I have tried to get Internet access working from my Dell LATITUDE D800 (Suse
9.2) via "Dial Up Networking" over Bluetooth and GPRS (Sony Ericsson S700i).
I have basically followed the instructions in the article "Linux : Net Access
with Bluetooth and GPRS" at
http://www.pcquest.com/content/linux/2004/104050807.asp.
I actually got it working once but now I can't get it up and running again.
See error messages from the "wvdial GPRS" command below.
File transfer over Bluetooth works "out of the box" in both directions so
basic setup seems to be ok.
I have tried to get a clue by reading old postings to this maillist but I seem
to miss something.
Below I have added configuration information as I understand is of importance.
Please advice me on what to change to get it up and running again!
Thanks in advance!
linux:~ # sdptool search --bdaddr 00:0F:DE:0B:A0:F5 DUN
Searching for DUN on 00:0F:DE:0B:A0:F5 ...
Service Name: Dial-up Networking
Service RecHandle: 0x10000
Service Class ID List:
"Dialup Networking" (0x1103)
"Generic Networking" (0x1201)
Protocol Descriptor List:
"L2CAP" (0x0100)
"RFCOMM" (0x0003)
Channel: 1
Profile Descriptor List:
"Dialup Networking" (0x1103)
Version: 0x0100
linux:~ # rfcomm bind 0 00:0F:DE:0B:A0:F5 1
linux:~ # more /etc/wvdial.conf
[Modem0]
Modem = /dev/rfcomm0
Baud = 57600
SetVolume = 0
Dial Command = ATDT
Init1 = ATZ
Init3 = ATM0
FlowControl = None
[Dialer GPRS]
Username = user
Password = user
Phone = ATD*99#
Stupid Mode = 1
Inherits = Modem0
linux:~ # wvdial GPRS
--> WvDial: Internet dialer version 1.54.0
--> Cannot open /dev/rfcomm0: Connection refused
--> Cannot open /dev/rfcomm0: Connection refused
--> Cannot open /dev/rfcomm0: Connection refused
linux:~ # hcidump
(from the failing "wvdial GPRS" command)
HCIDump - HCI packet analyzer ver 1.11
device: hci0 snap_len: 1028 filter: 0xffffffff
< HCI Command: Create Connection (0x01|0x0005) plen 13
> HCI Event: Command Status (0x0f) plen 4
> HCI Event: Connect Complete (0x03) plen 11
< ACL data: handle 0x002e flags 0x02 dlen 12
L2CAP(s): Connect req: psm 3 scid 0x0040
< HCI Command: Write Link Policy Settings (0x02|0x000d) plen 4
> HCI Event: Number of Completed Packets (0x13) plen 5
> HCI Event: Command Complete (0x0e) plen 6
> HCI Event: Max Slots Change (0x1b) plen 3
> ACL data: handle 0x002e flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0048 scid 0x0040 result 0 status 0
< ACL data: handle 0x002e flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0048 flags 0x0000 clen 4
MTU 1024
> HCI Event: Number of Completed Packets (0x13) plen 5
> ACL data: handle 0x002e flags 0x02 dlen 18
L2CAP(s): Config rsp: scid 0x0040 flags 0x0000 result 0 clen 4
MTU 674
> ACL data: handle 0x002e flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0040 flags 0x0000 clen 4
MTU 674
< ACL data: handle 0x002e flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0048 flags 0x0000 result 0 clen 0
< ACL data: handle 0x002e flags 0x02 dlen 8
L2CAP(d): cid 0x0048 len 4 [psm 3]
RFCOMM(s): SABM: cr 1 dlci 0 pf 1 ilen 0 fcs 0x1c
> HCI Event: Number of Completed Packets (0x13) plen 5
> HCI Event: Number of Completed Packets (0x13) plen 5
> ACL data: handle 0x002e flags 0x02 dlen 8
L2CAP(d): cid 0x0040 len 4 [psm 3]
RFCOMM(s): UA: cr 1 dlci 0 pf 1 ilen 0 fcs 0xd7
< ACL data: handle 0x002e flags 0x02 dlen 18
L2CAP(d): cid 0x0048 len 14 [psm 3]
RFCOMM(s): PN CMD: cr 1 dlci 0 pf 0 ilen 10 fcs 0x70 mcc_len 8
dlci 2 frame_type 0 credit_flow 15 pri 7 ack_timer 0
frame_size 669 max_retrans 0 credits 7
> HCI Event: Number of Completed Packets (0x13) plen 5
> ACL data: handle 0x002e flags 0x02 dlen 19
L2CAP(d): cid 0x0040 len 15 [psm 3]
RFCOMM(s): PN RSP: cr 0 dlci 0 pf 0 ilen 10 fcs 0xaa mcc_len 8
dlci 2 frame_type 0 credit_flow 14 pri 7 ack_timer 0
frame_size 330 max_retrans 0 credits 7
< ACL data: handle 0x002e flags 0x02 dlen 8
L2CAP(d): cid 0x0048 len 4 [psm 3]
RFCOMM(s): SABM: cr 1 dlci 2 pf 1 ilen 0 fcs 0x59
> HCI Event: Number of Completed Packets (0x13) plen 5
> HCI Event: Link Key Request (0x17) plen 6
< HCI Command: Link Key Request Reply (0x01|0x000b) plen 22
> HCI Event: Command Complete (0x0e) plen 10
> ACL data: handle 0x002e flags 0x02 dlen 8
L2CAP(d): cid 0x0040 len 4 [psm 3]
RFCOMM(s): DM: cr 1 dlci 2 pf 1 ilen 0 fcs 0x73
< ACL data: handle 0x002e flags 0x02 dlen 8
L2CAP(d): cid 0x0048 len 4 [psm 3]
RFCOMM(s): DISC: cr 1 dlci 0 pf 1 ilen 0 fcs 0xfd
< ACL data: handle 0x002e flags 0x02 dlen 12
L2CAP(s): Disconn req: dcid 0x0048 scid 0x0040
< ACL data: handle 0x002e flags 0x02 dlen 12
L2CAP(s): Connect req: psm 3 scid 0x0041
> HCI Event: Number of Completed Packets (0x13) plen 5
> HCI Event: Number of Completed Packets (0x13) plen 5
> HCI Event: Number of Completed Packets (0x13) plen 5
> ACL data: handle 0x002e flags 0x02 dlen 8
L2CAP(d): cid 0x0040 len 4 [psm 3]
RFCOMM(s): UA: cr 1 dlci 0 pf 1 ilen 0 fcs 0xd7
> ACL data: handle 0x002e flags 0x02 dlen 12
L2CAP(s): Disconn rsp: dcid 0x0048 scid 0x0040
> ACL data: handle 0x002e flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0049 scid 0x0041 result 0 status 0
< ACL data: handle 0x002e flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0049 flags 0x0000 clen 4
