-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Hi.
I'm trying to use the Musicool 300 headset with BlueZ.
I see Marcel Holtmann reports on him site.
I have some trouble because my headset doesn't reply to my question:
~# hcitool inq
Inquiring ...
00:0B:0D:50:15:C7 clock offset: 0x2705 class: 0x200404
~# hcitool name 00:0B:0D:50:15:C7
Headphone[15C7]
~# hcitool info 00:0B:0D:50:15:C7
Requesting information ...
Can't create connection: Connection timed out
~#
I report hcidump output:
< HCI Command: Remote Name Request (0x01|0x0019) plen 10
bdaddr 00:0B:0D:50:15:C7 mode 2 clkoffset 0x0000
> HCI Event: Command Status (0x0f) plen 4
Remote Name Request (0x01|0x0019) status 0x00 ncmd 1
> HCI Event: Remote Name Req Complete (0x07) plen 255
status 0x00 bdaddr 00:0B:0D:50:15:C7 name 'Headphone[15C7]'
< HCI Command: Create Connection (0x01|0x0005) plen 13
bdaddr 00:0B:0D:50:15:C7 ptype 0xcc18 rswitch 0x01 clkoffset 0x0000
Packet type: DM1 DM3 DM5 DH1 DH3 DH5
> HCI Event: Command Status (0x0f) plen 4
Create Connection (0x01|0x0005) status 0x00 ncmd 1
> HCI Event: PIN Code Request (0x16) plen 6
bdaddr 00:0B:0D:50:15:C7
> HCI Event: Connect Complete (0x03) plen 11
status 0x22 handle 41 bdaddr 00:0B:0D:50:15:C7 type ACL encrypt 0x00
Error: LMP Response Timeout
When I try to connect btsco with the headset, I obtain:
~# btsco 00:0B:0D:50:15:C7
Error: Failed to connect to SDP server: Function not implemented
Assuming channel 2
Can't connect RFCOMM channel: Resource temporarily unavailable
~#
and the hcidump output is:
< HCI Command: Create Connection (0x01|0x0005) plen 13
bdaddr 00:0B:0D:50:15:C7 ptype 0xcc18 rswitch 0x01 clkoffset 0x0000
Packet type: DM1 DM3 DM5 DH1 DH3 DH5
> HCI Event: Command Status (0x0f) plen 4
Create Connection (0x01|0x0005) status 0x00 ncmd 1
> HCI Event: PIN Code Request (0x16) plen 6
bdaddr 00:0B:0D:50:15:C7
> HCI Event: Connect Complete (0x03) plen 11
status 0x22 handle 41 bdaddr 00:0B:0D:50:15:C7 type ACL encrypt 0x00
Error: LMP Response Timeout
< HCI Command: Read Voice Setting (0x03|0x0025) plen 0
> HCI Event: Command Complete (0x0e) plen 6
Read Voice Setting (0x03|0x0025) ncmd 1
status 0x00 voice setting 0x0060
< HCI Command: Create Connection (0x01|0x0005) plen 13
bdaddr 00:0B:0D:50:15:C7 ptype 0xcc18 rswitch 0x01 clkoffset 0x0000
Packet type: DM1 DM3 DM5 DH1 DH3 DH5
> HCI Event: Command Status (0x0f) plen 4
Create Connection (0x01|0x0005) status 0x00 ncmd 1
> HCI Event: PIN Code Request (0x16) plen 6
bdaddr 00:0B:0D:50:15:C7
> HCI Event: Connect Complete (0x03) plen 11
status 0x22 handle 42 bdaddr 00:0B:0D:50:15:C7 type ACL encrypt 0x00
Error: LMP Response Timeout
pin helper application doesn't start in both cases.
Any ideas or suggestions?
thx in advance!
PS: with the same system, I've configured a working NAP, so my bluetooth
dongle is ok.
