From: Cliff Wickman <[email protected]>
The SGI Altix UV2 BAU (Broadcast Assist Unit) as used for tlb-shootdown
(selective broadcast mode) always uses UV2 broadcast descriptor format.
There is no need to clear the 'legacy' (UV1) mode, because the hardware
always uses UV2 mode for selective broadcast.
But the BIOS uses general broadcast and legacy mode, and the hardware
pays attention to the legacy mode bit for general broadcast.
So the kernel must not clear that mode bit.
Signed-off-by: Cliff Wickman <[email protected]>
---
arch/x86/include/asm/uv/uv_bau.h | 1 -
arch/x86/platform/uv/tlb_uv.c | 1 -
2 files changed, 2 deletions(-)
Index: linus.current/arch/x86/include/asm/uv/uv_bau.h
===================================================================
--- linus.current.orig/arch/x86/include/asm/uv/uv_bau.h
+++ linus.current/arch/x86/include/asm/uv/uv_bau.h
@@ -149,7 +149,6 @@
/* 4 bits of software ack period */
#define UV2_ACK_MASK 0x7UL
#define UV2_ACK_UNITS_SHFT 3
-#define UV2_LEG_SHFT UV2H_LB_BAU_MISC_CONTROL_USE_LEGACY_DESCRIPTOR_FORMATS_SHFT
#define UV2_EXT_SHFT UV2H_LB_BAU_MISC_CONTROL_ENABLE_EXTENDED_SB_STATUS_SHFT
/*
Index: linus.current/arch/x86/platform/uv/tlb_uv.c
===================================================================
--- linus.current.orig/arch/x86/platform/uv/tlb_uv.c
+++ linus.current/arch/x86/platform/uv/tlb_uv.c
@@ -1295,7 +1295,6 @@ static void __init enable_timeouts(void)
*/
mmr_image |= (1L << SOFTACK_MSHIFT);
if (is_uv2_hub()) {
- mmr_image &= ~(1L << UV2_LEG_SHFT);
mmr_image |= (1L << UV2_EXT_SHFT);
}
write_mmr_misc_control(pnode, mmr_image);
Commit-ID: d5d2d2eea84b0d8450b082edbc3dbde41fb8bfd8
Gitweb: http://git.kernel.org/tip/d5d2d2eea84b0d8450b082edbc3dbde41fb8bfd8
Author: Cliff Wickman <[email protected]>
AuthorDate: Thu, 7 Jun 2012 08:31:40 -0500
Committer: Ingo Molnar <[email protected]>
CommitDate: Fri, 8 Jun 2012 11:48:28 +0200
x86/uv: Fix UV2 BAU legacy mode
The SGI Altix UV2 BAU (Broadcast Assist Unit) as used for
tlb-shootdown (selective broadcast mode) always uses UV2
broadcast descriptor format. There is no need to clear the
'legacy' (UV1) mode, because the hardware always uses UV2 mode
for selective broadcast.
But the BIOS uses general broadcast and legacy mode, and the
hardware pays attention to the legacy mode bit for general
broadcast. So the kernel must not clear that mode bit.
Signed-off-by: Cliff Wickman <[email protected]>
Cc: <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
---
arch/x86/include/asm/uv/uv_bau.h | 1 -
arch/x86/platform/uv/tlb_uv.c | 1 -
2 files changed, 0 insertions(+), 2 deletions(-)
diff --git a/arch/x86/include/asm/uv/uv_bau.h b/arch/x86/include/asm/uv/uv_bau.h
index becf47b..6149b47 100644
--- a/arch/x86/include/asm/uv/uv_bau.h
+++ b/arch/x86/include/asm/uv/uv_bau.h
@@ -149,7 +149,6 @@
/* 4 bits of software ack period */
#define UV2_ACK_MASK 0x7UL
#define UV2_ACK_UNITS_SHFT 3
-#define UV2_LEG_SHFT UV2H_LB_BAU_MISC_CONTROL_USE_LEGACY_DESCRIPTOR_FORMATS_SHFT
#define UV2_EXT_SHFT UV2H_LB_BAU_MISC_CONTROL_ENABLE_EXTENDED_SB_STATUS_SHFT
/*
diff --git a/arch/x86/platform/uv/tlb_uv.c b/arch/x86/platform/uv/tlb_uv.c
index 3ae0e61..59880af 100644
--- a/arch/x86/platform/uv/tlb_uv.c
+++ b/arch/x86/platform/uv/tlb_uv.c
@@ -1295,7 +1295,6 @@ static void __init enable_timeouts(void)
*/
mmr_image |= (1L << SOFTACK_MSHIFT);
if (is_uv2_hub()) {
- mmr_image &= ~(1L << UV2_LEG_SHFT);
mmr_image |= (1L << UV2_EXT_SHFT);
}
write_mmr_misc_control(pnode, mmr_image);