MTU 1024
> HCI Event: Number of Completed Packets (0x13) plen 5
> ACL data: handle 0x002e flags 0x02 dlen 18
L2CAP(s): Config rsp: scid 0x0041 flags 0x0000 result 0 clen 4
MTU 674
> ACL data: handle 0x002e flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0041 flags 0x0000 clen 4
MTU 674
< ACL data: handle 0x002e flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0049 flags 0x0000 result 0 clen 0
< ACL data: handle 0x002e flags 0x02 dlen 8
L2CAP(d): cid 0x0049 len 4 [psm 3]
RFCOMM(s): SABM: cr 1 dlci 0 pf 1 ilen 0 fcs 0x1c
> HCI Event: Number of Completed Packets (0x13) plen 5
> HCI Event: Number of Completed Packets (0x13) plen 5
> ACL data: handle 0x002e flags 0x02 dlen 8
L2CAP(d): cid 0x0041 len 4 [psm 3]
RFCOMM(s): UA: cr 1 dlci 0 pf 1 ilen 0 fcs 0xd7
< ACL data: handle 0x002e flags 0x02 dlen 18
L2CAP(d): cid 0x0049 len 14 [psm 3]
RFCOMM(s): PN CMD: cr 1 dlci 0 pf 0 ilen 10 fcs 0x70 mcc_len 8
dlci 2 frame_type 0 credit_flow 15 pri 7 ack_timer 0
frame_size 669 max_retrans 0 credits 7
> HCI Event: Number of Completed Packets (0x13) plen 5
> ACL data: handle 0x002e flags 0x02 dlen 19
L2CAP(d): cid 0x0041 len 15 [psm 3]
RFCOMM(s): PN RSP: cr 0 dlci 0 pf 0 ilen 10 fcs 0xaa mcc_len 8
dlci 2 frame_type 0 credit_flow 14 pri 7 ack_timer 0
frame_size 330 max_retrans 0 credits 7
< ACL data: handle 0x002e flags 0x02 dlen 8
L2CAP(d): cid 0x0049 len 4 [psm 3]
RFCOMM(s): SABM: cr 1 dlci 2 pf 1 ilen 0 fcs 0x59
> HCI Event: Number of Completed Packets (0x13) plen 5
> ACL data: handle 0x002e flags 0x02 dlen 8
L2CAP(d): cid 0x0041 len 4 [psm 3]
RFCOMM(s): DM: cr 1 dlci 2 pf 1 ilen 0 fcs 0x73
< ACL data: handle 0x002e flags 0x02 dlen 8
L2CAP(d): cid 0x0049 len 4 [psm 3]
RFCOMM(s): DISC: cr 1 dlci 0 pf 1 ilen 0 fcs 0xfd
< ACL data: handle 0x002e flags 0x02 dlen 12
L2CAP(s): Disconn req: dcid 0x0049 scid 0x0041
< ACL data: handle 0x002e flags 0x02 dlen 12
L2CAP(s): Connect req: psm 3 scid 0x0040
> HCI Event: Number of Completed Packets (0x13) plen 5
> HCI Event: Number of Completed Packets (0x13) plen 5
> ACL data: handle 0x002e flags 0x02 dlen 8
L2CAP(d): cid 0x0041 len 4 [psm 3]
RFCOMM(s): UA: cr 1 dlci 0 pf 1 ilen 0 fcs 0xd7
> HCI Event: Number of Completed Packets (0x13) plen 5
> ACL data: handle 0x002e flags 0x02 dlen 12
L2CAP(s): Disconn rsp: dcid 0x0049 scid 0x0041
> ACL data: handle 0x002e flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x004a scid 0x0040 result 0 status 0
< ACL data: handle 0x002e flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x004a flags 0x0000 clen 4
MTU 1024
> HCI Event: Number of Completed Packets (0x13) plen 5
> ACL data: handle 0x002e flags 0x02 dlen 18
L2CAP(s): Config rsp: scid 0x0040 flags 0x0000 result 0 clen 4
MTU 674
> ACL data: handle 0x002e flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0040 flags 0x0000 clen 4
MTU 674
< ACL data: handle 0x002e flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x004a flags 0x0000 result 0 clen 0
< ACL data: handle 0x002e flags 0x02 dlen 8
L2CAP(d): cid 0x004a len 4 [psm 3]
RFCOMM(s): SABM: cr 1 dlci 0 pf 1 ilen 0 fcs 0x1c
> HCI Event: Number of Completed Packets (0x13) plen 5
> HCI Event: Number of Completed Packets (0x13) plen 5
> ACL data: handle 0x002e flags 0x02 dlen 8
L2CAP(d): cid 0x0040 len 4 [psm 3]
RFCOMM(s): UA: cr 1 dlci 0 pf 1 ilen 0 fcs 0xd7
< ACL data: handle 0x002e flags 0x02 dlen 18
L2CAP(d): cid 0x004a len 14 [psm 3]
RFCOMM(s): PN CMD: cr 1 dlci 0 pf 0 ilen 10 fcs 0x70 mcc_len 8
dlci 2 frame_type 0 credit_flow 15 pri 7 ack_timer 0
frame_size 669 max_retrans 0 credits 7
> HCI Event: Number of Completed Packets (0x13) plen 5
> ACL data: handle 0x002e flags 0x02 dlen 19
L2CAP(d): cid 0x0040 len 15 [psm 3]
RFCOMM(s): PN RSP: cr 0 dlci 0 pf 0 ilen 10 fcs 0xaa mcc_len 8
dlci 2 frame_type 0 credit_flow 14 pri 7 ack_timer 0
frame_size 330 max_retrans 0 credits 7
< ACL data: handle 0x002e flags 0x02 dlen 8
L2CAP(d): cid 0x004a len 4 [psm 3]
RFCOMM(s): SABM: cr 1 dlci 2 pf 1 ilen 0 fcs 0x59
> HCI Event: Number of Completed Packets (0x13) plen 5
> ACL data: handle 0x002e flags 0x02 dlen 8
L2CAP(d): cid 0x0040 len 4 [psm 3]
RFCOMM(s): DM: cr 1 dlci 2 pf 1 ilen 0 fcs 0x73
< ACL data: handle 0x002e flags 0x02 dlen 8
L2CAP(d): cid 0x004a len 4 [psm 3]
RFCOMM(s): DISC: cr 1 dlci 0 pf 1 ilen 0 fcs 0xfd
< ACL data: handle 0x002e flags 0x02 dlen 12
L2CAP(s): Disconn req: dcid 0x004a scid 0x0040
> HCI Event: Number of Completed Packets (0x13) plen 5
> HCI Event: Number of Completed Packets (0x13) plen 5
> ACL data: handle 0x002e flags 0x02 dlen 8
L2CAP(d): cid 0x0040 len 4 [psm 3]
RFCOMM(s): UA: cr 1 dlci 0 pf 1 ilen 0 fcs 0xd7
> ACL data: handle 0x002e flags 0x02 dlen 12
L2CAP(s): Disconn rsp: dcid 0x004a scid 0x0040
< HCI Command: Disconnect (0x01|0x0006) plen 3
> HCI Event: Command Status (0x0f) plen 4
> HCI Event: Disconn Complete (0x05) plen 4
--
Magnus Larsson
Callista Enterprise AB
Phone: +46 733 51 91 72
http://www.callista.se/Enterprise/
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
Hi Magnus,
> Can someone help me to describe what the HCIDUMP in the end of this message
> says is wrong?
