Hi Keith,
(lets keep mailing list in CC)
On Tuesday 17 February 2015 15:00:02 Keith Conger wrote:
> Thanks for getting back to me. I did skip the hciattach part and I
> have verified /system/lib/bluetooth.default.so exists. When enabling
> via the UI I just see the following in the log:
bluetooth.default.so should be in /system/lib/hw/
This lib is loaded via hw_get_module().
(I'm not sure why this wasn't installed there - it should if you used our
Android.mk)
>
> E/BluetoothAdapter( 1109): Bluetooth binder is null
> E/DeviceListPreferenceFragment( 1109): Bluetooth is not supported on this
> device
>
> I have attached a zip of my init scripts I'm using, I'm I missing anything?
I'd make it a bit simpler:
- load modules directly from init.rc on boot
- remove this init.genericam33x.bt.rc file.
this magic is not needed with btusb, also bluetoothd will power up device on
start and power down on shutdown.
- remove init.bt.sh (not needed if you load module on init)
- import init.bluetooth.rc directly from you init.fooboard.rc file
> Thanks again for your help!
> Keith
>
> On Tue, Feb 17, 2015 at 2:47 PM, Szymon Janc <[email protected]> wrote:
> > Hi Keith,
> >
> > On Tuesday 17 February 2015 14:16:37 Keith Conger wrote:
> >> I'm trying to swap out bluedroid with android-bluez to add bluetooth
> >> usb adapter support into KitKat for my Beaglebone Black(ARM). Should
> >> this be possible?
> >
> > Yeap, this is possible.
> >
> >> I followed this guide,
> >> http://forum.xda-developers.com/showthread.php?t=2640723 skipping the
> >> CSR parts.
> >>
> >> Here is a logcat with debugging enabled. I've googled the errors and
> >> have had no luck. Does anyone have any ideas?
> >>
> >> I/bluetoothd( 1072): Bluetooth daemon 5.28
> >>
> >> D/bluetoothd( 1072):
> >> external/bluetooth/bluez/android/main.c:set_capabilities() Caps: eff:
> >> 0x3400, perm: 0x3400, inh: 0x0
> >>
> >> D/bluetoothd( 1072):
> >> external/bluetooth/bluez/android/bluetooth.c:bt_bluetooth_start()
> >> index -1
> >>
> >> I/bluetoothd( 1072): Starting SDP server
> >>
> >> D/bluetoothd( 1072): external/bluetooth/bluez/android/main.c:main()
> >> Entering main loop
> >>
> >> I/bluetoothd( 1072): mgmt_if: [0xffff] command 0x0001
> >>
> >> I/bluetoothd( 1072): mgmt_if: < 01 00 ff ff 00 00
> >>
> >> ..??..
> >>
> >> I/bluetoothd( 1072): mgmt_if: > 01 00 ff ff 06 00 01 00 00 01 07 00
> >>
> >> ..??........
> >>
> >> I/bluetoothd( 1072): mgmt_if: [0xffff] command 0x0001 complete: 0x00
> >>
> >> D/bluetoothd( 1072):
> >> external/bluetooth/bluez/android/bluetooth.c:read_version_complete()
> >>
> >> I/bluetoothd( 1072): Bluetooth management interface 1.7 initialized
> >>
> >> I/bluetoothd( 1072): Kernel connection control will be used
> >>
> >> I/bluetoothd( 1072): mgmt_if: [0xffff] command 0x0003
> >>
> >> I/bluetoothd( 1072): mgmt_if: < 03 00 ff ff 00 00
> >>
> >> ..??..
> >>
> >> I/bluetoothd( 1072): mgmt_if: > 01 00 ff ff 07 00 03 00 00 01 00 00 00
> >>
> >> ..??.........
> >>
> >> I/bluetoothd( 1072): mgmt_if: [0xffff] command 0x0003 complete: 0x00
> >>
> >> D/bluetoothd( 1072):
> >> external/bluetooth/bluez/android/bluetooth.c:read_index_list_complete()
> >>
> >> D/bluetoothd( 1072):
> >> external/bluetooth/bluez/android/bluetooth.c:read_index_list_complete()
> >> Number of controllers: 1
> >>
> >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0004
> >>
> >> I/bluetoothd( 1072): mgmt_if: < 04 00 00 00 00 00
> >>
> >> ......
> >>
> >> I/bluetoothd( 1072): mgmt_if: > 01 00 00 00 1b 01 04 00 00 e9 36 36 e7
> >> 18 00 03 .........?66?...
> >>
> >> I/bluetoothd( 1072): mgmt_if: 0f 00 bf 10 00 00 90 00 00 00 00 00 00
> >> 42 43 4d ..?..........BCM
> >>
> >> I/bluetoothd( 1072): mgmt_if: 32 30 34 35 42 33 00 00 00 00 00 00 00
> >> 00 00 00 2045B3..........
> >>
> >> I/bluetoothd( 1072): mgmt_if: 00 00 00 00 00 00 00 00 00 00 00 00 00
> >> 00 00 00 ................
> >>
> >> I/bluetoothd( 1072): mgmt_if: 00 00 00 00 00 00 00 00 00 00 00 00 00
> >> 00 00 00 ................
> >>
> >> I/bluetoothd( 1072): mgmt_if: 00 00 00 00 00 00 00 00 00 00 00 00 00
> >> 00 00 00 ................
> >>
> >> I/bluetoothd( 1072): mgmt_if: 00 00 00 00 00 00 00 00 00 00 00 00 00
> >> 00 00 00 ................
> >>
> >> I/bluetoothd( 1072): mgmt_if: 00 00 00 00 00 00 00 00 00 00 00 00 00
> >> 00 00 00 ................
> >>
> >> I/bluetoothd( 1072): mgmt_if: 00 00 00 00 00 00 00 00 00 00 00 00 00
> >> 00 00 00 ................
> >>
> >> I/bluetoothd( 1072): mgmt_if: 00 00 00 00 00 00 00 00 00 00 00 00 00
> >> 00 00 00 ................
> >>
> >> I/bluetoothd( 1072): mgmt_if: 00 00 00 00 00 00 00 00 00 00 00 00 00
> >> 00 00 00 ................
> >>
> >> I/bluetoothd( 1072): mgmt_if: 00 00 00 00 00 00 00 00 00 00 00 00 00
> >> 00 00 00 ................
> >>
> >> I/bluetoothd( 1072): mgmt_if: 00 00 00 00 00 00 00 00 00 00 00 00 00
> >> 00 00 00 ................
> >>
> >> I/bluetoothd( 1072): mgmt_if: 00 00 00 00 00 00 00 00 00 00 00 00 00
> >> 00 00 00 ................
> >>
> >> I/bluetoothd( 1072): mgmt_if: 00 00 00 00 00 00 00 00 00 00 00 00 00
> >> 00 00 00 ................
> >>
> >> I/bluetoothd( 1072): mgmt_if: 00 00 00 00 00 00 00 00 00 00 00 00 00
> >> 00 00 00 ................
> >>
> >> I/bluetoothd( 1072): mgmt_if: 00 00 00 00 00 00 00 00 00 00 00 00 00
> >> 00 00 00 ................
> >>
> >> I/bluetoothd( 1072): mgmt_if: 00 00 00 00 00 00 00 00 00 00 00 00 00
> >> 00 00 00 ................
> >>
> >> I/bluetoothd( 1072): mgmt_if: 00
> >>
> >> .
> >>
> >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0004 complete: 0x00
> >>
> >> D/bluetoothd( 1072):
> >> external/bluetooth/bluez/android/bluetooth.c:read_info_complete()
> >>
> >> D/bluetoothd( 1072):
> >> external/bluetooth/bluez/src/sdpd-service.c:register_device_id()
> >> Adding device id record for 0002:1d6b:0247:051c
> >>
> >> D/bluetoothd( 1072):
> >> external/bluetooth/bluez/src/sdpd-service.c:add_record_to_server()
> >> Adding record with handle 0x10001
> >>
> >> D/bluetoothd( 1072):
> >> external/bluetooth/bluez/src/sdpd-service.c:add_record_to_server()
> >> Record pattern UUID 00001002-0000-1000-8000-00805f9
> >>
> >> D/bluetoothd( 1072):
> >> external/bluetooth/bluez/src/sdpd-service.c:add_record_to_server()
> >> Record pattern UUID 0000113a-0000-1000-8000-00805f9
> >>
> >> D/bluetoothd( 1072):
> >> external/bluetooth/bluez/src/sdpd-service.c:add_record_to_server()
> >> Record pattern UUID 0000113b-0000-1000-8000-00805f9
> >>
> >> D/bluetoothd( 1072):
> >> external/bluetooth/bluez/android/bluetooth.c:load_ltks() ltks 0
> >>
> >> D/bluetoothd( 1072):
> >> external/bluetooth/bluez/android/bluetooth.c:load_irks() irks 0
> >>
> >> D/bluetoothd( 1072):
> >> external/bluetooth/bluez/android/bluetooth.c:load_link_keys() keys 0
> >>
> >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x000e
> >>
> >> I/bluetoothd( 1072): mgmt_if: < 0e 00 00 00 02 00 02 0c
> >>
> >> ........
> >>
> >> I/bluetoothd( 1072): mgmt_if: > 01 00 00 00 06 00 0e 00 00 00 00 00
> >>
> >> ............
