
> > > >
> > > > >> > Just tested 3.4.0-02580-g72c04af on about 10 machines. While most of
> > > > >> > them work (including 3 different sparc64 machines with real scsi disks),
> > > > >> > Sun Netra X1 with pata_ali and IDE disk consistently fails to boot. sda
> > > > >> > is recognized but no partitions. 3.3.0 works fine, as did something
> > > > >> > around 3.4-rc7 (plain 3.4 not tested yet). No other IDE machines tested
> > > > >> > yet since I have none with remote console at the moment.
> > > > >>
> > > > >> If 3.4.0-final is OK, start bisecting from v3.4.0 until 72c04af. One
> > > > >> possibility could be the sparc64 NOBOOTMEM conversion that went into
> > > > >> the merge window.
> > > > >
> > > > > Bisecting leads to this commit:
> > > > >
> > > > > a7a20d103994fd760766e6c9d494daa569cbfe06 is the first bad commit
> > > > > commit a7a20d103994fd760766e6c9d494daa569cbfe06
> > > > > Author: Dan Williams <[email protected]>
> > > > > Date: Thu Mar 22 17:05:11 2012 -0700
> > > > >
> > > > > [SCSI] sd: limit the scope of the async probe domain
> > >
> > > My theory is that this is an init problem: The assumption in a lot of
> > > our code is that async_synchronize_full() waits for everything ... even
> > > the domain specific async schedules, which isn't true.
> > >
> > > The code in init that makes this assumption is wait_for_device_probe().
> > > There's also a fun async_synchronize_full() in init_post() that assumes
> > > it can free the init memory after, which would fail badly if anything in
> > > init used an async domain.
> > >
> > > So either we fix the assumptions or we can't use domain specific async
> > > schedules.
> > >
> >
> > Hm, we already have cases of code not trusting the semantics of
> > wait_for_device_probe(), especially as it relates to async scanning like
> > in kernel/power/hibernate.c:
> >
> > /*
> > * Some device discovery might still be in progress; we need
> > * to wait for this to finish.
> > */
> > wait_for_device_probe();
> >
> > if (resume_wait) {
> > while ((swsusp_resume_device = name_to_dev_t(resume_file)) == 0)
> > msleep(10);
> > async_synchronize_full();
> > }
> >
> > /*
> > * We can't depend on SCSI devices being available after loading
> > * one of their modules until scsi_complete_async_scans() is
> > * called and the resume device usually is a SCSI one.
> > */
> > scsi_complete_async_scans();
>
> This is actually looks wrong: it works if SCSI is built in, but it's a
> nop if SCSI is a module (the nop function is gated by the else clause of
> #ifdef CONFIG_SCSI)
>
> Rafael, you added this not via the SCSI tree,
That's correct, it was committed directly by Linus.
> is that the intention?
Pretty much it is.
The code snippet is slightly out of context and it is a part of the
software_resume() routine, which is only called when the kernel's built-in
image reading code checks whether or not the image is present. It won't
work anyway if SCSI is not built in.
Thanks,
Rafael
On Thu, 2012-05-24 at 21:52 +0200, Rafael J. Wysocki wrote:
> On Thursday, May 24, 2012, James Bottomley wrote:
> > On Wed, 2012-05-23 at 19:22 -0700, Dan Williams wrote:
> > > On Wed, 2012-05-23 at 23:56 +0100, James Bottomley wrote:
> > > > On Wed, 2012-05-23 at 14:04 -0400, David Miller wrote:
> > > > > From: Meelis Roos <[email protected]>
> > > > > Date: Wed, 23 May 2012 19:46:46 +0300 (EEST)
> > > > >
> > > > > CC:'ing interested parties.
> > > > >
> > > > > >> > Just tested 3.4.0-02580-g72c04af on about 10 machines. While most of
> > > > > >> > them work (including 3 different sparc64 machines with real scsi disks),
> > > > > >> > Sun Netra X1 with pata_ali and IDE disk consistently fails to boot. sda
> > > > > >> > is recognized but no partitions. 3.3.0 works fine, as did something
> > > > > >> > around 3.4-rc7 (plain 3.4 not tested yet). No other IDE machines tested
> > > > > >> > yet since I have none with remote console at the moment.
> > > > > >>
> > > > > >> If 3.4.0-final is OK, start bisecting from v3.4.0 until 72c04af. One
> > > > > >> possibility could be the sparc64 NOBOOTMEM conversion that went into
> > > > > >> the merge window.