>
> Does anyone have a URL to some doc that explain the HCIDUMP output?
install the latest hcidump and use the options "-X -V" which give you a
better hex/ASCII dump and the verbose decoding.
> I think the following part is of interest (see below for the full hcidump -
> output):
>
> > ACL data: handle 0x002e flags 0x02 dlen 8
> L2CAP(d): cid 0x0040 len 4 [psm 3]
> RFCOMM(s): DM: cr 1 dlci 2 pf 1 ilen 0 fcs 0x73
> < ACL data: handle 0x002e flags 0x02 dlen 8
> L2CAP(d): cid 0x0048 len 4 [psm 3]
> RFCOMM(s): DISC: cr 1 dlci 0 pf 1 ilen 0 fcs 0xfd
The more important one is the data packet before it. It tells you for
what command the DM is send:
< ACL data: handle 0x002e flags 0x02 dlen 8
L2CAP(d): cid 0x004a len 4 [psm 3]
RFCOMM(s): SABM: cr 1 dlci 2 pf 1 ilen 0 fcs 0x59
This means that you tried to open RFCOMM channel 1 and with the DM the
phone tells you that it won't create it. So you better check your phone
why it is not accepting a connection on this channel.
The DISC is not for channel 1 (DLCI 2). It is for DLCI 0 which is the
signal channel.
Regards
Marcel
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
Hello Magnus
Is this already hcidump 2.15? If not, I suggest to use it because it
supports "human readable" output. Maybee it will be better
understandable (if this isn't yet "human readable" :-)).
Another option is to use the bluetooth specification. I read once in the
list that the values are defined there...
regards
Marco
Magnus Larsson wrote:
> Can someone help me to describe what the HCIDUMP in the end of this message
> says is wrong?
>
> Does anyone have a URL to some doc that explain the HCIDUMP output?
>
> I think the following part is of interest (see below for the full hcidump -
> output):
>
>
>>ACL data: handle 0x002e flags 0x02 dlen 8
>
> L2CAP(d): cid 0x0040 len 4 [psm 3]
> RFCOMM(s): DM: cr 1 dlci 2 pf 1 ilen 0 fcs 0x73
> < ACL data: handle 0x002e flags 0x02 dlen 8
> L2CAP(d): cid 0x0048 len 4 [psm 3]
> RFCOMM(s): DISC: cr 1 dlci 0 pf 1 ilen 0 fcs 0xfd
>
> Regards,
> Magnus.
>
> On Sunday 10 April 2005 00:32, Magnus Larsson wrote:
>
>>I have tried to get Internet access working from my Dell LATITUDE D800
>>(Suse 9.2) via "Dial Up Networking" over Bluetooth and GPRS (Sony Ericsson
>>S700i).
>>
>>I have basically followed the instructions in the article "Linux : Net
>>Access with Bluetooth and GPRS" at
>>http://www.pcquest.com/content/linux/2004/104050807.asp.
>>
>>I actually got it working once but now I can't get it up and running again.
>>See error messages from the "wvdial GPRS" command below.
>>
>>File transfer over Bluetooth works "out of the box" in both directions so
>>basic setup seems to be ok.
>>
>>I have tried to get a clue by reading old postings to this maillist but I
>>seem to miss something.
>>
>>Below I have added configuration information as I understand is of
>>importance.
>>
>>Please advice me on what to change to get it up and running again!
>>Thanks in advance!
>>
>>
>>linux:~ # sdptool search --bdaddr 00:0F:DE:0B:A0:F5 DUN
>>
>>Searching for DUN on 00:0F:DE:0B:A0:F5 ...