> >>
> >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x000e complete: 0x00
> >>
> >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0011
> >>
> >> I/bluetoothd( 1072): mgmt_if: < 11 00 00 00 10 00 00 00 00 00 00 00 00
> >> 00 00 00 ................
> >>
> >> I/bluetoothd( 1072): mgmt_if: 00 00 00 00 00 00
> >>
> >> ......
> >>
> >> I/bluetoothd( 1072): mgmt_if: > 01 00 00 00 06 00 11 00 00 00 00 00
> >>
> >> ............
> >>
> >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0011 complete: 0x00
> >>
> >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0034
> >>
> >> I/bluetoothd( 1072): mgmt_if: < 34 00 00 00 07 00 00 00 00 00 00 00 00
> >>
> >> 4............
> >>
> >> I/bluetoothd( 1072): mgmt_if: > 01 00 00 00 0a 00 34 00 00 00 00 00 00
> >> 00 00 00 ......4.........
> >>
> >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0034 complete: 0x00
> >>
> >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0018
> >>
> >> I/bluetoothd( 1072): mgmt_if: < 18 00 00 00 01 00 01
> >>
> >> .......
> >>
> >> I/bluetoothd( 1072): mgmt_if: > 01 00 00 00 03 00 18 00 00
> >>
> >> .........
> >>
> >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0018 complete: 0x00
> >>
> >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0028
> >>
> >> I/bluetoothd( 1072): mgmt_if: < 28 00 00 00 08 00 02 00 6b 1d 47 02 1c
> >> 05 (.......k.G...
> >>
> >> I/bluetoothd( 1072): mgmt_if: > 01 00 00 00 03 00 28 00 00
> >>
> >> ......(..
> >>
> >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0028 complete: 0x00
> >>
> >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0010
> >>
> >> I/bluetoothd( 1072): mgmt_if: < 10 00 00 00 11 00 fb 34 9b 5f 80 00 00
> >> 80 00 10 ......?4._......
> >>
> >> I/bluetoothd( 1072): mgmt_if: 00 00 00 12 00 00 00
> >>
> >> .......
> >>
> >> I/bluetoothd( 1072): mgmt_if: > 01 00 00 00 06 00 10 00 00 00 00 00
> >>
> >> ............
> >>
> >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0010 complete: 0x00
> >>
> >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0010
> >>
> >> I/bluetoothd( 1072): mgmt_if: < 10 00 00 00 11 00 fb 34 9b 5f 80 00 00
> >> 80 00 10 ......?4._......
> >>
> >> I/bluetoothd( 1072): mgmt_if: 00 00 3b 11 00 00 00
> >>
> >> ..;....
> >>
> >> I/bluetoothd( 1072): mgmt_if: > 01 00 00 00 06 00 10 00 00 00 00 00
> >>
> >> ............
> >>
> >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0010 complete: 0x00
> >>
> >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0013
> >>
> >> I/bluetoothd( 1072): mgmt_if: < 13 00 00 00 02 00 00 00
> >>
> >> ........
> >>
> >> I/bluetoothd( 1072): mgmt_if: > 02 00 00 00 03 00 13 00 0c
> >>
> >> .........
> >>
> >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x13 status: 0x0c
> >>
> >> I/bluetoothd( 1072): Failed to load LTKs: Not Supported (0x0c)
> >>
> >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0030
> >>
> >> I/bluetoothd( 1072): mgmt_if: < 30 00 00 00 02 00 00 00
> >>
> >> 0.......
> >>
> >> I/bluetoothd( 1072): mgmt_if: > 02 00 00 00 03 00 30 00 0c
> >>
> >> ......0..
> >>
> >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x30 status: 0x0c
> >>
> >> I/bluetoothd( 1072): Failed to load IRKs: Not Supported (0x0c)
> >>
> >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0012
> >>
> >> I/bluetoothd( 1072): mgmt_if: < 12 00 00 00 03 00 00 00 00
> >>
> >> .........
> >>
> >> I/bluetoothd( 1072): mgmt_if: > 01 00 00 00 03 00 12 00 00
> >>
> >> .........
> >>
> >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0012 complete: 0x00
> >>
> >> D/bluetoothd( 1072):
> >> external/bluetooth/bluez/android/bluetooth.c:load_link_keys_complete()
> >> status 0
> >>
> >> I/bluetoothd( 1072): Adapter initialized
> >>
> >> D/bluetoothd( 1072):
> >> external/bluetooth/bluez/android/ipc.c:cmd_connect_cb()
> >>
> >> E/bluetoothd( 1072): IPC: command socket connect failed
> >>
> >> I/bluetoothd( 1072): Switching controller off
> >>
> >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0005
> >>
> >> I/bluetoothd( 1072): mgmt_if: < 05 00 00 00 01 00 00
> >>
> >> .......
> >>
> >> I/bluetoothd( 1072): mgmt_if: > 01 00 00 00 07 00 05 00 00 90 00 00 00
> >>
> >> .............
> >>
> >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0005 complete: 0x00
> >>
> >> D/bluetoothd( 1072):
> >> external/bluetooth/bluez/android/main.c:cleanup_services()
> >>
> >> I/bluetoothd( 1072): Stopping SDP server
> >>
> >> I/bluetoothd( 1072): Exit
> >
> > This log looks OK. Adapter was found and initialized. Only problem is that
> > there was no IPC socket listening for it to connect.
> >
> > On Android bluetoothd is not suppose to be started 'by hand'. It needs to
> > be started as service defined in init.rc (check android/README and
> > android/init.bluetooth.rc). This service is started via
> > bluetooth.default.so provided by BlueZ (this is implementation ofn
> > Android Bluetooth HAL interface). When bluetoothd starts and initializes
> > adapter it tries to connect IPC to this library. If lib is not loaded
> > (and there is no socket to connect to) bluetoothd shuts down.
> >
> > This library is loaded by Android Framework and when you enable BT from UI
> > lib will be initialized and daemon will be started. Other option for
> > testing is our test tool called haltest. This is command line tool that
> > will load bt lib and allow you to play with bt stack (this tool doesn't
> > use Android Framework).>
> > So what you should check:
> > - you have init.bluetooth.rc in /
> > - this file is included from your board init.foo.rc file
> > - daemon and bluetooth.default.so are installed on system (this should be
> >
> > handled just fine by Android.mk provided by BlueZ)
> >
> > - you don't need hciattach service - this is not needed with btusb
> >
> > --
> > Szymon K. Janc
> > [email protected]
--
Szymon K. Janc
[email protected]
On Wednesday 18 of February 2015 20:52:06 Szymon Janc wrote:
> Hi Keith,
>
> On Wednesday 18 of February 2015 11:41:01 Keith Conger wrote:
> > Ok, things are looking somewhat better.
> >
> > It doesn't seem to work in the UI. But haltest looks good I think.