> > > > > >
> > > > > > Bisecting leads to this commit:
> > > > > >
> > > > > > a7a20d103994fd760766e6c9d494daa569cbfe06 is the first bad commit
> > > > > > commit a7a20d103994fd760766e6c9d494daa569cbfe06
> > > > > > Author: Dan Williams <[email protected]>
> > > > > > Date: Thu Mar 22 17:05:11 2012 -0700
> > > > > >
> > > > > > [SCSI] sd: limit the scope of the async probe domain
> > > >
> > > > My theory is that this is an init problem: The assumption in a lot of
> > > > our code is that async_synchronize_full() waits for everything ... even
> > > > the domain specific async schedules, which isn't true.
> > > >
> > > > The code in init that makes this assumption is wait_for_device_probe().
> > > > There's also a fun async_synchronize_full() in init_post() that assumes
> > > > it can free the init memory after, which would fail badly if anything in
> > > > init used an async domain.
> > > >
> > > > So either we fix the assumptions or we can't use domain specific async
> > > > schedules.
> > > >
> > >
> > > Hm, we already have cases of code not trusting the semantics of
> > > wait_for_device_probe(), especially as it relates to async scanning like
> > > in kernel/power/hibernate.c:
> > >
> > > /*
> > > * Some device discovery might still be in progress; we need
> > > * to wait for this to finish.
> > > */
> > > wait_for_device_probe();
> > >
> > > if (resume_wait) {
> > > while ((swsusp_resume_device = name_to_dev_t(resume_file)) == 0)
> > > msleep(10);
> > > async_synchronize_full();
> > > }
> > >
> > > /*
> > > * We can't depend on SCSI devices being available after loading
> > > * one of their modules until scsi_complete_async_scans() is
> > > * called and the resume device usually is a SCSI one.
> > > */
> > > scsi_complete_async_scans();
> >
> > This is actually looks wrong: it works if SCSI is built in, but it's a
> > nop if SCSI is a module (the nop function is gated by the else clause of
> > #ifdef CONFIG_SCSI)
> >
> > Rafael, you added this not via the SCSI tree,
>
> That's correct, it was committed directly by Linus.
>
> > is that the intention?
>
> Pretty much it is.
>
> The code snippet is slightly out of context and it is a part of the
> software_resume() routine, which is only called when the kernel's built-in
> image reading code checks whether or not the image is present. It won't
> work anyway if SCSI is not built in.
I don't understand this.
Why would it make a difference whether SCSI is modular at hybernation
resume time? The reason it makes a difference at boot time is because
there's no initrd to wait for the scans and mount the root if we're not
modular, so the init path has to do it. However, when resuming an
image, the module is already loaded into that image, so there should be
no difference at all between steps taken in the modular and non-modular
cases.
James
> ...so it seems scsi_complete_async_scans() should take care to flush sd
> probe actions as well... here is a test patch:
Just finished testing it against 3.4.0-05722-gf936991. Without the
patch, this version fails to boot and with it, it boots fine. Now going
to test your 4-patch series.
--
Meelis Roos ([email protected])
On Fri, 25 May 2012, James Bottomley wrote:
> > > This is actually looks wrong: it works if SCSI is built in, but it's a
> > > nop if SCSI is a module (the nop function is gated by the else clause of
> > > #ifdef CONFIG_SCSI)
> > >
> > > Rafael, you added this not via the SCSI tree,
> >
> > That's correct, it was committed directly by Linus.
> >
> > > is that the intention?
> >
> > Pretty much it is.
> >
> > The code snippet is slightly out of context and it is a part of the
> > software_resume() routine, which is only called when the kernel's built-in
> > image reading code checks whether or not the image is present. It won't
> > work anyway if SCSI is not built in.
>
> I don't understand this.
>
> Why would it make a difference whether SCSI is modular at hybernation
> resume time? The reason it makes a difference at boot time is because
> there's no initrd to wait for the scans and mount the root if we're not
> modular, so the init path has to do it. However, when resuming an
> image, the module is already loaded into that image, so there should be
> no difference at all between steps taken in the modular and non-modular
> cases.
I think Rafael is referring to the boot kernel -- the one that reads in
the hibernation image initially. Whether or not the boot kernel can
have modular drivers isn't clear to me; I don't know when the check for
a valid image in the swap area is carried out in relation to starting
up the initramfs task.
Alan Stern
On Friday, May 25, 2012, Alan Stern wrote:
> On Fri, 25 May 2012, James Bottomley wrote:
>
> > > > This is actually looks wrong: it works if SCSI is built in, but it's a
> > > > nop if SCSI is a module (the nop function is gated by the else clause of
> > > > #ifdef CONFIG_SCSI)
> > > >
> > > > Rafael, you added this not via the SCSI tree,
> > >
> > > That's correct, it was committed directly by Linus.