>>Service Name: Dial-up Networking
>>Service RecHandle: 0x10000
>>Service Class ID List:
>> "Dialup Networking" (0x1103)
>> "Generic Networking" (0x1201)
>>Protocol Descriptor List:
>> "L2CAP" (0x0100)
>> "RFCOMM" (0x0003)
>> Channel: 1
>>Profile Descriptor List:
>> "Dialup Networking" (0x1103)
>> Version: 0x0100
>>
>>
>>linux:~ # rfcomm bind 0 00:0F:DE:0B:A0:F5 1
>>
>>
>>linux:~ # more /etc/wvdial.conf
>>
>>[Modem0]
>>Modem = /dev/rfcomm0
>>Baud = 57600
>>SetVolume = 0
>>Dial Command = ATDT
>>Init1 = ATZ
>>Init3 = ATM0
>>FlowControl = None
>>[Dialer GPRS]
>>Username = user
>>Password = user
>>Phone = ATD*99#
>>Stupid Mode = 1
>>Inherits = Modem0
>>
>>
>>linux:~ # wvdial GPRS
>>
>>--> WvDial: Internet dialer version 1.54.0
>>--> Cannot open /dev/rfcomm0: Connection refused
>>--> Cannot open /dev/rfcomm0: Connection refused
>>--> Cannot open /dev/rfcomm0: Connection refused
>>
>>
>>linux:~ # hcidump
>>(from the failing "wvdial GPRS" command)
>>
>>HCIDump - HCI packet analyzer ver 1.11
>>device: hci0 snap_len: 1028 filter: 0xffffffff
>>< HCI Command: Create Connection (0x01|0x0005) plen 13
>>
>>
>>>HCI Event: Command Status (0x0f) plen 4
>>>HCI Event: Connect Complete (0x03) plen 11
>>
>>< ACL data: handle 0x002e flags 0x02 dlen 12
>> L2CAP(s): Connect req: psm 3 scid 0x0040
>>< HCI Command: Write Link Policy Settings (0x02|0x000d) plen 4
>>
>>
>>>HCI Event: Number of Completed Packets (0x13) plen 5
>>>HCI Event: Command Complete (0x0e) plen 6
>>>HCI Event: Max Slots Change (0x1b) plen 3
>>>ACL data: handle 0x002e flags 0x02 dlen 16
>>
>> L2CAP(s): Connect rsp: dcid 0x0048 scid 0x0040 result 0 status 0
>>< ACL data: handle 0x002e flags 0x02 dlen 16
>> L2CAP(s): Config req: dcid 0x0048 flags 0x0000 clen 4
>> MTU 1024
>>
>>
>>>HCI Event: Number of Completed Packets (0x13) plen 5
>>>ACL data: handle 0x002e flags 0x02 dlen 18
>>
>> L2CAP(s): Config rsp: scid 0x0040 flags 0x0000 result 0 clen 4
>> MTU 674
>>
>>
>>>ACL data: handle 0x002e flags 0x02 dlen 16
>>
>> L2CAP(s): Config req: dcid 0x0040 flags 0x0000 clen 4
>> MTU 674
>>< ACL data: handle 0x002e flags 0x02 dlen 14
>> L2CAP(s): Config rsp: scid 0x0048 flags 0x0000 result 0 clen 0
>>< ACL data: handle 0x002e flags 0x02 dlen 8
>> L2CAP(d): cid 0x0048 len 4 [psm 3]
>> RFCOMM(s): SABM: cr 1 dlci 0 pf 1 ilen 0 fcs 0x1c
>>
>>
>>>HCI Event: Number of Completed Packets (0x13) plen 5
>>>HCI Event: Number of Completed Packets (0x13) plen 5
>>>ACL data: handle 0x002e flags 0x02 dlen 8
>>
>> L2CAP(d): cid 0x0040 len 4 [psm 3]
>> RFCOMM(s): UA: cr 1 dlci 0 pf 1 ilen 0 fcs 0xd7
>>< ACL data: handle 0x002e flags 0x02 dlen 18
>> L2CAP(d): cid 0x0048 len 14 [psm 3]
>> RFCOMM(s): PN CMD: cr 1 dlci 0 pf 0 ilen 10 fcs 0x70 mcc_len 8
>> dlci 2 frame_type 0 credit_flow 15 pri 7 ack_timer 0
>> frame_size 669 max_retrans 0 credits 7
>>
>>
>>>HCI Event: Number of Completed Packets (0x13) plen 5
>>>ACL data: handle 0x002e flags 0x02 dlen 19
>>
>> L2CAP(d): cid 0x0040 len 15 [psm 3]
>> RFCOMM(s): PN RSP: cr 0 dlci 0 pf 0 ilen 10 fcs 0xaa mcc_len 8
>> dlci 2 frame_type 0 credit_flow 14 pri 7 ack_timer 0
>> frame_size 330 max_retrans 0 credits 7
>>< ACL data: handle 0x002e flags 0x02 dlen 8
>> L2CAP(d): cid 0x0048 len 4 [psm 3]
>> RFCOMM(s): SABM: cr 1 dlci 2 pf 1 ilen 0 fcs 0x59
>>
>>
>>>HCI Event: Number of Completed Packets (0x13) plen 5
>>>HCI Event: Link Key Request (0x17) plen 6
>>
>>< HCI Command: Link Key Request Reply (0x01|0x000b) plen 22
>>
>>
>>>HCI Event: Command Complete (0x0e) plen 10
>>>ACL data: handle 0x002e flags 0x02 dlen 8
>>
>> L2CAP(d): cid 0x0040 len 4 [psm 3]
>> RFCOMM(s): DM: cr 1 dlci 2 pf 1 ilen 0 fcs 0x73
>>< ACL data: handle 0x002e flags 0x02 dlen 8
>> L2CAP(d): cid 0x0048 len 4 [psm 3]
>> RFCOMM(s): DISC: cr 1 dlci 0 pf 1 ilen 0 fcs 0xfd
>>< ACL data: handle 0x002e flags 0x02 dlen 12
>> L2CAP(s): Disconn req: dcid 0x0048 scid 0x0040
>>< ACL data: handle 0x002e flags 0x02 dlen 12
>> L2CAP(s): Connect req: psm 3 scid 0x0041
>>
>>
>>>HCI Event: Number of Completed Packets (0x13) plen 5
>>>HCI Event: Number of Completed Packets (0x13) plen 5
>>>HCI Event: Number of Completed Packets (0x13) plen 5
>>>ACL data: handle 0x002e flags 0x02 dlen 8
>>
>> L2CAP(d): cid 0x0040 len 4 [psm 3]