> >
> > Here is a logcat from boot to me enable Bluetooth and looking for devices:
> >
> > ########## Start Logcat ##########
> >
> > adb logcat|grep -i blue
> >
> > - waiting for device -
> >
> > W/PackageParser( 595): No actions in intent filter at
> > /system/app/Bluetooth.apk Binary XML file line #211
> >
> > W/PackageManager( 595): Unknown permission
> > com.google.android.gallery3d.permission.GALLERY_PROVIDER in package
> > com.android.bluetooth
> >
> > W/PackageManager( 595): Unknown permission
> > android.permission.MMS_SEND_OUTBOX_MSG in package
> > com.android.bluetooth
> >
> > I/SystemServer( 595): No Bluetooh Service (emulator)
> >
> > W/PackageManager( 595): Unknown permission
> > com.google.android.gallery3d.permission.GALLERY_PROVIDER in package
> > com.android.bluetooth
> >
> > W/PackageManager( 595): Unknown permission
> > android.permission.MMS_SEND_OUTBOX_MSG in package
> > com.android.bluetooth
> >
> > E/BluetoothAdapter( 727): Bluetooth binder is null
> >
> > E/BluetoothAdapter( 727): Bluetooth binder is null
> >
> > E/BluetoothAdapter( 654): Bluetooth binder is null
> >
> > E/BluetoothAdapter( 654): Bluetooth binder is null
> >
> > E/BluetoothAdapter( 727): Bluetooth binder is null
> >
> > E/BluetoothAdapter( 654): Bluetooth binder is null
> >
> > E/BluetoothAdapter( 654): Bluetooth binder is null
> >
> > E/BluetoothAdapter( 654): Bluetooth binder is null
> >
> > E/BluetoothAdapter( 717): Bluetooth binder is null
> >
> > E/BluetoothAdapter( 717): Bluetooth binder is null
> >
> > E/BluetoothAdapter( 595): Bluetooth binder is null
> >
> > E/BluetoothAdapter( 595): Bluetooth binder is null
> >
> > E/BluetoothAdapter( 717): Bluetooth binder is null
> >
> > D/SubSettings( 717): Launching fragment
> > com.android.settings.bluetooth.BluetoothSettings
> >
> > E/BluetoothAdapter( 717): Bluetooth binder is null
> >
> > E/DeviceListPreferenceFragment( 717): Bluetooth is not supported on this
> > device
> >
> > ########## END Logcat ##########
> >
> >
> >
> >
> >
> > With haltest, it appears to work fine:
> >
> >
> > ########## Start haltest session ##########
> > root@beagleboneblack:/ # haltest
> >
> > hw_get_module_by_class returned -2
> >
> > hw_get_module_by_class returned -2
> >
> > thread_evt_cb: evt=ASSOCIATE_JVM
> >
> > if_bluetooth->init: BT_STATUS_SUCCESS
> >
> > get_profile_interface(handsfree) : 0xb6e2a134
> >
> > get_profile_interface(a2dp) : 0xb6e2a0ec
> >
> > get_profile_interface(avrcp) : 0xb6e2a100
> >
> > get_profile_interface(health) : 0xb6e2a3d0
> >
> > get_profile_interface(hidhost) : 0xb6e2a0a0
> >
> > get_profile_interface(pan) : 0xb6e2a0d0
> >
> > get_profile_interface(gatt) : 0xb6e2a1ac
> >
> > get_profile_interface(socket) : 0xb6e2a094
> >
> > if_av->init: BT_STATUS_SUCCESS
> >
> > if_rc->init: BT_STATUS_SUCCESS
> >
> > adapter_properties_cb: status=BT_STATUS_SUCCESS num_properties=1
> >
> > prop: type=BT_PROPERTY_UUIDS len=80 val={0000110e, 0000110c, 0000110a,
> > 0000113b, 00001200}
> >
> > if_gatt->init: BT_STATUS_FAIL
> >
> > adapter_properties_cb: status=BT_STATUS_SUCCESS num_properties=1
> >
> > prop: type=BT_PROPERTY_UUIDS len=80 val={0000110e, 0000110c, 0000110a,
> > 0000113b, 00001200}
> >
> > adapter_properties_cb: status=BT_STATUS_SUCCESS num_properties=1
> >
> > prop: type=BT_PROPERTY_UUIDS len=80 val={0000110e, 0000110c, 0000110a,
> > 0000113b, 00001200}
> >
> > if_hf->init: BT_STATUS_SUCCESS
> >
> > adapter_properties_cb: status=BT_STATUS_SUCCESS num_properties=1
> >
> > prop: type=BT_PROPERTY_UUIDS len=96 val={00001112, 0000110e, 0000110c,
> > 0000110a, 0000113b, 00001200}
> >
> > if_hh->init: BT_STATUS_SUCCESS
> >
> > if_pan->init: BT_STATUS_SUCCESS
> >
> > adapter_properties_cb: status=BT_STATUS_SUCCESS num_properties=1
> >
> > prop: type=BT_PROPERTY_UUIDS len=128 val={00001115, 00001116,
> > 00001112, 0000110e, 0000110c, 0000110a, 0000113b, 00001200}
> >
> > adapter_properties_cb: status=BT_STATUS_SUCCESS num_properties=1
> >
> > prop: type=BT_PROPERTY_UUIDS len=128 val={00001115, 00001116,
> > 00001112, 0000110e, 0000110c, 0000110a, 0000113b, 00001200}
> >
> > if_hl->init: BT_STATUS_SUCCESS
> >
> > > bluetooth init
> >
> > if_bluetooth->init: BT_STATUS_DONE
> >
> > > bluetooth enable
> >
> > adapter_properties_cb: status=BT_STATUS_SUCCESS num_properties=9
> >
> > prop: type=BT_PROPERTY_BDADDR len=6 val=00:18:e7:36:36:e9
> >
> > prop: type=BT_PROPERTY_BDNAME len=16 val=BeagleBone Black
> >
> > prop: type=BT_PROPERTY_CLASS_OF_DEVICE len=4 val=000000
> >
> > prop: type=BT_PROPERTY_TYPE_OF_DEVICE len=4 val=BT_DEVICE_DEVTYPE_BREDR
> >
> > prop: type=BT_PROPERTY_ADAPTER_SCAN_MODE len=4 val=BT_SCAN_MODE_NONE
> >
> > prop: type=BT_PROPERTY_ADAPTER_DISCOVERY_TIMEOUT len=4 val=120
> >
> > prop: type=BT_PROPERTY_ADAPTER_BONDED_DEVICES len=0 val={}
> >
> > prop: type=BT_PROPERTY_UUIDS len=128 val={00001115, 00001116,
> > 00001112, 0000110e, 0000110c, 0000110a, 0000113b, 00001200}
> >
> > prop: type=(unknown) len=8 val=0xb6e1da5d
> >
> > if_bluetooth->enable: BT_STATUS_SUCCESS
> >
> > adapter_properties_cb: status=BT_STATUS_SUCCESS num_properties=1
> >
> > prop: type=BT_PROPERTY_CLASS_OF_DEVICE len=4 val=0a020c
> >
> > adapter_state_changed_cb: state=BT_STATE_ON
> >
> > > bluetooth start_discovery
> >
> > if_bluetooth->start_discovery: BT_STATUS_SUCCESS
> >
> > discovery_state_changed_cb: state=BT_DISCOVERY_STARTED
> >
> > device_found_cb: num_properties=5
> >
> > prop: type=BT_PROPERTY_BDADDR len=6 val=ec:88:92:c3:1e:48
> >
> > prop: type=BT_PROPERTY_TYPE_OF_DEVICE len=4 val=BT_DEVICE_DEVTYPE_BREDR
> >
> > prop: type=BT_PROPERTY_CLASS_OF_DEVICE len=4 val=5a020c
> >
> > prop: type=BT_PROPERTY_REMOTE_RSSI len=4 val=216
> >
> > prop: type=BT_PROPERTY_BDNAME len=17 val=EC:88:92:C3:1E:48
> >
> > remote_device_properties_cb: status=BT_STATUS_SUCCESS
> > bd_addr=ec:88:92:c3:1e:48 num_properties=1
> >
> > prop: type=BT_PROPERTY_BDNAME len=7 val=Nexus 6
> >
> > discovery_state_changed_cb: state=BT_DISCOVERY_STOPPED
> >
> > ########## End haltest session ##########
>
> This looks OK. You just need to reboot your board and UI should also be
> working.
>
> This is due to Android doing test BT start while booting and if that failed
> it won't try to load BT HAL again.
>
> Also note that you cannot run BT from UI and haltest at the same.
I thing that might be affecting this test BT enable is that kernel modules are
loaded too late in boot process.
I recommend loading them in "on boot" target. See our reference tree:
https://code.google.com/p/aosp-bluez/source/browse/init.mako.rc?repo=device-lge-mako#62
--
BR
Szymon Janc
Hi Keith,
On Wednesday 18 of February 2015 11:41:01 Keith Conger wrote:
> Ok, things are looking somewhat better.
>
> It doesn't seem to work in the UI. But haltest looks good I think.
>
> Here is a logcat from boot to me enable Bluetooth and looking for devices:
>
> ########## Start Logcat ##########
>
> adb logcat|grep -i blue
>
> - waiting for device -
>
> W/PackageParser( 595): No actions in intent filter at
> /system/app/Bluetooth.apk Binary XML file line #211
>
> W/PackageManager( 595): Unknown permission
> com.google.android.gallery3d.permission.GALLERY_PROVIDER in package
> com.android.bluetooth
>
> W/PackageManager( 595): Unknown permission
> android.permission.MMS_SEND_OUTBOX_MSG in package
> com.android.bluetooth
>
> I/SystemServer( 595): No Bluetooh Service (emulator)
>
> W/PackageManager( 595): Unknown permission
> com.google.android.gallery3d.permission.GALLERY_PROVIDER in package
> com.android.bluetooth
>
> W/PackageManager( 595): Unknown permission
> android.permission.MMS_SEND_OUTBOX_MSG in package
> com.android.bluetooth
>
> E/BluetoothAdapter( 727): Bluetooth binder is null
