From: Bartosz Golaszewski <[email protected]>
With the introduction of PCI device power control drivers that will be
able to trigger the port rescan when probing, we need to hold the rescan
mutex during the initial pci_host_probe() too or the two could get in
each other's way.
Signed-off-by: Bartosz Golaszewski <[email protected]>
---
drivers/pci/probe.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index 1325fbae2f28..1802900328a0 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -3066,7 +3066,9 @@ int pci_host_probe(struct pci_host_bridge *bridge)
struct pci_bus *bus, *child;
int ret;
+ pci_lock_rescan_remove();
ret = pci_scan_root_bus_bridge(bridge);
+ pci_unlock_rescan_remove();
if (ret < 0) {
dev_err(bridge->dev.parent, "Scanning root bridge failed");
return ret;
--
2.40.1