>> RFCOMM(s): UA: cr 1 dlci 0 pf 1 ilen 0 fcs 0xd7
>>
>>
>>>ACL data: handle 0x002e flags 0x02 dlen 12
>>
>> L2CAP(s): Disconn rsp: dcid 0x0048 scid 0x0040
>>
>>
>>>ACL data: handle 0x002e flags 0x02 dlen 16
>>
>> L2CAP(s): Connect rsp: dcid 0x0049 scid 0x0041 result 0 status 0
>>< ACL data: handle 0x002e flags 0x02 dlen 16
>> L2CAP(s): Config req: dcid 0x0049 flags 0x0000 clen 4
>> MTU 1024
>>
>>
>>>HCI Event: Number of Completed Packets (0x13) plen 5
>>>ACL data: handle 0x002e flags 0x02 dlen 18
>>
>> L2CAP(s): Config rsp: scid 0x0041 flags 0x0000 result 0 clen 4
>> MTU 674
>>
>>
>>>ACL data: handle 0x002e flags 0x02 dlen 16
>>
>> L2CAP(s): Config req: dcid 0x0041 flags 0x0000 clen 4
>> MTU 674
>>< ACL data: handle 0x002e flags 0x02 dlen 14
>> L2CAP(s): Config rsp: scid 0x0049 flags 0x0000 result 0 clen 0
>>< ACL data: handle 0x002e flags 0x02 dlen 8
>> L2CAP(d): cid 0x0049 len 4 [psm 3]
>> RFCOMM(s): SABM: cr 1 dlci 0 pf 1 ilen 0 fcs 0x1c
>>
>>
>>>HCI Event: Number of Completed Packets (0x13) plen 5
>>>HCI Event: Number of Completed Packets (0x13) plen 5
>>>ACL data: handle 0x002e flags 0x02 dlen 8
>>
>> L2CAP(d): cid 0x0041 len 4 [psm 3]
>> RFCOMM(s): UA: cr 1 dlci 0 pf 1 ilen 0 fcs 0xd7
>>< ACL data: handle 0x002e flags 0x02 dlen 18
>> L2CAP(d): cid 0x0049 len 14 [psm 3]
>> RFCOMM(s): PN CMD: cr 1 dlci 0 pf 0 ilen 10 fcs 0x70 mcc_len 8
>> dlci 2 frame_type 0 credit_flow 15 pri 7 ack_timer 0
>> frame_size 669 max_retrans 0 credits 7
>>
>>
>>>HCI Event: Number of Completed Packets (0x13) plen 5
>>>ACL data: handle 0x002e flags 0x02 dlen 19
>>
>> L2CAP(d): cid 0x0041 len 15 [psm 3]
>> RFCOMM(s): PN RSP: cr 0 dlci 0 pf 0 ilen 10 fcs 0xaa mcc_len 8
>> dlci 2 frame_type 0 credit_flow 14 pri 7 ack_timer 0
>> frame_size 330 max_retrans 0 credits 7
>>< ACL data: handle 0x002e flags 0x02 dlen 8
>> L2CAP(d): cid 0x0049 len 4 [psm 3]
>> RFCOMM(s): SABM: cr 1 dlci 2 pf 1 ilen 0 fcs 0x59
>>
>>
>>>HCI Event: Number of Completed Packets (0x13) plen 5
>>>ACL data: handle 0x002e flags 0x02 dlen 8
>>
>> L2CAP(d): cid 0x0041 len 4 [psm 3]
>> RFCOMM(s): DM: cr 1 dlci 2 pf 1 ilen 0 fcs 0x73
>>< ACL data: handle 0x002e flags 0x02 dlen 8
>> L2CAP(d): cid 0x0049 len 4 [psm 3]
>> RFCOMM(s): DISC: cr 1 dlci 0 pf 1 ilen 0 fcs 0xfd
>>< ACL data: handle 0x002e flags 0x02 dlen 12
>> L2CAP(s): Disconn req: dcid 0x0049 scid 0x0041
>>< ACL data: handle 0x002e flags 0x02 dlen 12
>> L2CAP(s): Connect req: psm 3 scid 0x0040
>>
>>
>>>HCI Event: Number of Completed Packets (0x13) plen 5
>>>HCI Event: Number of Completed Packets (0x13) plen 5
>>>ACL data: handle 0x002e flags 0x02 dlen 8
>>
>> L2CAP(d): cid 0x0041 len 4 [psm 3]
>> RFCOMM(s): UA: cr 1 dlci 0 pf 1 ilen 0 fcs 0xd7
>>
>>
>>>HCI Event: Number of Completed Packets (0x13) plen 5
>>>ACL data: handle 0x002e flags 0x02 dlen 12
>>
>> L2CAP(s): Disconn rsp: dcid 0x0049 scid 0x0041
>>
>>
>>>ACL data: handle 0x002e flags 0x02 dlen 16
>>
>> L2CAP(s): Connect rsp: dcid 0x004a scid 0x0040 result 0 status 0
>>< ACL data: handle 0x002e flags 0x02 dlen 16
>> L2CAP(s): Config req: dcid 0x004a flags 0x0000 clen 4
>> MTU 1024
>>
>>
>>>HCI Event: Number of Completed Packets (0x13) plen 5
>>>ACL data: handle 0x002e flags 0x02 dlen 18
>>
>> L2CAP(s): Config rsp: scid 0x0040 flags 0x0000 result 0 clen 4
>> MTU 674
>>
>>
>>>ACL data: handle 0x002e flags 0x02 dlen 16
>>
>> L2CAP(s): Config req: dcid 0x0040 flags 0x0000 clen 4
>> MTU 674
>>< ACL data: handle 0x002e flags 0x02 dlen 14
>> L2CAP(s): Config rsp: scid 0x004a flags 0x0000 result 0 clen 0
>>< ACL data: handle 0x002e flags 0x02 dlen 8
>> L2CAP(d): cid 0x004a len 4 [psm 3]
>> RFCOMM(s): SABM: cr 1 dlci 0 pf 1 ilen 0 fcs 0x1c
>>
>>
>>>HCI Event: Number of Completed Packets (0x13) plen 5
>>>HCI Event: Number of Completed Packets (0x13) plen 5
>>>ACL data: handle 0x002e flags 0x02 dlen 8
>>
>> L2CAP(d): cid 0x0040 len 4 [psm 3]
>> RFCOMM(s): UA: cr 1 dlci 0 pf 1 ilen 0 fcs 0xd7
>>< ACL data: handle 0x002e flags 0x02 dlen 18
>> L2CAP(d): cid 0x004a len 14 [psm 3]
>> RFCOMM(s): PN CMD: cr 1 dlci 0 pf 0 ilen 10 fcs 0x70 mcc_len 8
>> dlci 2 frame_type 0 credit_flow 15 pri 7 ack_timer 0
>> frame_size 669 max_retrans 0 credits 7
>>
>>
>>>HCI Event: Number of Completed Packets (0x13) plen 5
