Hi,
Sorry for bothering linux bluetooth developers with my problem, but I was not
able to find any active users list.
I have this device plugged into my workstation:
# dmesg
...
usb 4-1: new full speed USB device using uhci_hcd and address 9
usb 4-1: New USB device found, idVendor=04bf, idProduct=0320
usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 4-1: Product: Turbo Bluetooth Adapter
usb 4-1: Manufacturer: Ezurio
...
# lsusb
...
Bus 004 Device 009: ID 04bf:0320 TDK Corp. Bluetooth Adapter
...
# hciconfig hci0 version
hci0: Type: BR/EDR Bus: USB
BD Address: 00:80:98:97:6A:15 ACL MTU: 384:8 SCO MTU: 64:8
HCI Version: 2.0 (0x3) Revision: 0xa5c
LMP Version: 2.0 (0x3) Subversion: 0xa5c
Manufacturer: Cambridge Silicon Radio (10)
# bccmd chiprev
Chip revision: 0x0026 (BC4-External)
# hciconfig hci0 revision
hci0: Type: BR/EDR Bus: USB
BD Address: 00:80:98:97:6A:15 ACL MTU: 384:8 SCO MTU: 64:8
Unified 21c
Chip version: BlueCore4-External
Max key size: 128 bit
SCO mapping: HCI
# bccmd buildname
Build name: cyt_8unified_fl_bt2.0_21_0510281131_encr128 2005-11-07
#
# dfutool archive /tmp/ezurio.dfu
Available devices with DFU support:
1) Bus 004 Device 002: ID 04bf:0320 Interface 2
Select device (abort with 0): 1
Firmware upload ... 674148 bytes
vclass ~ # dfutool verify /tmp/ezurio.dfu
Filename ezurio.dfu
Filesize 674164
Checksum 0f26e33d
DFU suffix 52 26 20 03 bf 04 00 01 55 46 44 10 3d e3 26 0f
idVendor 04bf
idProduct 0320
bcdDevice 2652
bcdDFU 1.0
ucDfuSignature DFU
bLength 16
dwCRC 0f26e33d
Firmware type CSR-dfu2
Firmware check valid checksum
AFAICT, the device firmware doesn't provide HID proxy functionality, that I
would find rather usefull if present.
Is it possible to replace the device's firmware with one that can act as HID
proxy? Is Apple BluetoothFirmwareUpdate2.0.1.dmg provided GenericCSR.dfu
firmware compatible with BlueCore4? If not, what are my options?
Thanks,
Janusz