> > >
> > > > is that the intention?
> > >
> > > Pretty much it is.
> > >
> > > The code snippet is slightly out of context and it is a part of the
> > > software_resume() routine, which is only called when the kernel's built-in
> > > image reading code checks whether or not the image is present. It won't
> > > work anyway if SCSI is not built in.
> >
> > I don't understand this.
> >
> > Why would it make a difference whether SCSI is modular at hybernation
> > resume time? The reason it makes a difference at boot time is because
> > there's no initrd to wait for the scans and mount the root if we're not
> > modular, so the init path has to do it. However, when resuming an
> > image, the module is already loaded into that image, so there should be
> > no difference at all between steps taken in the modular and non-modular
> > cases.
>
> I think Rafael is referring to the boot kernel -- the one that reads in
> the hibernation image initially.
That's correct.
> Whether or not the boot kernel can have modular drivers isn't clear to me;
It can, but then the code in question is irrelevant and the resume has to
be triggered in a different way. For example, by writing to
/sys/power/resume from the initrd boot scripts.
> I don't know when the check for a valid image in the swap area is carried
> out in relation to starting up the initramfs task.
This particular one is carried out before the initrd is loaded.
Thanks,
Rafael
On Fri, 25 May 2012, Rafael J. Wysocki wrote:
> On Friday, May 25, 2012, Alan Stern wrote:
> > On Fri, 25 May 2012, James Bottomley wrote:
> >
> > Whether or not the boot kernel can have modular drivers isn't clear to me;
>
> It can, but then the code in question is irrelevant and the resume has to
> be triggered in a different way. For example, by writing to
> /sys/power/resume from the initrd boot scripts.
>
> > I don't know when the check for a valid image in the swap area is carried
> > out in relation to starting up the initramfs task.
>
> This particular one is carried out before the initrd is loaded.
I just got hit by this one too, but on x86 qemu. There's no initrd, and all
the modules are built in.
With commit a7a20d103994fd760766e6c9d494daa569cbfe06 the kernel doesn't
get to the point where it reads the partition table.
If it's of any help, I can provide more details.
Eldad
On Mon, May 28, 2012 at 9:46 AM, Eldad Zack <[email protected]> wrote:
>
> On Fri, 25 May 2012, Rafael J. Wysocki wrote:
>> On Friday, May 25, 2012, Alan Stern wrote:
>> > On Fri, 25 May 2012, James Bottomley wrote:
>> >
>> > Whether or not the boot kernel can have modular drivers isn't clear to me;
>>
>> It can, but then the code in question is irrelevant and the resume has to
>> be triggered in a different way. ?For example, by writing to
>> /sys/power/resume from the initrd boot scripts.
>>
>> > I don't know when the check for a valid image in the swap area is carried
>> > out in relation to starting up the initramfs task.
>>
>> This particular one is carried out before the initrd is loaded.
>
> I just got hit by this one too, but on x86 qemu. There's no initrd, and all
> the modules are built in.
>
> With commit a7a20d103994fd760766e6c9d494daa569cbfe06 the kernel doesn't
> get to the point where it reads the partition table.
>
> If it's of any help, I can provide more details.
Yes, please send the qemu config details.
The proposed fix for 3.5 is here:
http://marc.info/?l=linux-scsi&m=133796775807498&w=2
--
Dan
On Mon, 28 May 2012, Dan Williams wrote:
> On Mon, May 28, 2012 at 9:46 AM, Eldad Zack <[email protected]> wrote:
> > On Fri, 25 May 2012, Rafael J. Wysocki wrote:
> >> On Friday, May 25, 2012, Alan Stern wrote:
> >> > On Fri, 25 May 2012, James Bottomley wrote:
> >> >
> >> > Whether or not the boot kernel can have modular drivers isn't clear to me;
> >>
> >> It can, but then the code in question is irrelevant and the resume has to
> >> be triggered in a different way. ?For example, by writing to
> >> /sys/power/resume from the initrd boot scripts.
> >>
> >> > I don't know when the check for a valid image in the swap area is carried
> >> > out in relation to starting up the initramfs task.
> >>
> >> This particular one is carried out before the initrd is loaded.
> >
> > I just got hit by this one too, but on x86 qemu. There's no initrd, and all
> > the modules are built in.
> >
> > With commit a7a20d103994fd760766e6c9d494daa569cbfe06 the kernel doesn't
> > get to the point where it reads the partition table.