>>>ACL data: handle 0x002e flags 0x02 dlen 19
>>
>> L2CAP(d): cid 0x0040 len 15 [psm 3]
>> RFCOMM(s): PN RSP: cr 0 dlci 0 pf 0 ilen 10 fcs 0xaa mcc_len 8
>> dlci 2 frame_type 0 credit_flow 14 pri 7 ack_timer 0
>> frame_size 330 max_retrans 0 credits 7
>>< ACL data: handle 0x002e flags 0x02 dlen 8
>> L2CAP(d): cid 0x004a len 4 [psm 3]
>> RFCOMM(s): SABM: cr 1 dlci 2 pf 1 ilen 0 fcs 0x59
>>
>>
>>>HCI Event: Number of Completed Packets (0x13) plen 5
>>>ACL data: handle 0x002e flags 0x02 dlen 8
>>
>> L2CAP(d): cid 0x0040 len 4 [psm 3]
>> RFCOMM(s): DM: cr 1 dlci 2 pf 1 ilen 0 fcs 0x73
>>< ACL data: handle 0x002e flags 0x02 dlen 8
>> L2CAP(d): cid 0x004a len 4 [psm 3]
>> RFCOMM(s): DISC: cr 1 dlci 0 pf 1 ilen 0 fcs 0xfd
>>< ACL data: handle 0x002e flags 0x02 dlen 12
>> L2CAP(s): Disconn req: dcid 0x004a scid 0x0040
>>
>>
>>>HCI Event: Number of Completed Packets (0x13) plen 5
>>>HCI Event: Number of Completed Packets (0x13) plen 5
>>>ACL data: handle 0x002e flags 0x02 dlen 8
>>
>> L2CAP(d): cid 0x0040 len 4 [psm 3]
>> RFCOMM(s): UA: cr 1 dlci 0 pf 1 ilen 0 fcs 0xd7
>>
>>
>>>ACL data: handle 0x002e flags 0x02 dlen 12
>>
>> L2CAP(s): Disconn rsp: dcid 0x004a scid 0x0040
>>< HCI Command: Disconnect (0x01|0x0006) plen 3
>>
>>
>>>HCI Event: Command Status (0x0f) plen 4
>>>HCI Event: Disconn Complete (0x05) plen 4
>
>
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
Can someone help me to describe what the HCIDUMP in the end of this message
says is wrong?
Does anyone have a URL to some doc that explain the HCIDUMP output?
I think the following part is of interest (see below for the full hcidump -
output):
> ACL data: handle 0x002e flags 0x02 dlen 8
L2CAP(d): cid 0x0040 len 4 [psm 3]
RFCOMM(s): DM: cr 1 dlci 2 pf 1 ilen 0 fcs 0x73
< ACL data: handle 0x002e flags 0x02 dlen 8
L2CAP(d): cid 0x0048 len 4 [psm 3]
RFCOMM(s): DISC: cr 1 dlci 0 pf 1 ilen 0 fcs 0xfd
Regards,
Magnus.
On Sunday 10 April 2005 00:32, Magnus Larsson wrote:
> I have tried to get Internet access working from my Dell LATITUDE D800
> (Suse 9.2) via "Dial Up Networking" over Bluetooth and GPRS (Sony Ericsson
> S700i).
>
> I have basically followed the instructions in the article "Linux : Net
> Access with Bluetooth and GPRS" at
> http://www.pcquest.com/content/linux/2004/104050807.asp.
>
> I actually got it working once but now I can't get it up and running again.
> See error messages from the "wvdial GPRS" command below.
>
> File transfer over Bluetooth works "out of the box" in both directions so
> basic setup seems to be ok.
>
> I have tried to get a clue by reading old postings to this maillist but I
> seem to miss something.
>
> Below I have added configuration information as I understand is of
> importance.
>
> Please advice me on what to change to get it up and running again!
> Thanks in advance!
>
>
> linux:~ # sdptool search --bdaddr 00:0F:DE:0B:A0:F5 DUN
>
> Searching for DUN on 00:0F:DE:0B:A0:F5 ...
> Service Name: Dial-up Networking
> Service RecHandle: 0x10000
> Service Class ID List:
> "Dialup Networking" (0x1103)
> "Generic Networking" (0x1201)
> Protocol Descriptor List:
> "L2CAP" (0x0100)
> "RFCOMM" (0x0003)
> Channel: 1
> Profile Descriptor List:
> "Dialup Networking" (0x1103)
> Version: 0x0100
>
>
> linux:~ # rfcomm bind 0 00:0F:DE:0B:A0:F5 1
>
>
> linux:~ # more /etc/wvdial.conf
>
> [Modem0]
> Modem = /dev/rfcomm0
> Baud = 57600
> SetVolume = 0
> Dial Command = ATDT
> Init1 = ATZ
> Init3 = ATM0
> FlowControl = None
> [Dialer GPRS]
> Username = user
> Password = user
> Phone = ATD*99#
> Stupid Mode = 1
> Inherits = Modem0
>
>
> linux:~ # wvdial GPRS
>
> --> WvDial: Internet dialer version 1.54.0
> --> Cannot open /dev/rfcomm0: Connection refused
> --> Cannot open /dev/rfcomm0: Connection refused
> --> Cannot open /dev/rfcomm0: Connection refused
>
>
> linux:~ # hcidump
> (from the failing "wvdial GPRS" command)
>
> HCIDump - HCI packet analyzer ver 1.11
> device: hci0 snap_len: 1028 filter: 0xffffffff
> < HCI Command: Create Connection (0x01|0x0005) plen 13
>
> > HCI Event: Command Status (0x0f) plen 4
> > HCI Event: Connect Complete (0x03) plen 11
>
> < ACL data: handle 0x002e flags 0x02 dlen 12
> L2CAP(s): Connect req: psm 3 scid 0x0040