>
> E/BluetoothAdapter( 727): Bluetooth binder is null
>
> E/BluetoothAdapter( 654): Bluetooth binder is null
>
> E/BluetoothAdapter( 654): Bluetooth binder is null
>
> E/BluetoothAdapter( 727): Bluetooth binder is null
>
> E/BluetoothAdapter( 654): Bluetooth binder is null
>
> E/BluetoothAdapter( 654): Bluetooth binder is null
>
> E/BluetoothAdapter( 654): Bluetooth binder is null
>
> E/BluetoothAdapter( 717): Bluetooth binder is null
>
> E/BluetoothAdapter( 717): Bluetooth binder is null
>
> E/BluetoothAdapter( 595): Bluetooth binder is null
>
> E/BluetoothAdapter( 595): Bluetooth binder is null
>
> E/BluetoothAdapter( 717): Bluetooth binder is null
>
> D/SubSettings( 717): Launching fragment
> com.android.settings.bluetooth.BluetoothSettings
>
> E/BluetoothAdapter( 717): Bluetooth binder is null
>
> E/DeviceListPreferenceFragment( 717): Bluetooth is not supported on this
> device
>
> ########## END Logcat ##########
>
>
>
>
>
> With haltest, it appears to work fine:
>
>
> ########## Start haltest session ##########
> root@beagleboneblack:/ # haltest
>
> hw_get_module_by_class returned -2
>
> hw_get_module_by_class returned -2
>
> thread_evt_cb: evt=ASSOCIATE_JVM
>
> if_bluetooth->init: BT_STATUS_SUCCESS
>
> get_profile_interface(handsfree) : 0xb6e2a134
>
> get_profile_interface(a2dp) : 0xb6e2a0ec
>
> get_profile_interface(avrcp) : 0xb6e2a100
>
> get_profile_interface(health) : 0xb6e2a3d0
>
> get_profile_interface(hidhost) : 0xb6e2a0a0
>
> get_profile_interface(pan) : 0xb6e2a0d0
>
> get_profile_interface(gatt) : 0xb6e2a1ac
>
> get_profile_interface(socket) : 0xb6e2a094
>
> if_av->init: BT_STATUS_SUCCESS
>
> if_rc->init: BT_STATUS_SUCCESS
>
> adapter_properties_cb: status=BT_STATUS_SUCCESS num_properties=1
>
> prop: type=BT_PROPERTY_UUIDS len=80 val={0000110e, 0000110c, 0000110a,
> 0000113b, 00001200}
>
> if_gatt->init: BT_STATUS_FAIL
>
> adapter_properties_cb: status=BT_STATUS_SUCCESS num_properties=1
>
> prop: type=BT_PROPERTY_UUIDS len=80 val={0000110e, 0000110c, 0000110a,
> 0000113b, 00001200}
>
> adapter_properties_cb: status=BT_STATUS_SUCCESS num_properties=1
>
> prop: type=BT_PROPERTY_UUIDS len=80 val={0000110e, 0000110c, 0000110a,
> 0000113b, 00001200}
>
> if_hf->init: BT_STATUS_SUCCESS
>
> adapter_properties_cb: status=BT_STATUS_SUCCESS num_properties=1
>
> prop: type=BT_PROPERTY_UUIDS len=96 val={00001112, 0000110e, 0000110c,
> 0000110a, 0000113b, 00001200}
>
> if_hh->init: BT_STATUS_SUCCESS
>
> if_pan->init: BT_STATUS_SUCCESS
>
> adapter_properties_cb: status=BT_STATUS_SUCCESS num_properties=1
>
> prop: type=BT_PROPERTY_UUIDS len=128 val={00001115, 00001116,
> 00001112, 0000110e, 0000110c, 0000110a, 0000113b, 00001200}
>
> adapter_properties_cb: status=BT_STATUS_SUCCESS num_properties=1
>
> prop: type=BT_PROPERTY_UUIDS len=128 val={00001115, 00001116,
> 00001112, 0000110e, 0000110c, 0000110a, 0000113b, 00001200}
>
> if_hl->init: BT_STATUS_SUCCESS
>
> > bluetooth init
>
> if_bluetooth->init: BT_STATUS_DONE
>
> > bluetooth enable
>
> adapter_properties_cb: status=BT_STATUS_SUCCESS num_properties=9
>
> prop: type=BT_PROPERTY_BDADDR len=6 val=00:18:e7:36:36:e9
>
> prop: type=BT_PROPERTY_BDNAME len=16 val=BeagleBone Black
>
> prop: type=BT_PROPERTY_CLASS_OF_DEVICE len=4 val=000000
>
> prop: type=BT_PROPERTY_TYPE_OF_DEVICE len=4 val=BT_DEVICE_DEVTYPE_BREDR
>
> prop: type=BT_PROPERTY_ADAPTER_SCAN_MODE len=4 val=BT_SCAN_MODE_NONE
>
> prop: type=BT_PROPERTY_ADAPTER_DISCOVERY_TIMEOUT len=4 val=120
>
> prop: type=BT_PROPERTY_ADAPTER_BONDED_DEVICES len=0 val={}
>
> prop: type=BT_PROPERTY_UUIDS len=128 val={00001115, 00001116,
> 00001112, 0000110e, 0000110c, 0000110a, 0000113b, 00001200}
>
> prop: type=(unknown) len=8 val=0xb6e1da5d
>
> if_bluetooth->enable: BT_STATUS_SUCCESS
>
> adapter_properties_cb: status=BT_STATUS_SUCCESS num_properties=1
>
> prop: type=BT_PROPERTY_CLASS_OF_DEVICE len=4 val=0a020c
>
> adapter_state_changed_cb: state=BT_STATE_ON
>
> > bluetooth start_discovery
>
> if_bluetooth->start_discovery: BT_STATUS_SUCCESS
>
> discovery_state_changed_cb: state=BT_DISCOVERY_STARTED
>
> device_found_cb: num_properties=5
>
> prop: type=BT_PROPERTY_BDADDR len=6 val=ec:88:92:c3:1e:48
>
> prop: type=BT_PROPERTY_TYPE_OF_DEVICE len=4 val=BT_DEVICE_DEVTYPE_BREDR
>
> prop: type=BT_PROPERTY_CLASS_OF_DEVICE len=4 val=5a020c
>
> prop: type=BT_PROPERTY_REMOTE_RSSI len=4 val=216
>
> prop: type=BT_PROPERTY_BDNAME len=17 val=EC:88:92:C3:1E:48
>
> remote_device_properties_cb: status=BT_STATUS_SUCCESS
> bd_addr=ec:88:92:c3:1e:48 num_properties=1
>
> prop: type=BT_PROPERTY_BDNAME len=7 val=Nexus 6
>
> discovery_state_changed_cb: state=BT_DISCOVERY_STOPPED
>
> ########## End haltest session ##########
This looks OK. You just need to reboot your board and UI should also be
working.
This is due to Android doing test BT start while booting and if that failed it
won't try to load BT HAL again.
Also note that you cannot run BT from UI and haltest at the same.
--
BR
Szymon Janc
Ok, things are looking somewhat better.
It doesn't seem to work in the UI. But haltest looks good I think.
Here is a logcat from boot to me enable Bluetooth and looking for devices:
########## Start Logcat ##########
adb logcat|grep -i blue
- waiting for device -
W/PackageParser( 595): No actions in intent filter at
/system/app/Bluetooth.apk Binary XML file line #211
W/PackageManager( 595): Unknown permission
com.google.android.gallery3d.permission.GALLERY_PROVIDER in package
com.android.bluetooth
W/PackageManager( 595): Unknown permission
android.permission.MMS_SEND_OUTBOX_MSG in package
com.android.bluetooth
I/SystemServer( 595): No Bluetooh Service (emulator)
W/PackageManager( 595): Unknown permission
com.google.android.gallery3d.permission.GALLERY_PROVIDER in package
com.android.bluetooth
W/PackageManager( 595): Unknown permission
android.permission.MMS_SEND_OUTBOX_MSG in package
com.android.bluetooth
E/BluetoothAdapter( 727): Bluetooth binder is null
E/BluetoothAdapter( 727): Bluetooth binder is null
E/BluetoothAdapter( 654): Bluetooth binder is null
E/BluetoothAdapter( 654): Bluetooth binder is null
E/BluetoothAdapter( 727): Bluetooth binder is null
E/BluetoothAdapter( 654): Bluetooth binder is null
E/BluetoothAdapter( 654): Bluetooth binder is null
E/BluetoothAdapter( 654): Bluetooth binder is null
E/BluetoothAdapter( 717): Bluetooth binder is null
E/BluetoothAdapter( 717): Bluetooth binder is null
E/BluetoothAdapter( 595): Bluetooth binder is null
E/BluetoothAdapter( 595): Bluetooth binder is null
E/BluetoothAdapter( 717): Bluetooth binder is null
D/SubSettings( 717): Launching fragment
com.android.settings.bluetooth.BluetoothSettings
E/BluetoothAdapter( 717): Bluetooth binder is null
E/DeviceListPreferenceFragment( 717): Bluetooth is not supported on this device
########## END Logcat ##########
With haltest, it appears to work fine:
########## Start haltest session ##########
root@beagleboneblack:/ # haltest
hw_get_module_by_class returned -2
hw_get_module_by_class returned -2
thread_evt_cb: evt=ASSOCIATE_JVM
if_bluetooth->init: BT_STATUS_SUCCESS
get_profile_interface(handsfree) : 0xb6e2a134
get_profile_interface(a2dp) : 0xb6e2a0ec
get_profile_interface(avrcp) : 0xb6e2a100
get_profile_interface(health) : 0xb6e2a3d0
get_profile_interface(hidhost) : 0xb6e2a0a0
get_profile_interface(pan) : 0xb6e2a0d0
get_profile_interface(gatt) : 0xb6e2a1ac
get_profile_interface(socket) : 0xb6e2a094
if_av->init: BT_STATUS_SUCCESS
if_rc->init: BT_STATUS_SUCCESS
adapter_properties_cb: status=BT_STATUS_SUCCESS num_properties=1
prop: type=BT_PROPERTY_UUIDS len=80 val={0000110e, 0000110c, 0000110a,
0000113b, 00001200}
if_gatt->init: BT_STATUS_FAIL
