The Zynq uses the cortex-a9-gic. This eliminates the need to hardcode
register addresses.
Signed-off-by: Josh Cartwright <[email protected]>
---
arch/arm/boot/dts/zynq-ep107.dts | 8 +++++---
arch/arm/mach-zynq/common.c | 7 ++++++-
arch/arm/mach-zynq/include/mach/zynq_soc.h | 2 --
3 files changed, 11 insertions(+), 6 deletions(-)
diff --git a/arch/arm/boot/dts/zynq-ep107.dts b/arch/arm/boot/dts/zynq-ep107.dts
index 37ca192..7bfff4a 100644
--- a/arch/arm/boot/dts/zynq-ep107.dts
+++ b/arch/arm/boot/dts/zynq-ep107.dts
@@ -36,10 +36,12 @@
ranges;
intc: interrupt-controller@f8f01000 {
+ compatible = "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ #address-cells = <1>;
interrupt-controller;
- compatible = "arm,gic";
- reg = <0xF8F01000 0x1000>;
- #interrupt-cells = <2>;
+ reg = <0xF8F01000 0x1000>,
+ <0xF8F00100 0x100>;
};
uart0: uart@e0000000 {
diff --git a/arch/arm/mach-zynq/common.c b/arch/arm/mach-zynq/common.c
index ab5cfdd..d73963b 100644
--- a/arch/arm/mach-zynq/common.c
+++ b/arch/arm/mach-zynq/common.c
@@ -55,12 +55,17 @@ static void __init xilinx_init_machine(void)
of_platform_bus_probe(NULL, zynq_of_bus_ids, NULL);
}
+static struct of_device_id irq_match[] __initdata = {
+ { .compatible = "arm,cortex-a9-gic", .data = gic_of_init, },
+ { }
+};
+
/**
* xilinx_irq_init() - Interrupt controller initialization for the GIC.
*/
static void __init xilinx_irq_init(void)
{
- gic_init(0, 29, SCU_GIC_DIST_BASE, SCU_GIC_CPU_BASE);
+ of_irq_init(irq_match);
}
/* The minimum devices needed to be mapped before the VM system is up and
diff --git a/arch/arm/mach-zynq/include/mach/zynq_soc.h b/arch/arm/mach-zynq/include/mach/zynq_soc.h
index d0d3f8f..3d1c6a6 100644
--- a/arch/arm/mach-zynq/include/mach/zynq_soc.h
+++ b/arch/arm/mach-zynq/include/mach/zynq_soc.h
@@ -35,8 +35,6 @@
#define TTC0_BASE IOMEM(TTC0_VIRT)
#define SCU_PERIPH_BASE IOMEM(SCU_PERIPH_VIRT)
-#define SCU_GIC_CPU_BASE (SCU_PERIPH_BASE + 0x100)
-#define SCU_GIC_DIST_BASE (SCU_PERIPH_BASE + 0x1000)
#define PL310_L2CC_BASE IOMEM(PL310_L2CC_VIRT)
/*
--
1.8.0