> < HCI Command: Write Link Policy Settings (0x02|0x000d) plen 4
>
> > HCI Event: Number of Completed Packets (0x13) plen 5
> > HCI Event: Command Complete (0x0e) plen 6
> > HCI Event: Max Slots Change (0x1b) plen 3
> > ACL data: handle 0x002e flags 0x02 dlen 16
>
> L2CAP(s): Connect rsp: dcid 0x0048 scid 0x0040 result 0 status 0
> < ACL data: handle 0x002e flags 0x02 dlen 16
> L2CAP(s): Config req: dcid 0x0048 flags 0x0000 clen 4
> MTU 1024
>
> > HCI Event: Number of Completed Packets (0x13) plen 5
> > ACL data: handle 0x002e flags 0x02 dlen 18
>
> L2CAP(s): Config rsp: scid 0x0040 flags 0x0000 result 0 clen 4
> MTU 674
>
> > ACL data: handle 0x002e flags 0x02 dlen 16
>
> L2CAP(s): Config req: dcid 0x0040 flags 0x0000 clen 4
> MTU 674
> < ACL data: handle 0x002e flags 0x02 dlen 14
> L2CAP(s): Config rsp: scid 0x0048 flags 0x0000 result 0 clen 0
> < ACL data: handle 0x002e flags 0x02 dlen 8
> L2CAP(d): cid 0x0048 len 4 [psm 3]
> RFCOMM(s): SABM: cr 1 dlci 0 pf 1 ilen 0 fcs 0x1c
>
> > HCI Event: Number of Completed Packets (0x13) plen 5
> > HCI Event: Number of Completed Packets (0x13) plen 5
> > ACL data: handle 0x002e flags 0x02 dlen 8
>
> L2CAP(d): cid 0x0040 len 4 [psm 3]
> RFCOMM(s): UA: cr 1 dlci 0 pf 1 ilen 0 fcs 0xd7
> < ACL data: handle 0x002e flags 0x02 dlen 18
> L2CAP(d): cid 0x0048 len 14 [psm 3]
> RFCOMM(s): PN CMD: cr 1 dlci 0 pf 0 ilen 10 fcs 0x70 mcc_len 8
> dlci 2 frame_type 0 credit_flow 15 pri 7 ack_timer 0
> frame_size 669 max_retrans 0 credits 7
>
> > HCI Event: Number of Completed Packets (0x13) plen 5
> > ACL data: handle 0x002e flags 0x02 dlen 19
>
> L2CAP(d): cid 0x0040 len 15 [psm 3]
> RFCOMM(s): PN RSP: cr 0 dlci 0 pf 0 ilen 10 fcs 0xaa mcc_len 8
> dlci 2 frame_type 0 credit_flow 14 pri 7 ack_timer 0
> frame_size 330 max_retrans 0 credits 7
> < ACL data: handle 0x002e flags 0x02 dlen 8
> L2CAP(d): cid 0x0048 len 4 [psm 3]
> RFCOMM(s): SABM: cr 1 dlci 2 pf 1 ilen 0 fcs 0x59
>
> > HCI Event: Number of Completed Packets (0x13) plen 5
> > HCI Event: Link Key Request (0x17) plen 6
>
> < HCI Command: Link Key Request Reply (0x01|0x000b) plen 22
>
> > HCI Event: Command Complete (0x0e) plen 10
> > ACL data: handle 0x002e flags 0x02 dlen 8
>
> L2CAP(d): cid 0x0040 len 4 [psm 3]
> RFCOMM(s): DM: cr 1 dlci 2 pf 1 ilen 0 fcs 0x73
> < ACL data: handle 0x002e flags 0x02 dlen 8
> L2CAP(d): cid 0x0048 len 4 [psm 3]
> RFCOMM(s): DISC: cr 1 dlci 0 pf 1 ilen 0 fcs 0xfd
> < ACL data: handle 0x002e flags 0x02 dlen 12
> L2CAP(s): Disconn req: dcid 0x0048 scid 0x0040
> < ACL data: handle 0x002e flags 0x02 dlen 12
> L2CAP(s): Connect req: psm 3 scid 0x0041
>
> > HCI Event: Number of Completed Packets (0x13) plen 5
> > HCI Event: Number of Completed Packets (0x13) plen 5
> > HCI Event: Number of Completed Packets (0x13) plen 5
> > ACL data: handle 0x002e flags 0x02 dlen 8
>
> L2CAP(d): cid 0x0040 len 4 [psm 3]
> RFCOMM(s): UA: cr 1 dlci 0 pf 1 ilen 0 fcs 0xd7
>
> > ACL data: handle 0x002e flags 0x02 dlen 12
>
> L2CAP(s): Disconn rsp: dcid 0x0048 scid 0x0040
>
> > ACL data: handle 0x002e flags 0x02 dlen 16
>
> L2CAP(s): Connect rsp: dcid 0x0049 scid 0x0041 result 0 status 0
> < ACL data: handle 0x002e flags 0x02 dlen 16
> L2CAP(s): Config req: dcid 0x0049 flags 0x0000 clen 4
> MTU 1024
>
> > HCI Event: Number of Completed Packets (0x13) plen 5
> > ACL data: handle 0x002e flags 0x02 dlen 18
>
> L2CAP(s): Config rsp: scid 0x0041 flags 0x0000 result 0 clen 4
> MTU 674
>
> > ACL data: handle 0x002e flags 0x02 dlen 16
>
> L2CAP(s): Config req: dcid 0x0041 flags 0x0000 clen 4
> MTU 674
> < ACL data: handle 0x002e flags 0x02 dlen 14
> L2CAP(s): Config rsp: scid 0x0049 flags 0x0000 result 0 clen 0
> < ACL data: handle 0x002e flags 0x02 dlen 8
> L2CAP(d): cid 0x0049 len 4 [psm 3]
> RFCOMM(s): SABM: cr 1 dlci 0 pf 1 ilen 0 fcs 0x1c
>
> > HCI Event: Number of Completed Packets (0x13) plen 5
> > HCI Event: Number of Completed Packets (0x13) plen 5
> > ACL data: handle 0x002e flags 0x02 dlen 8
>
> L2CAP(d): cid 0x0041 len 4 [psm 3]
> RFCOMM(s): UA: cr 1 dlci 0 pf 1 ilen 0 fcs 0xd7
> < ACL data: handle 0x002e flags 0x02 dlen 18
> L2CAP(d): cid 0x0049 len 14 [psm 3]
> RFCOMM(s): PN CMD: cr 1 dlci 0 pf 0 ilen 10 fcs 0x70 mcc_len 8
> dlci 2 frame_type 0 credit_flow 15 pri 7 ack_timer 0