> >
> > If it's of any help, I can provide more details.
>
> Yes, please send the qemu config details.
Inline below. I've also included some more info before that just in
case.
> The proposed fix for 3.5 is here:
> http://marc.info/?l=linux-scsi&m=133796775807498&w=2
I can verify that it works with my setup as well, thanks for the fix!
Eldad
---
QEMU runs with:
qemu-system-i386 -m 32 -hda output/images/rootfs.ext2 -kernel output/images/bzImage -append "root=/dev/sda console=ttyS0,115200n8" -nographic -net nic -net tap
Version string:
QEMU emulator version 1.0,1 (Debian 1.0.1+dfsg-1), Copyright (c) 2003-2008 Fabrice Bellard
The whole "disk" is not partitioned, as you can guess from the filename.
(bad)
ata2.00: configured for MWDMA2
ata1.00: ATA-7: QEMU HARDDISK, 1.0,1, max UDMA/100
ata1.00: 8686 sectors, multi 16: LBA48
ata1.00: configured for MWDMA2
scsi 0:0:0:0: Direct-Access ATA QEMU HARDDISK 1.0, PQ: 0 ANSI: 5
scsi 1:0:0:0: CD-ROM QEMU QEMU DVD-ROM 1.0, PQ: 0 ANSI: 5
VFS: Cannot open root device "sda" or unknown-block(0,0): error -6
Please append a correct "root=" boot option; here are the available partitions:
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
Pid: 1, comm: swapper Not tainted 3.4.0+ #1
Call Trace:
[<c12449f4>] panic+0x6e/0x158
[<c12fdd8f>] mount_block_root+0x1ae/0x23b
[<c1002930>] ? sys_rt_sigreturn+0x40/0xb0
[<c1089678>] ? sys_mknod+0x28/0x30
[<c12fde75>] mount_root+0x59/0x5f
[<c12fdf8c>] prepare_namespace+0x111/0x14b
[<c107d290>] ? sys_access+0x20/0x30
[<c12fdb1e>] kernel_init+0x194/0x1a3
[<c12fd369>] ? loglevel+0x2b/0x2b
[<c12fd98a>] ? do_one_initcall+0x133/0x133
[<c1247056>] kernel_thread_helper+0x6/0xd
QEMU: Terminated
(good)
ata2.00: configured for MWDMA2
ata1.00: ATA-7: QEMU HARDDISK, 1.0,1, max UDMA/100
ata1.00: 8686 sectors, multi 16: LBA48
ata1.00: configured for MWDMA2
scsi 0:0:0:0: Direct-Access ATA QEMU HARDDISK 1.0, PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 8686 512-byte logical blocks: (4.44 MB/4.24 MiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sda: unknown partition table
sd 0:0:0:0: [sda] Attached SCSI disk
scsi 1:0:0:0: CD-ROM QEMU QEMU DVD-ROM 1.0, PQ: 0 ANSI: 5
---
.config:
(HEAD b48b2c3e50433ff6f7e46186daa7f986bd960215)
Cross-compiled to i686.
#
# Automatically generated file; DO NOT EDIT.
# Linux/i386 3.4.0 Kernel Configuration
#
# CONFIG_64BIT is not set
CONFIG_X86_32=y
# CONFIG_X86_64 is not set
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf32-i386"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_MMU=y
# CONFIG_NEED_DMA_MAP_STATE is not set
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_ARCH_HAS_CPU_AUTOPROBE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_ZONE_DMA32 is not set
# CONFIG_AUDIT_ARCH is not set
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_X86_32_LAZY_GS=y
CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-ecx -fcall-saved-edx"
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_HAVE_IRQ_WORK=y
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_EXTABLE_SORT=y
#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
# CONFIG_SWAP is not set
# CONFIG_SYSVIPC is not set
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_FHANDLE is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
CONFIG_HAVE_GENERIC_HARDIRQS=y
#
# IRQ subsystem
#
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_KTIME_SCALAR=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_GENERIC_CMOS_UPDATE=y
#
# Timers subsystem
#
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
#
# RCU Subsystem
#
CONFIG_TINY_RCU=y
# CONFIG_PREEMPT_RCU is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=17
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
# CONFIG_CGROUPS is not set
# CONFIG_CHECKPOINT_RESTORE is not set
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
# CONFIG_SCHED_AUTOGROUP is not set
# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_RELAY is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
