From: Max Chou <[email protected]>
Add the support for RTL8852C BT controller on USB interface.
The necessary firmware file will be submitted to linux-firmware.
Signed-off-by: Max Chou <[email protected]>
---
drivers/bluetooth/btrtl.c | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/drivers/bluetooth/btrtl.c b/drivers/bluetooth/btrtl.c
index 481d488bca0f..47c28fd8f006 100644
--- a/drivers/bluetooth/btrtl.c
+++ b/drivers/bluetooth/btrtl.c
@@ -50,6 +50,7 @@ enum btrtl_chip_id {
CHIP_ID_8761B,
CHIP_ID_8852A = 18,
CHIP_ID_8852B = 20,
+ CHIP_ID_8852C = 25,
};
struct id_table {
@@ -196,6 +197,14 @@ static const struct id_table ic_id_table[] = {
.has_msft_ext = true,
.fw_name = "rtl_bt/rtl8852bu_fw.bin",
.cfg_name = "rtl_bt/rtl8852bu_config" },
+
+ /* 8852C */
+ { IC_INFO(RTL_ROM_LMP_8852A, 0xc, 0xc, HCI_USB),
+ .config_needed = false,
+ .has_rom_version = true,
+ .has_msft_ext = true,
+ .fw_name = "rtl_bt/rtl8852cu_fw.bin",
+ .cfg_name = "rtl_bt/rtl8852cu_config" },
};
static const struct id_table *btrtl_match_ic(u16 lmp_subver, u16 hci_rev,
@@ -305,6 +314,7 @@ static int rtlbt_parse_firmware(struct hci_dev *hdev,
{ RTL_ROM_LMP_8761A, 14 }, /* 8761B */
{ RTL_ROM_LMP_8852A, 18 }, /* 8852A */
{ RTL_ROM_LMP_8852A, 20 }, /* 8852B */
+ { RTL_ROM_LMP_8852A, 25 }, /* 8852C */
};
min_size = sizeof(struct rtl_epatch_header) + sizeof(extension_sig) + 3;
@@ -768,6 +778,7 @@ void btrtl_set_quirks(struct hci_dev *hdev, struct btrtl_device_info *btrtl_dev)
case CHIP_ID_8822C:
case CHIP_ID_8852A:
case CHIP_ID_8852B:
+ case CHIP_ID_8852C:
set_bit(HCI_QUIRK_VALID_LE_STATES, &hdev->quirks);
set_bit(HCI_QUIRK_WIDEBAND_SPEECH_SUPPORTED, &hdev->quirks);
hci_set_aosp_capable(hdev);
@@ -947,3 +958,5 @@ MODULE_FIRMWARE("rtl_bt/rtl8852au_fw.bin");
MODULE_FIRMWARE("rtl_bt/rtl8852au_config.bin");
MODULE_FIRMWARE("rtl_bt/rtl8852bu_fw.bin");
MODULE_FIRMWARE("rtl_bt/rtl8852bu_config.bin");
+MODULE_FIRMWARE("rtl_bt/rtl8852cu_fw.bin");
+MODULE_FIRMWARE("rtl_bt/rtl8852cu_config.bin");
--
2.17.1
This is automated email and please do not reply to this email!
Dear submitter,
Thank you for submitting the patches to the linux bluetooth mailing list.
This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=630976
---Test result---
Test Summary:
CheckPatch PASS 1.75 seconds
GitLint PASS 0.99 seconds
SubjectPrefix PASS 0.82 seconds
BuildKernel PASS 41.54 seconds
BuildKernel32 PASS 36.68 seconds
Incremental Build with patchesPASS 49.60 seconds
TestRunner: Setup PASS 603.24 seconds
TestRunner: l2cap-tester PASS 19.03 seconds
TestRunner: bnep-tester PASS 7.62 seconds
TestRunner: mgmt-tester PASS 125.70 seconds
TestRunner: rfcomm-tester PASS 9.83 seconds
TestRunner: sco-tester PASS 9.83 seconds
TestRunner: smp-tester PASS 9.68 seconds
TestRunner: userchan-tester PASS 7.88 seconds
---
Regards,
Linux Bluetooth
Hello:
This patch was applied to bluetooth/bluetooth-next.git (master)
by Marcel Holtmann <[email protected]>:
On Mon, 11 Apr 2022 17:19:57 +0800 you wrote:
> From: Max Chou <[email protected]>
>
> Add the support for RTL8852C BT controller on USB interface.
> The necessary firmware file will be submitted to linux-firmware.
>
> Signed-off-by: Max Chou <[email protected]>
>
> [...]
Here is the summary with links:
- Bluetooth: btrtl: Add support for RTL8852C
https://git.kernel.org/bluetooth/bluetooth-next/c/9ee4dddbad1e
You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html