> frame_size 669 max_retrans 0 credits 7
>
> > HCI Event: Number of Completed Packets (0x13) plen 5
> > ACL data: handle 0x002e flags 0x02 dlen 19
>
> L2CAP(d): cid 0x0041 len 15 [psm 3]
> RFCOMM(s): PN RSP: cr 0 dlci 0 pf 0 ilen 10 fcs 0xaa mcc_len 8
> dlci 2 frame_type 0 credit_flow 14 pri 7 ack_timer 0
> frame_size 330 max_retrans 0 credits 7
> < ACL data: handle 0x002e flags 0x02 dlen 8
> L2CAP(d): cid 0x0049 len 4 [psm 3]
> RFCOMM(s): SABM: cr 1 dlci 2 pf 1 ilen 0 fcs 0x59
>
> > HCI Event: Number of Completed Packets (0x13) plen 5
> > ACL data: handle 0x002e flags 0x02 dlen 8
>
> L2CAP(d): cid 0x0041 len 4 [psm 3]
> RFCOMM(s): DM: cr 1 dlci 2 pf 1 ilen 0 fcs 0x73
> < ACL data: handle 0x002e flags 0x02 dlen 8
> L2CAP(d): cid 0x0049 len 4 [psm 3]
> RFCOMM(s): DISC: cr 1 dlci 0 pf 1 ilen 0 fcs 0xfd
> < ACL data: handle 0x002e flags 0x02 dlen 12
> L2CAP(s): Disconn req: dcid 0x0049 scid 0x0041
> < ACL data: handle 0x002e flags 0x02 dlen 12
> L2CAP(s): Connect req: psm 3 scid 0x0040
>
> > HCI Event: Number of Completed Packets (0x13) plen 5
> > HCI Event: Number of Completed Packets (0x13) plen 5
> > ACL data: handle 0x002e flags 0x02 dlen 8
>
> L2CAP(d): cid 0x0041 len 4 [psm 3]
> RFCOMM(s): UA: cr 1 dlci 0 pf 1 ilen 0 fcs 0xd7
>
> > HCI Event: Number of Completed Packets (0x13) plen 5
> > ACL data: handle 0x002e flags 0x02 dlen 12
>
> L2CAP(s): Disconn rsp: dcid 0x0049 scid 0x0041
>
> > ACL data: handle 0x002e flags 0x02 dlen 16
>
> L2CAP(s): Connect rsp: dcid 0x004a scid 0x0040 result 0 status 0
> < ACL data: handle 0x002e flags 0x02 dlen 16
> L2CAP(s): Config req: dcid 0x004a flags 0x0000 clen 4
> MTU 1024
>
> > HCI Event: Number of Completed Packets (0x13) plen 5
> > ACL data: handle 0x002e flags 0x02 dlen 18
>
> L2CAP(s): Config rsp: scid 0x0040 flags 0x0000 result 0 clen 4
> MTU 674
>
> > ACL data: handle 0x002e flags 0x02 dlen 16
>
> L2CAP(s): Config req: dcid 0x0040 flags 0x0000 clen 4
> MTU 674
> < ACL data: handle 0x002e flags 0x02 dlen 14
> L2CAP(s): Config rsp: scid 0x004a flags 0x0000 result 0 clen 0
> < ACL data: handle 0x002e flags 0x02 dlen 8
> L2CAP(d): cid 0x004a len 4 [psm 3]
> RFCOMM(s): SABM: cr 1 dlci 0 pf 1 ilen 0 fcs 0x1c
>
> > HCI Event: Number of Completed Packets (0x13) plen 5
> > HCI Event: Number of Completed Packets (0x13) plen 5
> > ACL data: handle 0x002e flags 0x02 dlen 8
>
> L2CAP(d): cid 0x0040 len 4 [psm 3]
> RFCOMM(s): UA: cr 1 dlci 0 pf 1 ilen 0 fcs 0xd7
> < ACL data: handle 0x002e flags 0x02 dlen 18
> L2CAP(d): cid 0x004a len 14 [psm 3]
> RFCOMM(s): PN CMD: cr 1 dlci 0 pf 0 ilen 10 fcs 0x70 mcc_len 8
> dlci 2 frame_type 0 credit_flow 15 pri 7 ack_timer 0
> frame_size 669 max_retrans 0 credits 7
>
> > HCI Event: Number of Completed Packets (0x13) plen 5
> > ACL data: handle 0x002e flags 0x02 dlen 19
>
> L2CAP(d): cid 0x0040 len 15 [psm 3]
> RFCOMM(s): PN RSP: cr 0 dlci 0 pf 0 ilen 10 fcs 0xaa mcc_len 8
> dlci 2 frame_type 0 credit_flow 14 pri 7 ack_timer 0
> frame_size 330 max_retrans 0 credits 7
> < ACL data: handle 0x002e flags 0x02 dlen 8
> L2CAP(d): cid 0x004a len 4 [psm 3]
> RFCOMM(s): SABM: cr 1 dlci 2 pf 1 ilen 0 fcs 0x59
>
> > HCI Event: Number of Completed Packets (0x13) plen 5
> > ACL data: handle 0x002e flags 0x02 dlen 8
>
> L2CAP(d): cid 0x0040 len 4 [psm 3]
> RFCOMM(s): DM: cr 1 dlci 2 pf 1 ilen 0 fcs 0x73
> < ACL data: handle 0x002e flags 0x02 dlen 8
> L2CAP(d): cid 0x004a len 4 [psm 3]
> RFCOMM(s): DISC: cr 1 dlci 0 pf 1 ilen 0 fcs 0xfd
> < ACL data: handle 0x002e flags 0x02 dlen 12
> L2CAP(s): Disconn req: dcid 0x004a scid 0x0040
>
> > HCI Event: Number of Completed Packets (0x13) plen 5
> > HCI Event: Number of Completed Packets (0x13) plen 5
> > ACL data: handle 0x002e flags 0x02 dlen 8
>
> L2CAP(d): cid 0x0040 len 4 [psm 3]
> RFCOMM(s): UA: cr 1 dlci 0 pf 1 ilen 0 fcs 0xd7
>
> > ACL data: handle 0x002e flags 0x02 dlen 12
>
> L2CAP(s): Disconn rsp: dcid 0x004a scid 0x0040
> < HCI Command: Disconnect (0x01|0x0006) plen 3
>
> > HCI Event: Command Status (0x0f) plen 4
> > HCI Event: Disconn Complete (0x05) plen 4
--
Magnus Larsson
Callista Enterprise AB
Phone: +46 733 51 91 72
http://www.callista.se/Enterprise/
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users