adapter_properties_cb: status=BT_STATUS_SUCCESS num_properties=1
prop: type=BT_PROPERTY_UUIDS len=80 val={0000110e, 0000110c, 0000110a,
0000113b, 00001200}
adapter_properties_cb: status=BT_STATUS_SUCCESS num_properties=1
prop: type=BT_PROPERTY_UUIDS len=80 val={0000110e, 0000110c, 0000110a,
0000113b, 00001200}
if_hf->init: BT_STATUS_SUCCESS
adapter_properties_cb: status=BT_STATUS_SUCCESS num_properties=1
prop: type=BT_PROPERTY_UUIDS len=96 val={00001112, 0000110e, 0000110c,
0000110a, 0000113b, 00001200}
if_hh->init: BT_STATUS_SUCCESS
if_pan->init: BT_STATUS_SUCCESS
adapter_properties_cb: status=BT_STATUS_SUCCESS num_properties=1
prop: type=BT_PROPERTY_UUIDS len=128 val={00001115, 00001116,
00001112, 0000110e, 0000110c, 0000110a, 0000113b, 00001200}
adapter_properties_cb: status=BT_STATUS_SUCCESS num_properties=1
prop: type=BT_PROPERTY_UUIDS len=128 val={00001115, 00001116,
00001112, 0000110e, 0000110c, 0000110a, 0000113b, 00001200}
if_hl->init: BT_STATUS_SUCCESS
> bluetooth init
if_bluetooth->init: BT_STATUS_DONE
> bluetooth enable
adapter_properties_cb: status=BT_STATUS_SUCCESS num_properties=9
prop: type=BT_PROPERTY_BDADDR len=6 val=00:18:e7:36:36:e9
prop: type=BT_PROPERTY_BDNAME len=16 val=BeagleBone Black
prop: type=BT_PROPERTY_CLASS_OF_DEVICE len=4 val=000000
prop: type=BT_PROPERTY_TYPE_OF_DEVICE len=4 val=BT_DEVICE_DEVTYPE_BREDR
prop: type=BT_PROPERTY_ADAPTER_SCAN_MODE len=4 val=BT_SCAN_MODE_NONE
prop: type=BT_PROPERTY_ADAPTER_DISCOVERY_TIMEOUT len=4 val=120
prop: type=BT_PROPERTY_ADAPTER_BONDED_DEVICES len=0 val={}
prop: type=BT_PROPERTY_UUIDS len=128 val={00001115, 00001116,
00001112, 0000110e, 0000110c, 0000110a, 0000113b, 00001200}
prop: type=(unknown) len=8 val=0xb6e1da5d
if_bluetooth->enable: BT_STATUS_SUCCESS
adapter_properties_cb: status=BT_STATUS_SUCCESS num_properties=1
prop: type=BT_PROPERTY_CLASS_OF_DEVICE len=4 val=0a020c
adapter_state_changed_cb: state=BT_STATE_ON
> bluetooth start_discovery
if_bluetooth->start_discovery: BT_STATUS_SUCCESS
discovery_state_changed_cb: state=BT_DISCOVERY_STARTED
device_found_cb: num_properties=5
prop: type=BT_PROPERTY_BDADDR len=6 val=ec:88:92:c3:1e:48
prop: type=BT_PROPERTY_TYPE_OF_DEVICE len=4 val=BT_DEVICE_DEVTYPE_BREDR
prop: type=BT_PROPERTY_CLASS_OF_DEVICE len=4 val=5a020c
prop: type=BT_PROPERTY_REMOTE_RSSI len=4 val=216
prop: type=BT_PROPERTY_BDNAME len=17 val=EC:88:92:C3:1E:48
remote_device_properties_cb: status=BT_STATUS_SUCCESS
bd_addr=ec:88:92:c3:1e:48 num_properties=1
prop: type=BT_PROPERTY_BDNAME len=7 val=Nexus 6
discovery_state_changed_cb: state=BT_DISCOVERY_STOPPED
########## End haltest session ##########
On Wed, Feb 18, 2015 at 9:01 AM, Keith Conger <[email protected]> wrote:
> Sorry, about forgetting to reply-all.
>
> I'll give your suggestions a try and report back.
>
> Thanks for the help,
> Keith
>
> On Wed, Feb 18, 2015 at 12:34 AM, Szymon Janc <[email protected]> wrote:
>> Hi Keith,
>>
>> (lets keep mailing list in CC)
>>
>> On Tuesday 17 February 2015 15:00:02 Keith Conger wrote:
>>> Thanks for getting back to me. I did skip the hciattach part and I
>>> have verified /system/lib/bluetooth.default.so exists. When enabling
>>> via the UI I just see the following in the log:
>>
>> bluetooth.default.so should be in /system/lib/hw/
>>
>> This lib is loaded via hw_get_module().
>> (I'm not sure why this wasn't installed there - it should if you used our
>> Android.mk)
>>
>>>
>>> E/BluetoothAdapter( 1109): Bluetooth binder is null
>>> E/DeviceListPreferenceFragment( 1109): Bluetooth is not supported on this
>>> device
>>>
>>> I have attached a zip of my init scripts I'm using, I'm I missing anything?
>>
>> I'd make it a bit simpler:
>> - load modules directly from init.rc on boot
>> - remove this init.genericam33x.bt.rc file.
>> this magic is not needed with btusb, also bluetoothd will power up device on
>> start and power down on shutdown.
>> - remove init.bt.sh (not needed if you load module on init)
>> - import init.bluetooth.rc directly from you init.fooboard.rc file
>>
>>> Thanks again for your help!
>>> Keith
>>>
>>> On Tue, Feb 17, 2015 at 2:47 PM, Szymon Janc <[email protected]> wrote:
>>> > Hi Keith,
>>> >
>>> > On Tuesday 17 February 2015 14:16:37 Keith Conger wrote:
>>> >> I'm trying to swap out bluedroid with android-bluez to add bluetooth
>>> >> usb adapter support into KitKat for my Beaglebone Black(ARM). Should
>>> >> this be possible?
>>> >
>>> > Yeap, this is possible.
>>> >
>>> >> I followed this guide,
>>> >> http://forum.xda-developers.com/showthread.php?t=2640723 skipping the
>>> >> CSR parts.
>>> >>
>>> >> Here is a logcat with debugging enabled. I've googled the errors and
>>> >> have had no luck. Does anyone have any ideas?
>>> >>
>>> >> I/bluetoothd( 1072): Bluetooth daemon 5.28
>>> >>
>>> >> D/bluetoothd( 1072):
>>> >> external/bluetooth/bluez/android/main.c:set_capabilities() Caps: eff:
>>> >> 0x3400, perm: 0x3400, inh: 0x0
>>> >>
>>> >> D/bluetoothd( 1072):
>>> >> external/bluetooth/bluez/android/bluetooth.c:bt_bluetooth_start()
>>> >> index -1
>>> >>
>>> >> I/bluetoothd( 1072): Starting SDP server
>>> >>
>>> >> D/bluetoothd( 1072): external/bluetooth/bluez/android/main.c:main()
>>> >> Entering main loop
>>> >>
>>> >> I/bluetoothd( 1072): mgmt_if: [0xffff] command 0x0001
>>> >>
>>> >> I/bluetoothd( 1072): mgmt_if: < 01 00 ff ff 00 00
>>> >>
>>> >> ..??..
>>> >>
>>> >> I/bluetoothd( 1072): mgmt_if: > 01 00 ff ff 06 00 01 00 00 01 07 00
>>> >>
>>> >> ..??........
>>> >>
>>> >> I/bluetoothd( 1072): mgmt_if: [0xffff] command 0x0001 complete: 0x00
>>> >>
>>> >> D/bluetoothd( 1072):
>>> >> external/bluetooth/bluez/android/bluetooth.c:read_version_complete()
>>> >>
>>> >> I/bluetoothd( 1072): Bluetooth management interface 1.7 initialized
>>> >>
>>> >> I/bluetoothd( 1072): Kernel connection control will be used
>>> >>
>>> >> I/bluetoothd( 1072): mgmt_if: [0xffff] command 0x0003
>>> >>
>>> >> I/bluetoothd( 1072): mgmt_if: < 03 00 ff ff 00 00
>>> >>
>>> >> ..??..
>>> >>
>>> >> I/bluetoothd( 1072): mgmt_if: > 01 00 ff ff 07 00 03 00 00 01 00 00 00
>>> >>
>>> >> ..??.........
>>> >>
>>> >> I/bluetoothd( 1072): mgmt_if: [0xffff] command 0x0003 complete: 0x00
>>> >>
>>> >> D/bluetoothd( 1072):
>>> >> external/bluetooth/bluez/android/bluetooth.c:read_index_list_complete()
>>> >>
>>> >> D/bluetoothd( 1072):
>>> >> external/bluetooth/bluez/android/bluetooth.c:read_index_list_complete()
>>> >> Number of controllers: 1
>>> >>
>>> >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0004
>>> >>
>>> >> I/bluetoothd( 1072): mgmt_if: < 04 00 00 00 00 00
>>> >>
>>> >> ......
>>> >>
>>> >> I/bluetoothd( 1072): mgmt_if: > 01 00 00 00 1b 01 04 00 00 e9 36 36 e7
>>> >> 18 00 03 .........?66?...
>>> >>
>>> >> I/bluetoothd( 1072): mgmt_if: 0f 00 bf 10 00 00 90 00 00 00 00 00 00
>>> >> 42 43 4d ..?..........BCM
>>> >>
>>> >> I/bluetoothd( 1072): mgmt_if: 32 30 34 35 42 33 00 00 00 00 00 00 00
>>> >> 00 00 00 2045B3..........
>>> >>
>>> >> I/bluetoothd( 1072): mgmt_if: 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> >> 00 00 00 ................
>>> >>
>>> >> I/bluetoothd( 1072): mgmt_if: 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> >> 00 00 00 ................
>>> >>
>>> >> I/bluetoothd( 1072): mgmt_if: 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> >> 00 00 00 ................
>>> >>
>>> >> I/bluetoothd( 1072): mgmt_if: 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> >> 00 00 00 ................
>>> >>
>>> >> I/bluetoothd( 1072): mgmt_if: 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> >> 00 00 00 ................
>>> >>
>>> >> I/bluetoothd( 1072): mgmt_if: 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> >> 00 00 00 ................
