Hi all,
I'm trying out this Billionton dongle (CSR-based, class 1), and it's
curious that:
Name: 'James-1711....' (I guess James what one of the developers)
Class: 0x000000
HCI Ver: 1.1 (0x1) HCI Rev: 0x460 LMP Ver: 1.1 (0x1) LMP Subver: 0x460
The problem is that when I start hcid, it doesn't configure the dongle
with the values in hcid.conf, but the ones above. I've tried various
combinations of inserting, then starting hcid, having hcid running then
insert, etc.
Can anyone give me an insight as to why this is happening? How can I get
the dongle to init with the right settings?
Regards,
Mike
-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
for problems? Stop! Download the new AJAX search engine that makes
searching your log files as easy as surfing the web. DOWNLOAD SPLUNK!
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=103432&bid=230486&dat=121642
_______________________________________________
Bluez-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-devel
Marcel Holtmann wrote:
>> HCI Ver: 1.1 (0x1) HCI Rev: 0x460 LMP Ver: 1.1 (0x1) LMP Subver: 0x460
>
> are you sure this is a CSR dongle? The build id is a little bit too high
> for a Bluetooth 1.1 dongle from CSR.
The build ID looks fine. It's a BlueCore3-ROM part with 17.11 firmware.
It is 1.1 only. The full firmware ID is:
bc3n_4hci_bt1.1_17.11_encr128_nodfu_nopsfl_special_ghostbat
and it was released on 7 January 2004.
- Steven
--
To access the latest news from CSR copy this link into a web browser: http://www.csr.com/email_sig.html
-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
for problems? Stop! Download the new AJAX search engine that makes
searching your log files as easy as surfing the web. DOWNLOAD SPLUNK!
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=103432&bid=230486&dat=121642
_______________________________________________
Bluez-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-devel
Hi Marcel,
Thanks for your input - I have the dongle out of plastics, and will be
lifting the RF shield off today, this will tell for sure.
Hcid is running fine now, I have found that if I boot with the dongle
inserted, all goes well, I'll investigate a bit further with your
suggestion.
Best regards,
Mike
> -----Mensaje original-----
> De: [email protected]
> [mailto:[email protected]] En nombre de
> Marcel Holtmann
> Enviado el: viernes, 20 de enero de 2006 2:15
> Para: [email protected]
> Asunto: Re: [Bluez-devel] Dongle with a strange configuration
>
> Hi Mike,
>
> > I'm trying out this Billionton dongle (CSR-based, class 1),
> and it's
> > curious that:
> >
> > Name: 'James-1711....' (I guess James what one of the developers)
> > Class: 0x000000
> > HCI Ver: 1.1 (0x1) HCI Rev: 0x460 LMP Ver: 1.1 (0x1) LMP
> Subver: 0x460
>
> are you sure this is a CSR dongle? The build id is a little
> bit too high for a Bluetooth 1.1 dongle from CSR.
>
> > The problem is that when I start hcid, it doesn't configure
> the dongle
> > with the values in hcid.conf, but the ones above. I've
> tried various
> > combinations of inserting, then starting hcid, having hcid running
> > then insert, etc.
> >
> > Can anyone give me an insight as to why this is happening?
> How can I
> > get the dongle to init with the right settings?
>
> Run "hcidump -X -V" before you start hcid and look out what
> it tells you.
>
> Regards
>
> Marcel
>
>
>
>
> -------------------------------------------------------
> This SF.net email is sponsored by: Splunk Inc. Do you grep
> through log files for problems? Stop! Download the new AJAX
> search engine that makes searching your log files as easy as
> surfing the web. DOWNLOAD SPLUNK!
> http://sel.as-us.falkag.net/sel?cmd=lnk&kid=103432&bid=230486&
dat=121642
> _______________________________________________
> Bluez-devel mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/bluez-devel
>
-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
for problems? Stop! Download the new AJAX search engine that makes
searching your log files as easy as surfing the web. DOWNLOAD SPLUNK!
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=103432&bid=230486&dat=121642
_______________________________________________
Bluez-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-devel
Hi Mike,
> I'm trying out this Billionton dongle (CSR-based, class 1), and it's
> curious that:
>
> Name: 'James-1711....' (I guess James what one of the developers)
> Class: 0x000000
> HCI Ver: 1.1 (0x1) HCI Rev: 0x460 LMP Ver: 1.1 (0x1) LMP Subver: 0x460
are you sure this is a CSR dongle? The build id is a little bit too high
for a Bluetooth 1.1 dongle from CSR.
> The problem is that when I start hcid, it doesn't configure the dongle
> with the values in hcid.conf, but the ones above. I've tried various
> combinations of inserting, then starting hcid, having hcid running then
> insert, etc.
>
> Can anyone give me an insight as to why this is happening? How can I get
> the dongle to init with the right settings?
Run "hcidump -X -V" before you start hcid and look out what it tells
you.
Regards
Marcel
-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
for problems? Stop! Download the new AJAX search engine that makes
searching your log files as easy as surfing the web. DOWNLOAD SPLUNK!
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=103432&bid=230486&dat=121642
_______________________________________________
Bluez-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-devel