Hi All,
I got HoG key board, I scan and connect with bluez-5.35 it works fine.
But after reboot of the pc, whenever i pressed key i dont see the key
reaching to pc. I need to scan it agian and connect.
Le me know how can I make it to work.
Directed advertisement from hcidump.
> HCI Event: LE Meta Event (0x3e) plen 12
LE Advertising Report
ADV_DIRECT_IND - Connectable directed advertising (1)
bdaddr 61:99:5B:00:15:10 (Public)
RSSI: -70
Many Thanks,
Prabhu
Hi Luiz,
On Thu, Nov 5, 2015 at 3:35 PM, Luiz Augusto von Dentz
<[email protected]> wrote:
> Hi Prabhu,
>
> On Thu, Nov 5, 2015 at 11:09 AM, Prabhu Chawandi <[email protected]> wrote:
>> Hi All,
>>
>> I got HoG key board, I scan and connect with bluez-5.35 it works fine.
>>
>> But after reboot of the pc, whenever i pressed key i dont see the key
>> reaching to pc. I need to scan it agian and connect.
>>
>> Le me know how can I make it to work.
>>
>> Directed advertisement from hcidump.
>>> HCI Event: LE Meta Event (0x3e) plen 12
>> LE Advertising Report
>> ADV_DIRECT_IND - Connectable directed advertising (1)
>> bdaddr 61:99:5B:00:15:10 (Public)
>> RSSI: -70
>
> Is bluetoothd running at this point? Im asking this because bluetoothd
> needs to program the addresses for passive scanning to auto connect,
> or in case your kernel (3.17 >) don't support passive scanning then
> bluetoothd would be doing active scanning.
>
>
> --
Bluetoothd is running. My kernel version is 3.18.100 its fedora
20... Do you want me to run later version of Kernel ? Please let me
know version passive scanning is supposed to work ? I will try
updating kernel in that case.
> Luiz Augusto von Dentz
Hi Prabhu,
On Thu, Nov 5, 2015 at 11:09 AM, Prabhu Chawandi <[email protected]> wrote:
> Hi All,
>
> I got HoG key board, I scan and connect with bluez-5.35 it works fine.
>
> But after reboot of the pc, whenever i pressed key i dont see the key
> reaching to pc. I need to scan it agian and connect.
>
> Le me know how can I make it to work.
>
> Directed advertisement from hcidump.
>> HCI Event: LE Meta Event (0x3e) plen 12
> LE Advertising Report
> ADV_DIRECT_IND - Connectable directed advertising (1)
> bdaddr 61:99:5B:00:15:10 (Public)
> RSSI: -70
Is bluetoothd running at this point? Im asking this because bluetoothd
needs to program the addresses for passive scanning to auto connect,
or in case your kernel (3.17 >) don't support passive scanning then
bluetoothd would be doing active scanning.
--
Luiz Augusto von Dentz