# CONFIG_EXPERT is not set
CONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_PROFILING is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_OPROFILE_NMI_TIMER=y
# CONFIG_JUMP_LABEL is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_BSGLIB is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
# CONFIG_INLINE_SPIN_TRYLOCK is not set
# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK is not set
# CONFIG_INLINE_SPIN_LOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_READ_TRYLOCK is not set
# CONFIG_INLINE_READ_LOCK is not set
# CONFIG_INLINE_READ_LOCK_BH is not set
# CONFIG_INLINE_READ_LOCK_IRQ is not set
# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
CONFIG_INLINE_READ_UNLOCK=y
# CONFIG_INLINE_READ_UNLOCK_BH is not set
CONFIG_INLINE_READ_UNLOCK_IRQ=y
# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_WRITE_TRYLOCK is not set
# CONFIG_INLINE_WRITE_LOCK is not set
# CONFIG_INLINE_WRITE_LOCK_BH is not set
# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
CONFIG_INLINE_WRITE_UNLOCK=y
# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
# CONFIG_MUTEX_SPIN_ON_OWNER is not set
CONFIG_FREEZER=y
#
# Processor type and features
#
CONFIG_ZONE_DMA=y
# CONFIG_SMP is not set
# CONFIG_X86_EXTENDED_PLATFORM is not set
# CONFIG_X86_32_IRIS is not set
# CONFIG_SCHED_OMIT_FRAME_POINTER is not set
# CONFIG_PARAVIRT_GUEST is not set
CONFIG_NO_BOOTMEM=y
# CONFIG_MEMTEST is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
CONFIG_M686=y
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MELAN is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_INTERNODE_CACHE_SHIFT=5
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=5
CONFIG_X86_XADD=y
# CONFIG_X86_PPRO_FENCE is not set
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=5
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_CPU_SUP_TRANSMETA_32=y
# CONFIG_HPET_TIMER is not set
CONFIG_DMI=y
# CONFIG_IOMMU_HELPER is not set
CONFIG_NR_CPUS=1
# CONFIG_IRQ_TIME_ACCOUNTING is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
# CONFIG_X86_UP_APIC is not set
# CONFIG_X86_MCE is not set
CONFIG_VM86=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_X86_REBOOTFIXUPS is not set
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set
# CONFIG_NOHIGHMEM is not set
CONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_HIGHMEM=y
# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
# CONFIG_ARCH_DMA_ADDR_T_64BIT is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ILLEGAL_POINTER_VALUE=0
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_COMPACTION is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
# CONFIG_TRANSPARENT_HUGEPAGE is not set
CONFIG_NEED_PER_CPU_KM=y
# CONFIG_CLEANCACHE is not set
# CONFIG_HIGHPTE is not set
# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
CONFIG_X86_RESERVE_LOW=64
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
# CONFIG_MTRR_SANITIZER is not set
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
CONFIG_ARCH_RANDOM=y
# CONFIG_EFI is not set
# CONFIG_SECCOMP is not set
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
# CONFIG_SCHED_HRTICK is not set
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x1000000
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_ALIGN=0x1000000
CONFIG_COMPAT_VDSO=y
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
#
# Power management and ACPI options
#
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_PM_SLEEP=y
# CONFIG_PM_AUTOSLEEP is not set
# CONFIG_PM_WAKELOCKS is not set
# CONFIG_PM_RUNTIME is not set
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
# CONFIG_ACPI_PROCFS is not set
# CONFIG_ACPI_PROCFS_POWER is not set
# CONFIG_ACPI_EC_DEBUGFS is not set
CONFIG_ACPI_PROC_EVENT=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_FAN=y
# CONFIG_ACPI_DOCK is not set
CONFIG_ACPI_PROCESSOR=y
# CONFIG_ACPI_PROCESSOR_AGGREGATOR is not set
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
# CONFIG_ACPI_PCI_SLOT is not set
CONFIG_X86_PM_TIMER=y