>>> >>
>>> >> I/bluetoothd( 1072): mgmt_if: 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> >> 00 00 00 ................
>>> >>
>>> >> I/bluetoothd( 1072): mgmt_if: 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> >> 00 00 00 ................
>>> >>
>>> >> I/bluetoothd( 1072): mgmt_if: 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> >> 00 00 00 ................
>>> >>
>>> >> I/bluetoothd( 1072): mgmt_if: 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> >> 00 00 00 ................
>>> >>
>>> >> I/bluetoothd( 1072): mgmt_if: 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> >> 00 00 00 ................
>>> >>
>>> >> I/bluetoothd( 1072): mgmt_if: 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> >> 00 00 00 ................
>>> >>
>>> >> I/bluetoothd( 1072): mgmt_if: 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> >> 00 00 00 ................
>>> >>
>>> >> I/bluetoothd( 1072): mgmt_if: 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> >> 00 00 00 ................
>>> >>
>>> >> I/bluetoothd( 1072): mgmt_if: 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> >> 00 00 00 ................
>>> >>
>>> >> I/bluetoothd( 1072): mgmt_if: 00
>>> >>
>>> >> .
>>> >>
>>> >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0004 complete: 0x00
>>> >>
>>> >> D/bluetoothd( 1072):
>>> >> external/bluetooth/bluez/android/bluetooth.c:read_info_complete()
>>> >>
>>> >> D/bluetoothd( 1072):
>>> >> external/bluetooth/bluez/src/sdpd-service.c:register_device_id()
>>> >> Adding device id record for 0002:1d6b:0247:051c
>>> >>
>>> >> D/bluetoothd( 1072):
>>> >> external/bluetooth/bluez/src/sdpd-service.c:add_record_to_server()
>>> >> Adding record with handle 0x10001
>>> >>
>>> >> D/bluetoothd( 1072):
>>> >> external/bluetooth/bluez/src/sdpd-service.c:add_record_to_server()
>>> >> Record pattern UUID 00001002-0000-1000-8000-00805f9
>>> >>
>>> >> D/bluetoothd( 1072):
>>> >> external/bluetooth/bluez/src/sdpd-service.c:add_record_to_server()
>>> >> Record pattern UUID 0000113a-0000-1000-8000-00805f9
>>> >>
>>> >> D/bluetoothd( 1072):
>>> >> external/bluetooth/bluez/src/sdpd-service.c:add_record_to_server()
>>> >> Record pattern UUID 0000113b-0000-1000-8000-00805f9
>>> >>
>>> >> D/bluetoothd( 1072):
>>> >> external/bluetooth/bluez/android/bluetooth.c:load_ltks() ltks 0
>>> >>
>>> >> D/bluetoothd( 1072):
>>> >> external/bluetooth/bluez/android/bluetooth.c:load_irks() irks 0
>>> >>
>>> >> D/bluetoothd( 1072):
>>> >> external/bluetooth/bluez/android/bluetooth.c:load_link_keys() keys 0
>>> >>
>>> >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x000e
>>> >>
>>> >> I/bluetoothd( 1072): mgmt_if: < 0e 00 00 00 02 00 02 0c
>>> >>
>>> >> ........
>>> >>
>>> >> I/bluetoothd( 1072): mgmt_if: > 01 00 00 00 06 00 0e 00 00 00 00 00
>>> >>
>>> >> ............
>>> >>
>>> >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x000e complete: 0x00
>>> >>
>>> >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0011
>>> >>
>>> >> I/bluetoothd( 1072): mgmt_if: < 11 00 00 00 10 00 00 00 00 00 00 00 00
>>> >> 00 00 00 ................
>>> >>
>>> >> I/bluetoothd( 1072): mgmt_if: 00 00 00 00 00 00
>>> >>
>>> >> ......
>>> >>
>>> >> I/bluetoothd( 1072): mgmt_if: > 01 00 00 00 06 00 11 00 00 00 00 00
>>> >>
>>> >> ............
>>> >>
>>> >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0011 complete: 0x00
>>> >>
>>> >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0034
>>> >>
>>> >> I/bluetoothd( 1072): mgmt_if: < 34 00 00 00 07 00 00 00 00 00 00 00 00
>>> >>
>>> >> 4............
>>> >>
>>> >> I/bluetoothd( 1072): mgmt_if: > 01 00 00 00 0a 00 34 00 00 00 00 00 00
>>> >> 00 00 00 ......4.........
>>> >>
>>> >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0034 complete: 0x00
>>> >>
>>> >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0018
>>> >>
>>> >> I/bluetoothd( 1072): mgmt_if: < 18 00 00 00 01 00 01
>>> >>
>>> >> .......
>>> >>
>>> >> I/bluetoothd( 1072): mgmt_if: > 01 00 00 00 03 00 18 00 00
>>> >>
>>> >> .........
>>> >>
>>> >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0018 complete: 0x00
>>> >>
>>> >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0028
>>> >>
>>> >> I/bluetoothd( 1072): mgmt_if: < 28 00 00 00 08 00 02 00 6b 1d 47 02 1c
>>> >> 05 (.......k.G...
>>> >>
>>> >> I/bluetoothd( 1072): mgmt_if: > 01 00 00 00 03 00 28 00 00
>>> >>
>>> >> ......(..
>>> >>
>>> >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0028 complete: 0x00
>>> >>
>>> >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0010
>>> >>
>>> >> I/bluetoothd( 1072): mgmt_if: < 10 00 00 00 11 00 fb 34 9b 5f 80 00 00
>>> >> 80 00 10 ......?4._......
>>> >>
>>> >> I/bluetoothd( 1072): mgmt_if: 00 00 00 12 00 00 00
>>> >>
>>> >> .......
>>> >>
>>> >> I/bluetoothd( 1072): mgmt_if: > 01 00 00 00 06 00 10 00 00 00 00 00
>>> >>
>>> >> ............
>>> >>
>>> >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0010 complete: 0x00
>>> >>
>>> >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0010
>>> >>
>>> >> I/bluetoothd( 1072): mgmt_if: < 10 00 00 00 11 00 fb 34 9b 5f 80 00 00
>>> >> 80 00 10 ......?4._......
>>> >>
>>> >> I/bluetoothd( 1072): mgmt_if: 00 00 3b 11 00 00 00
>>> >>
>>> >> ..;....
>>> >>
>>> >> I/bluetoothd( 1072): mgmt_if: > 01 00 00 00 06 00 10 00 00 00 00 00
>>> >>
>>> >> ............
>>> >>
>>> >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0010 complete: 0x00
>>> >>
>>> >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0013
>>> >>
>>> >> I/bluetoothd( 1072): mgmt_if: < 13 00 00 00 02 00 00 00
>>> >>
>>> >> ........
>>> >>
>>> >> I/bluetoothd( 1072): mgmt_if: > 02 00 00 00 03 00 13 00 0c
>>> >>
>>> >> .........
>>> >>
>>> >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x13 status: 0x0c
>>> >>
>>> >> I/bluetoothd( 1072): Failed to load LTKs: Not Supported (0x0c)
>>> >>
>>> >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0030
>>> >>
>>> >> I/bluetoothd( 1072): mgmt_if: < 30 00 00 00 02 00 00 00
>>> >>
>>> >> 0.......
>>> >>
>>> >> I/bluetoothd( 1072): mgmt_if: > 02 00 00 00 03 00 30 00 0c
>>> >>
>>> >> ......0..
>>> >>
>>> >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x30 status: 0x0c
>>> >>
>>> >> I/bluetoothd( 1072): Failed to load IRKs: Not Supported (0x0c)
>>> >>
>>> >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0012
>>> >>
>>> >> I/bluetoothd( 1072): mgmt_if: < 12 00 00 00 03 00 00 00 00
>>> >>
>>> >> .........
>>> >>
>>> >> I/bluetoothd( 1072): mgmt_if: > 01 00 00 00 03 00 12 00 00
>>> >>
>>> >> .........
>>> >>
>>> >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0012 complete: 0x00
>>> >>
>>> >> D/bluetoothd( 1072):
>>> >> external/bluetooth/bluez/android/bluetooth.c:load_link_keys_complete()
>>> >> status 0
>>> >>
>>> >> I/bluetoothd( 1072): Adapter initialized
>>> >>
>>> >> D/bluetoothd( 1072):
>>> >> external/bluetooth/bluez/android/ipc.c:cmd_connect_cb()
>>> >>
>>> >> E/bluetoothd( 1072): IPC: command socket connect failed
>>> >>
>>> >> I/bluetoothd( 1072): Switching controller off
>>> >>
>>> >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0005
>>> >>
>>> >> I/bluetoothd( 1072): mgmt_if: < 05 00 00 00 01 00 00
>>> >>
>>> >> .......
>>> >>
>>> >> I/bluetoothd( 1072): mgmt_if: > 01 00 00 00 07 00 05 00 00 90 00 00 00
>>> >>
>>> >> .............
>>> >>
>>> >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0005 complete: 0x00
>>> >>
>>> >> D/bluetoothd( 1072):
>>> >> external/bluetooth/bluez/android/main.c:cleanup_services()
>>> >>
>>> >> I/bluetoothd( 1072): Stopping SDP server
>>> >>
>>> >> I/bluetoothd( 1072): Exit
>>> >
>>> > This log looks OK. Adapter was found and initialized. Only problem is that
>>> > there was no IPC socket listening for it to connect.
