I'm trying to install a csr bc02 board under linux, but I'm having no
success!! All modules were installed! My hciattach command get a
successfull message :
[root@goodman root]# hciattach -t 20 ttyS0 csr 115200 flow
CSR build ID 0x02-0xC1
[root@goodman root]# hciconfig
hci0: Type: UART
BD Address: 00:00:00:00:00:00 ACL MTU: 0:0 SCO MTU: 0:0
DOWN
RX bytes:0 acl:0 sco:0 events:0 errors:0
TX bytes:0 acl:0 sco:0 commands:0 errors:0
But when I try to put module to up status, it didn't work at all!
And send me this message:
[root@goodman root]# hciconfig hci0 up
Can't init device hci0. Connection timed out(110)
Someone could help me?!?
Thanks in advance!!
Daniel Moraes, directly from Brasil!
-------------------------------------------------------
SF.Net is sponsored by: Speed Start Your Linux Apps Now.
Build and deploy apps & Web services for Linux with
a free DVD software kit from IBM. Click Now!
http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users