# CONFIG_ACPI_CONTAINER is not set
# CONFIG_ACPI_SBS is not set
# CONFIG_ACPI_HED is not set
# CONFIG_ACPI_CUSTOM_METHOD is not set
# CONFIG_ACPI_BGRT is not set
# CONFIG_ACPI_APEI is not set
# CONFIG_SFI is not set
# CONFIG_APM is not set
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
# CONFIG_INTEL_IDLE is not set
#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCI_CNB20LE_QUIRK is not set
# CONFIG_PCIEPORTBUS is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
# CONFIG_PCI_PRI is not set
# CONFIG_PCI_PASID is not set
# CONFIG_PCI_IOAPIC is not set
CONFIG_PCI_LABEL=y
CONFIG_ISA_DMA_API=y
# CONFIG_ISA is not set
# CONFIG_SCx200 is not set
# CONFIG_OLPC is not set
# CONFIG_ALIX is not set
# CONFIG_NET5501 is not set
# CONFIG_GEOS is not set
CONFIG_AMD_NB=y
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_RAPIDIO is not set
#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_HAVE_AOUT=y
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set
CONFIG_HAVE_ATOMIC_IOMAP=y
CONFIG_HAVE_TEXT_POKE_SMP=y
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_UNIX=y
# CONFIG_UNIX_DIAG is not set
# CONFIG_XFRM_USER is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_PNP=y
# CONFIG_IP_PNP_DHCP is not set
# CONFIG_IP_PNP_BOOTP is not set
# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE_DEMUX is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
CONFIG_INET_TUNNEL=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
CONFIG_IPV6=y
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
CONFIG_IPV6_OPTIMISTIC_DAD=y
# CONFIG_INET6_AH is not set
# CONFIG_INET6_ESP is not set
# CONFIG_INET6_IPCOMP is not set
# CONFIG_IPV6_MIP6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
# CONFIG_INET6_XFRM_MODE_BEET is not set
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=y
CONFIG_IPV6_SIT_6RD=y
CONFIG_IPV6_NDISC_NODETYPE=y
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_IPV6_MROUTE is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_L2TP is not set
CONFIG_STP=y
CONFIG_BRIDGE=y
CONFIG_BRIDGE_IGMP_SNOOPING=y
# CONFIG_NET_DSA is not set
CONFIG_VLAN_8021Q=y
# CONFIG_VLAN_8021Q_GVRP is not set
# CONFIG_DECNET is not set
CONFIG_LLC=y
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_BATMAN_ADV is not set
# CONFIG_OPENVSWITCH is not set
CONFIG_BQL=y
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
# CONFIG_WIRELESS is not set
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_CAIF is not set
# CONFIG_CEPH_LIB is not set
# CONFIG_NFC is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH=""
# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
CONFIG_FW_LOADER=y
# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_GENERIC_CPU_DEVICES is not set
# CONFIG_DMA_SHARED_BUFFER is not set
# CONFIG_CMA is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
# CONFIG_PARPORT is not set
CONFIG_PNP=y
CONFIG_PNP_DEBUG_MESSAGES=y
#
# Protocols
#
CONFIG_PNPACPI=y
# CONFIG_BLK_DEV is not set
#
# Misc devices
#
# CONFIG_SENSORS_LIS3LV02D is not set
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
# CONFIG_INTEL_MID_PTI is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_VMWARE_BALLOON is not set
# CONFIG_PCH_PHUB is not set
# CONFIG_C2PORT is not set
#
# EEPROM support
#
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_CB710_CORE is not set
#
# Texas Instruments shared transport line discipline
#
#
# Altera FPGA firmware download module
#
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_ISCSI_BOOT_SYSFS is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_SCSI_CXGB4_ISCSI is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_SCSI_BNX2X_FCOE is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_MVUMI is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_UFSHCD is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_VMWARE_PVSCSI is not set
# CONFIG_LIBFC is not set
# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_FCOE_FNIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_ISCI is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_ACPI=y
CONFIG_SATA_PMP=y