>>> >
>>> > On Android bluetoothd is not suppose to be started 'by hand'. It needs to
>>> > be started as service defined in init.rc (check android/README and
>>> > android/init.bluetooth.rc). This service is started via
>>> > bluetooth.default.so provided by BlueZ (this is implementation ofn
>>> > Android Bluetooth HAL interface). When bluetoothd starts and initializes
>>> > adapter it tries to connect IPC to this library. If lib is not loaded
>>> > (and there is no socket to connect to) bluetoothd shuts down.
>>> >
>>> > This library is loaded by Android Framework and when you enable BT from UI
>>> > lib will be initialized and daemon will be started. Other option for
>>> > testing is our test tool called haltest. This is command line tool that
>>> > will load bt lib and allow you to play with bt stack (this tool doesn't
>>> > use Android Framework).>
>>> > So what you should check:
>>> > - you have init.bluetooth.rc in /
>>> > - this file is included from your board init.foo.rc file
>>> > - daemon and bluetooth.default.so are installed on system (this should be
>>> >
>>> > handled just fine by Android.mk provided by BlueZ)
>>> >
>>> > - you don't need hciattach service - this is not needed with btusb
>>> >
>>> > --
>>> > Szymon K. Janc
>>> > [email protected]
>>
>> --
>> Szymon K. Janc
>> [email protected]
>
>
>
> --
> Keith Conger
> keith DOT conger AT gmail DOT com
> http://thecongers.org
--
Keith Conger
keith DOT conger AT gmail DOT com
http://thecongers.org
Sorry, about forgetting to reply-all.
I'll give your suggestions a try and report back.
Thanks for the help,
Keith
On Wed, Feb 18, 2015 at 12:34 AM, Szymon Janc <[email protected]> wrote:
> Hi Keith,
>
> (lets keep mailing list in CC)
>
> On Tuesday 17 February 2015 15:00:02 Keith Conger wrote:
>> Thanks for getting back to me. I did skip the hciattach part and I
>> have verified /system/lib/bluetooth.default.so exists. When enabling
>> via the UI I just see the following in the log:
>
> bluetooth.default.so should be in /system/lib/hw/
>
> This lib is loaded via hw_get_module().
> (I'm not sure why this wasn't installed there - it should if you used our
> Android.mk)
>
>>
>> E/BluetoothAdapter( 1109): Bluetooth binder is null
>> E/DeviceListPreferenceFragment( 1109): Bluetooth is not supported on this
>> device
>>
>> I have attached a zip of my init scripts I'm using, I'm I missing anything?
>
> I'd make it a bit simpler:
> - load modules directly from init.rc on boot
> - remove this init.genericam33x.bt.rc file.
> this magic is not needed with btusb, also bluetoothd will power up device on
> start and power down on shutdown.
> - remove init.bt.sh (not needed if you load module on init)
> - import init.bluetooth.rc directly from you init.fooboard.rc file
>
>> Thanks again for your help!
>> Keith
>>
>> On Tue, Feb 17, 2015 at 2:47 PM, Szymon Janc <[email protected]> wrote:
>> > Hi Keith,
>> >
>> > On Tuesday 17 February 2015 14:16:37 Keith Conger wrote:
>> >> I'm trying to swap out bluedroid with android-bluez to add bluetooth
>> >> usb adapter support into KitKat for my Beaglebone Black(ARM). Should
>> >> this be possible?
>> >
>> > Yeap, this is possible.
>> >
>> >> I followed this guide,
>> >> http://forum.xda-developers.com/showthread.php?t=2640723 skipping the
>> >> CSR parts.
>> >>
>> >> Here is a logcat with debugging enabled. I've googled the errors and
>> >> have had no luck. Does anyone have any ideas?
>> >>
>> >> I/bluetoothd( 1072): Bluetooth daemon 5.28
>> >>
>> >> D/bluetoothd( 1072):
>> >> external/bluetooth/bluez/android/main.c:set_capabilities() Caps: eff:
>> >> 0x3400, perm: 0x3400, inh: 0x0
>> >>
>> >> D/bluetoothd( 1072):
>> >> external/bluetooth/bluez/android/bluetooth.c:bt_bluetooth_start()
>> >> index -1
>> >>
>> >> I/bluetoothd( 1072): Starting SDP server
>> >>
>> >> D/bluetoothd( 1072): external/bluetooth/bluez/android/main.c:main()
>> >> Entering main loop
>> >>
>> >> I/bluetoothd( 1072): mgmt_if: [0xffff] command 0x0001
>> >>
>> >> I/bluetoothd( 1072): mgmt_if: < 01 00 ff ff 00 00
>> >>
>> >> ..??..
>> >>
>> >> I/bluetoothd( 1072): mgmt_if: > 01 00 ff ff 06 00 01 00 00 01 07 00
>> >>
>> >> ..??........
>> >>
>> >> I/bluetoothd( 1072): mgmt_if: [0xffff] command 0x0001 complete: 0x00
>> >>
>> >> D/bluetoothd( 1072):
>> >> external/bluetooth/bluez/android/bluetooth.c:read_version_complete()
>> >>
>> >> I/bluetoothd( 1072): Bluetooth management interface 1.7 initialized
>> >>
>> >> I/bluetoothd( 1072): Kernel connection control will be used
>> >>
>> >> I/bluetoothd( 1072): mgmt_if: [0xffff] command 0x0003
>> >>
>> >> I/bluetoothd( 1072): mgmt_if: < 03 00 ff ff 00 00
>> >>
>> >> ..??..
>> >>
>> >> I/bluetoothd( 1072): mgmt_if: > 01 00 ff ff 07 00 03 00 00 01 00 00 00
>> >>
>> >> ..??.........
>> >>
>> >> I/bluetoothd( 1072): mgmt_if: [0xffff] command 0x0003 complete: 0x00
>> >>
>> >> D/bluetoothd( 1072):
>> >> external/bluetooth/bluez/android/bluetooth.c:read_index_list_complete()
>> >>
>> >> D/bluetoothd( 1072):
>> >> external/bluetooth/bluez/android/bluetooth.c:read_index_list_complete()
>> >> Number of controllers: 1
>> >>
>> >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0004
>> >>
>> >> I/bluetoothd( 1072): mgmt_if: < 04 00 00 00 00 00
>> >>
>> >> ......
>> >>
>> >> I/bluetoothd( 1072): mgmt_if: > 01 00 00 00 1b 01 04 00 00 e9 36 36 e7
>> >> 18 00 03 .........?66?...
>> >>
>> >> I/bluetoothd( 1072): mgmt_if: 0f 00 bf 10 00 00 90 00 00 00 00 00 00
>> >> 42 43 4d ..?..........BCM
>> >>
>> >> I/bluetoothd( 1072): mgmt_if: 32 30 34 35 42 33 00 00 00 00 00 00 00
>> >> 00 00 00 2045B3..........
>> >>
>> >> I/bluetoothd( 1072): mgmt_if: 00 00 00 00 00 00 00 00 00 00 00 00 00
>> >> 00 00 00 ................
>> >>
>> >> I/bluetoothd( 1072): mgmt_if: 00 00 00 00 00 00 00 00 00 00 00 00 00
>> >> 00 00 00 ................
>> >>
>> >> I/bluetoothd( 1072): mgmt_if: 00 00 00 00 00 00 00 00 00 00 00 00 00
>> >> 00 00 00 ................
>> >>
>> >> I/bluetoothd( 1072): mgmt_if: 00 00 00 00 00 00 00 00 00 00 00 00 00
>> >> 00 00 00 ................
>> >>
>> >> I/bluetoothd( 1072): mgmt_if: 00 00 00 00 00 00 00 00 00 00 00 00 00
>> >> 00 00 00 ................
>> >>
>> >> I/bluetoothd( 1072): mgmt_if: 00 00 00 00 00 00 00 00 00 00 00 00 00
>> >> 00 00 00 ................
>> >>
>> >> I/bluetoothd( 1072): mgmt_if: 00 00 00 00 00 00 00 00 00 00 00 00 00
>> >> 00 00 00 ................
>> >>
>> >> I/bluetoothd( 1072): mgmt_if: 00 00 00 00 00 00 00 00 00 00 00 00 00
>> >> 00 00 00 ................
>> >>
>> >> I/bluetoothd( 1072): mgmt_if: 00 00 00 00 00 00 00 00 00 00 00 00 00
>> >> 00 00 00 ................
>> >>
>> >> I/bluetoothd( 1072): mgmt_if: 00 00 00 00 00 00 00 00 00 00 00 00 00
>> >> 00 00 00 ................
>> >>
>> >> I/bluetoothd( 1072): mgmt_if: 00 00 00 00 00 00 00 00 00 00 00 00 00
>> >> 00 00 00 ................
>> >>
>> >> I/bluetoothd( 1072): mgmt_if: 00 00 00 00 00 00 00 00 00 00 00 00 00
>> >> 00 00 00 ................
>> >>
>> >> I/bluetoothd( 1072): mgmt_if: 00 00 00 00 00 00 00 00 00 00 00 00 00
>> >> 00 00 00 ................
>> >>
>> >> I/bluetoothd( 1072): mgmt_if: 00 00 00 00 00 00 00 00 00 00 00 00 00
>> >> 00 00 00 ................