#
# Controllers with non-SFF native interface
#
# CONFIG_SATA_AHCI is not set
# CONFIG_SATA_AHCI_PLATFORM is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_SATA_ACARD_AHCI is not set
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y
#
# SFF controllers with custom DMA interface
#
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_SX4 is not set
CONFIG_ATA_BMDMA=y
#
# SATA SFF controllers with BMDMA
#
CONFIG_ATA_PIIX=y
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_SVW is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
#
# PATA SFF controllers with BMDMA
#
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CS5535 is not set
# CONFIG_PATA_CS5536 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SCH is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
#
# PIO-only SFF controllers
#
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_RZ1000 is not set
#
# Generic fallback / legacy drivers
#
# CONFIG_PATA_ACPI is not set
# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_LEGACY is not set
# CONFIG_MD is not set
# CONFIG_TARGET_CORE is not set
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
# CONFIG_FIREWIRE_NOSY is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
CONFIG_NET_CORE=y
# CONFIG_BONDING is not set
# CONFIG_DUMMY is not set
# CONFIG_EQUALIZER is not set
# CONFIG_NET_FC is not set
# CONFIG_MII is not set
# CONFIG_NET_TEAM is not set
# CONFIG_MACVLAN is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
# CONFIG_ARCNET is not set
#
# CAIF transport drivers
#
CONFIG_ETHERNET=y
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_VENDOR_ADAPTEC is not set
# CONFIG_NET_VENDOR_ALTEON is not set
# CONFIG_NET_VENDOR_AMD is not set
# CONFIG_NET_VENDOR_ATHEROS is not set
# CONFIG_NET_VENDOR_BROADCOM is not set
# CONFIG_NET_VENDOR_BROCADE is not set
# CONFIG_NET_CALXEDA_XGMAC is not set
# CONFIG_NET_VENDOR_CHELSIO is not set
# CONFIG_NET_VENDOR_CISCO is not set
# CONFIG_DNET is not set
# CONFIG_NET_VENDOR_DEC is not set
# CONFIG_NET_VENDOR_DLINK is not set
# CONFIG_NET_VENDOR_EMULEX is not set
# CONFIG_NET_VENDOR_EXAR is not set
# CONFIG_NET_VENDOR_HP is not set
CONFIG_NET_VENDOR_INTEL=y
# CONFIG_E100 is not set
CONFIG_E1000=y
# CONFIG_E1000E is not set
# CONFIG_IGB is not set
# CONFIG_IGBVF is not set
# CONFIG_IXGB is not set
# CONFIG_IXGBE is not set
# CONFIG_NET_VENDOR_I825XX is not set
# CONFIG_IP1000 is not set
# CONFIG_JME is not set
# CONFIG_NET_VENDOR_MARVELL is not set
# CONFIG_NET_VENDOR_MELLANOX is not set
# CONFIG_NET_VENDOR_MICREL is not set
# CONFIG_NET_VENDOR_MYRI is not set
# CONFIG_FEALNX is not set
# CONFIG_NET_VENDOR_NATSEMI is not set
# CONFIG_NET_VENDOR_NVIDIA is not set
# CONFIG_NET_VENDOR_OKI is not set
# CONFIG_ETHOC is not set
# CONFIG_NET_PACKET_ENGINE is not set
# CONFIG_NET_VENDOR_QLOGIC is not set
# CONFIG_NET_VENDOR_REALTEK is not set
# CONFIG_NET_VENDOR_RDC is not set
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_SILAN is not set
# CONFIG_NET_VENDOR_SIS is not set
# CONFIG_SFC is not set
# CONFIG_NET_VENDOR_SMSC is not set
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_SUN is not set
# CONFIG_NET_VENDOR_TEHUTI is not set
# CONFIG_NET_VENDOR_TI is not set
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_NET_SB1000 is not set
# CONFIG_PHYLIB is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_WLAN is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
# CONFIG_WAN is not set
# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
# CONFIG_INPUT_SPARSEKMAP is not set
# CONFIG_INPUT_MATRIXKMAP is not set
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_OMAP4 is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_SERIO_PS2MULT is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_VT_CONSOLE_SLEEP=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
# CONFIG_N_GSM is not set
# CONFIG_TRACE_SINK is not set
# CONFIG_DEVKMEM is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MFD_HSU is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_PCH_UART is not set
# CONFIG_SERIAL_XILINX_PS_UART is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
# CONFIG_NSC_GPIO is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HPET is not set
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
# CONFIG_SPI is not set
# CONFIG_HSI is not set
#
# PPS support
#
# CONFIG_PPS is not set
#
# PPS generators support
#
#
# PTP clock support
#
#
# Enable Device Drivers -> PPS to see the PTP clock options.
#
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_TEST_POWER is not set
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_DS2781 is not set
# CONFIG_BATTERY_BQ27x00 is not set
# CONFIG_CHARGER_MAX8903 is not set
# CONFIG_HWMON is not set
CONFIG_THERMAL=y
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
CONFIG_BCMA_POSSIBLE=y
#
# Broadcom specific AMBA
#
# CONFIG_BCMA is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_ABX500_CORE is not set
# CONFIG_MFD_CS5535 is not set
# CONFIG_LPC_SCH is not set
# CONFIG_MFD_RDC321X is not set
# CONFIG_MFD_JANZ_CMODIO is not set
# CONFIG_MFD_VX855 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
# CONFIG_AGP is not set
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=1
# CONFIG_VGA_SWITCHEROO is not set
# CONFIG_DRM is not set
# CONFIG_STUB_POULSBO is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_FB is not set
# CONFIG_EXYNOS_VIDEO is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_DUMMY_CONSOLE=y
# CONFIG_SOUND is not set
# CONFIG_HID_SUPPORT is not set
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB_ARCH_HAS_XHCI=y
# CONFIG_USB_SUPPORT is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
#
# Virtio drivers
#
# CONFIG_VIRTIO_PCI is not set
# CONFIG_VIRTIO_BALLOON is not set
# CONFIG_VIRTIO_MMIO is not set
#
# Microsoft Hyper-V guest support
#
# CONFIG_HYPERV is not set
# CONFIG_STAGING is not set
# CONFIG_X86_PLATFORM_DEVICES is not set
#
# Hardware Spinlock drivers
#
CONFIG_CLKSRC_I8253=y
CONFIG_CLKEVT_I8253=y
CONFIG_I8253_LOCK=y
CONFIG_CLKBLD_I8253=y
CONFIG_IOMMU_SUPPORT=y
#
# Remoteproc drivers (EXPERIMENTAL)
#
#
# Rpmsg drivers (EXPERIMENTAL)
#
# CONFIG_VIRT_DRIVERS is not set
# CONFIG_PM_DEVFREQ is not set
# CONFIG_EXTCON is not set
# CONFIG_MEMORY is not set
# CONFIG_IIO is not set
# CONFIG_VME_BUS is not set
#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_FIRMWARE_MEMMAP=y
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
# CONFIG_DMIID is not set
# CONFIG_DMI_SYSFS is not set
# CONFIG_ISCSI_IBFT_FIND is not set
# CONFIG_GOOGLE_FIRMWARE is not set
#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
# CONFIG_EXT4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not set
# CONFIG_FS_POSIX_ACL is not set
CONFIG_FILE_LOCKING=y
# CONFIG_FSNOTIFY is not set
# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY_USER is not set
# CONFIG_FANOTIFY is not set
# CONFIG_QUOTA is not set
# CONFIG_QUOTACTL is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
#
# Caches
#
# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
# CONFIG_MSDOS_FS is not set
# CONFIG_VFAT_FS is not set
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
# CONFIG_TMPFS is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
# CONFIG_MISC_FILESYSTEMS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf-8"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_READABLE_ASM is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_SECTION_MISMATCH is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
# CONFIG_LOCKUP_DETECTOR is not set
# CONFIG_HARDLOCKUP_DETECTOR is not set
# CONFIG_DETECT_HUNG_TASK is not set
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
CONFIG_DEBUG_OBJECTS=y
# CONFIG_DEBUG_OBJECTS_SELFTEST is not set
# CONFIG_DEBUG_OBJECTS_FREE is not set
# CONFIG_DEBUG_OBJECTS_TIMERS is not set
# CONFIG_DEBUG_OBJECTS_WORK is not set
# CONFIG_DEBUG_OBJECTS_RCU_HEAD is not set
# CONFIG_DEBUG_OBJECTS_PERCPU_COUNTER is not set
CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
CONFIG_DEBUG_KMEMLEAK=y
CONFIG_DEBUG_KMEMLEAK_EARLY_LOG_SIZE=400
# CONFIG_DEBUG_KMEMLEAK_DEFAULT_OFF is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_SPARSE_RCU_POINTER is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_ATOMIC_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_DEBUG_KOBJECT=y
# CONFIG_DEBUG_HIGHMEM is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_INFO_REDUCED is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_VIRTUAL is not set
# CONFIG_DEBUG_WRITECOUNT is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_TEST_LIST_SORT is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_TRACE is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_HAVE_ARCH_KMEMCHECK=y
# CONFIG_KMEMCHECK is not set
# CONFIG_TEST_KSTRTOX is not set
# CONFIG_STRICT_DEVMEM is not set
# CONFIG_X86_VERBOSE_BOOTUP is not set
CONFIG_EARLY_PRINTK=y
# CONFIG_EARLY_PRINTK_DBGP is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_X86_PTDUMP is not set
CONFIG_DEBUG_RODATA=y
CONFIG_DEBUG_RODATA_TEST=y
CONFIG_DOUBLEFAULT=y
# CONFIG_IOMMU_STRESS is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
# CONFIG_DEBUG_BOOT_PARAMS is not set
# CONFIG_CPA_DEBUG is not set
# CONFIG_OPTIMIZE_INLINING is not set
# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
# CONFIG_CRYPTO is not set
CONFIG_HAVE_KVM=y
# CONFIG_VIRTUALIZATION is not set
# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_IO=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
# CONFIG_CRC8 is not set
# CONFIG_XZ_DEC is not set
# CONFIG_XZ_DEC_BCJ is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_DQL=y
CONFIG_NLATTR=y
# CONFIG_AVERAGE is not set
# CONFIG_CORDIC is not set
# CONFIG_DDR is not set