>> >>
>> >> I/bluetoothd( 1072): mgmt_if: 00 00 00 00 00 00 00 00 00 00 00 00 00
>> >> 00 00 00 ................
>> >>
>> >> I/bluetoothd( 1072): mgmt_if: 00
>> >>
>> >> .
>> >>
>> >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0004 complete: 0x00
>> >>
>> >> D/bluetoothd( 1072):
>> >> external/bluetooth/bluez/android/bluetooth.c:read_info_complete()
>> >>
>> >> D/bluetoothd( 1072):
>> >> external/bluetooth/bluez/src/sdpd-service.c:register_device_id()
>> >> Adding device id record for 0002:1d6b:0247:051c
>> >>
>> >> D/bluetoothd( 1072):
>> >> external/bluetooth/bluez/src/sdpd-service.c:add_record_to_server()
>> >> Adding record with handle 0x10001
>> >>
>> >> D/bluetoothd( 1072):
>> >> external/bluetooth/bluez/src/sdpd-service.c:add_record_to_server()
>> >> Record pattern UUID 00001002-0000-1000-8000-00805f9
>> >>
>> >> D/bluetoothd( 1072):
>> >> external/bluetooth/bluez/src/sdpd-service.c:add_record_to_server()
>> >> Record pattern UUID 0000113a-0000-1000-8000-00805f9
>> >>
>> >> D/bluetoothd( 1072):
>> >> external/bluetooth/bluez/src/sdpd-service.c:add_record_to_server()
>> >> Record pattern UUID 0000113b-0000-1000-8000-00805f9
>> >>
>> >> D/bluetoothd( 1072):
>> >> external/bluetooth/bluez/android/bluetooth.c:load_ltks() ltks 0
>> >>
>> >> D/bluetoothd( 1072):
>> >> external/bluetooth/bluez/android/bluetooth.c:load_irks() irks 0
>> >>
>> >> D/bluetoothd( 1072):
>> >> external/bluetooth/bluez/android/bluetooth.c:load_link_keys() keys 0
>> >>
>> >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x000e
>> >>
>> >> I/bluetoothd( 1072): mgmt_if: < 0e 00 00 00 02 00 02 0c
>> >>
>> >> ........
>> >>
>> >> I/bluetoothd( 1072): mgmt_if: > 01 00 00 00 06 00 0e 00 00 00 00 00
>> >>
>> >> ............
>> >>
>> >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x000e complete: 0x00
>> >>
>> >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0011
>> >>
>> >> I/bluetoothd( 1072): mgmt_if: < 11 00 00 00 10 00 00 00 00 00 00 00 00
>> >> 00 00 00 ................
>> >>
>> >> I/bluetoothd( 1072): mgmt_if: 00 00 00 00 00 00
>> >>
>> >> ......
>> >>
>> >> I/bluetoothd( 1072): mgmt_if: > 01 00 00 00 06 00 11 00 00 00 00 00
>> >>
>> >> ............
>> >>
>> >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0011 complete: 0x00
>> >>
>> >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0034
>> >>
>> >> I/bluetoothd( 1072): mgmt_if: < 34 00 00 00 07 00 00 00 00 00 00 00 00
>> >>
>> >> 4............
>> >>
>> >> I/bluetoothd( 1072): mgmt_if: > 01 00 00 00 0a 00 34 00 00 00 00 00 00
>> >> 00 00 00 ......4.........
>> >>
>> >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0034 complete: 0x00
>> >>
>> >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0018
>> >>
>> >> I/bluetoothd( 1072): mgmt_if: < 18 00 00 00 01 00 01
>> >>
>> >> .......
>> >>
>> >> I/bluetoothd( 1072): mgmt_if: > 01 00 00 00 03 00 18 00 00
>> >>
>> >> .........
>> >>
>> >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0018 complete: 0x00
>> >>
>> >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0028
>> >>
>> >> I/bluetoothd( 1072): mgmt_if: < 28 00 00 00 08 00 02 00 6b 1d 47 02 1c
>> >> 05 (.......k.G...
>> >>
>> >> I/bluetoothd( 1072): mgmt_if: > 01 00 00 00 03 00 28 00 00
>> >>
>> >> ......(..
>> >>
>> >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0028 complete: 0x00
>> >>
>> >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0010
>> >>
>> >> I/bluetoothd( 1072): mgmt_if: < 10 00 00 00 11 00 fb 34 9b 5f 80 00 00
>> >> 80 00 10 ......?4._......
>> >>
>> >> I/bluetoothd( 1072): mgmt_if: 00 00 00 12 00 00 00
>> >>
>> >> .......
>> >>
>> >> I/bluetoothd( 1072): mgmt_if: > 01 00 00 00 06 00 10 00 00 00 00 00
>> >>
>> >> ............
>> >>
>> >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0010 complete: 0x00
>> >>
>> >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0010
>> >>
>> >> I/bluetoothd( 1072): mgmt_if: < 10 00 00 00 11 00 fb 34 9b 5f 80 00 00
>> >> 80 00 10 ......?4._......
>> >>
>> >> I/bluetoothd( 1072): mgmt_if: 00 00 3b 11 00 00 00
>> >>
>> >> ..;....
>> >>
>> >> I/bluetoothd( 1072): mgmt_if: > 01 00 00 00 06 00 10 00 00 00 00 00
>> >>
>> >> ............
>> >>
>> >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0010 complete: 0x00
>> >>
>> >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0013
>> >>
>> >> I/bluetoothd( 1072): mgmt_if: < 13 00 00 00 02 00 00 00
>> >>
>> >> ........
>> >>
>> >> I/bluetoothd( 1072): mgmt_if: > 02 00 00 00 03 00 13 00 0c
>> >>
>> >> .........
>> >>
>> >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x13 status: 0x0c
>> >>
>> >> I/bluetoothd( 1072): Failed to load LTKs: Not Supported (0x0c)
>> >>
>> >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0030
>> >>
>> >> I/bluetoothd( 1072): mgmt_if: < 30 00 00 00 02 00 00 00
>> >>
>> >> 0.......
>> >>
>> >> I/bluetoothd( 1072): mgmt_if: > 02 00 00 00 03 00 30 00 0c
>> >>
>> >> ......0..
>> >>
>> >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x30 status: 0x0c
>> >>
>> >> I/bluetoothd( 1072): Failed to load IRKs: Not Supported (0x0c)
>> >>
>> >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0012
>> >>
>> >> I/bluetoothd( 1072): mgmt_if: < 12 00 00 00 03 00 00 00 00
>> >>
>> >> .........
>> >>
>> >> I/bluetoothd( 1072): mgmt_if: > 01 00 00 00 03 00 12 00 00
>> >>
>> >> .........
>> >>
>> >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0012 complete: 0x00
>> >>
>> >> D/bluetoothd( 1072):
>> >> external/bluetooth/bluez/android/bluetooth.c:load_link_keys_complete()
>> >> status 0
>> >>
>> >> I/bluetoothd( 1072): Adapter initialized
>> >>
>> >> D/bluetoothd( 1072):
>> >> external/bluetooth/bluez/android/ipc.c:cmd_connect_cb()
>> >>
>> >> E/bluetoothd( 1072): IPC: command socket connect failed
>> >>
>> >> I/bluetoothd( 1072): Switching controller off
>> >>
>> >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0005
>> >>
>> >> I/bluetoothd( 1072): mgmt_if: < 05 00 00 00 01 00 00
>> >>
>> >> .......
>> >>
>> >> I/bluetoothd( 1072): mgmt_if: > 01 00 00 00 07 00 05 00 00 90 00 00 00
>> >>
>> >> .............
>> >>
>> >> I/bluetoothd( 1072): mgmt_if: [0x0000] command 0x0005 complete: 0x00
>> >>
>> >> D/bluetoothd( 1072):
>> >> external/bluetooth/bluez/android/main.c:cleanup_services()
>> >>
>> >> I/bluetoothd( 1072): Stopping SDP server
>> >>
>> >> I/bluetoothd( 1072): Exit
>> >
>> > This log looks OK. Adapter was found and initialized. Only problem is that
>> > there was no IPC socket listening for it to connect.
>> >
>> > On Android bluetoothd is not suppose to be started 'by hand'. It needs to
>> > be started as service defined in init.rc (check android/README and
>> > android/init.bluetooth.rc). This service is started via
>> > bluetooth.default.so provided by BlueZ (this is implementation ofn
>> > Android Bluetooth HAL interface). When bluetoothd starts and initializes
>> > adapter it tries to connect IPC to this library. If lib is not loaded
>> > (and there is no socket to connect to) bluetoothd shuts down.
>> >
>> > This library is loaded by Android Framework and when you enable BT from UI
>> > lib will be initialized and daemon will be started. Other option for
>> > testing is our test tool called haltest. This is command line tool that
>> > will load bt lib and allow you to play with bt stack (this tool doesn't
>> > use Android Framework).>
>> > So what you should check:
>> > - you have init.bluetooth.rc in /
>> > - this file is included from your board init.foo.rc file
>> > - daemon and bluetooth.default.so are installed on system (this should be
>> >
>> > handled just fine by Android.mk provided by BlueZ)
>> >
>> > - you don't need hciattach service - this is not needed with btusb
>> >
>> > --
>> > Szymon K. Janc
>> > [email protected]
>
> --
> Szymon K. Janc
> [email protected]
--
Keith Conger
keith DOT conger AT gmail DOT com
http://thecongers.org