- -------------------------------------------
Luca Pizzamiglio
CEFRIEL - Embedded Systems Design Unit
Via Fucini, 2 - 20133 MILANO (ITALY)
Phone: +39 02 23954 343
e-mail: [email protected]
ICQ: 5046978
- -------------------------------------------
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.7 (GNU/Linux)
Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org
iD8DBQFCury+AoUy56ORfbERAhTqAJ9Ggtu5FOHRaCW9cRp2DQa7KhAHRwCfaKpS
UMnl3vEsOk8sYwHQAuDy3AU=
=HxsQ
-----END PGP SIGNATURE-----
-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies
from IBM. Find simple to follow Roadmaps, straightforward articles,
informative Webcasts and more! Get everything you need to get up to
speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Hi.
I've solved my problems: battery lifewas ending, so Musicool headset
dosn'work so well.
Now it's run. I've only tried sco link, but next time I'll try A2DP profile.
Cheers,
Pizza
Luca Pizzamiglio wrote:
> Hi.
> I'm trying to use the Musicool 300 headset with BlueZ.
> I see Marcel Holtmann reports on him site.
> I have some trouble because my headset doesn't reply to my question:
>
> ~# hcitool inq
> Inquiring ...
> 00:0B:0D:50:15:C7 clock offset: 0x2705 class: 0x200404
> ~# hcitool name 00:0B:0D:50:15:C7
> Headphone[15C7]
> ~# hcitool info 00:0B:0D:50:15:C7
> Requesting information ...
> Can't create connection: Connection timed out
> ~#
>
> I report hcidump output:
> < HCI Command: Remote Name Request (0x01|0x0019) plen 10
> bdaddr 00:0B:0D:50:15:C7 mode 2 clkoffset 0x0000
>
>>>HCI Event: Command Status (0x0f) plen 4
>
> Remote Name Request (0x01|0x0019) status 0x00 ncmd 1
>
>>>HCI Event: Remote Name Req Complete (0x07) plen 255
>
> status 0x00 bdaddr 00:0B:0D:50:15:C7 name 'Headphone[15C7]'
>
> < HCI Command: Create Connection (0x01|0x0005) plen 13
> bdaddr 00:0B:0D:50:15:C7 ptype 0xcc18 rswitch 0x01 clkoffset 0x0000
> Packet type: DM1 DM3 DM5 DH1 DH3 DH5
>
>>>HCI Event: Command Status (0x0f) plen 4
>
> Create Connection (0x01|0x0005) status 0x00 ncmd 1
>
>>>HCI Event: PIN Code Request (0x16) plen 6
>
> bdaddr 00:0B:0D:50:15:C7
>
>>>HCI Event: Connect Complete (0x03) plen 11
>
> status 0x22 handle 41 bdaddr 00:0B:0D:50:15:C7 type ACL encrypt 0x00
> Error: LMP Response Timeout
>
> When I try to connect btsco with the headset, I obtain:
>
> ~# btsco 00:0B:0D:50:15:C7
> Error: Failed to connect to SDP server: Function not implemented
> Assuming channel 2
>
> Can't connect RFCOMM channel: Resource temporarily unavailable
> ~#
>
> and the hcidump output is:
>
> < HCI Command: Create Connection (0x01|0x0005) plen 13
> bdaddr 00:0B:0D:50:15:C7 ptype 0xcc18 rswitch 0x01 clkoffset 0x0000
> Packet type: DM1 DM3 DM5 DH1 DH3 DH5
>
>>>HCI Event: Command Status (0x0f) plen 4
>
> Create Connection (0x01|0x0005) status 0x00 ncmd 1
>
>>>HCI Event: PIN Code Request (0x16) plen 6
>
> bdaddr 00:0B:0D:50:15:C7
>
>>>HCI Event: Connect Complete (0x03) plen 11
>
> status 0x22 handle 41 bdaddr 00:0B:0D:50:15:C7 type ACL encrypt 0x00
> Error: LMP Response Timeout
> < HCI Command: Read Voice Setting (0x03|0x0025) plen 0
>
>>>HCI Event: Command Complete (0x0e) plen 6
>
> Read Voice Setting (0x03|0x0025) ncmd 1
> status 0x00 voice setting 0x0060
> < HCI Command: Create Connection (0x01|0x0005) plen 13
> bdaddr 00:0B:0D:50:15:C7 ptype 0xcc18 rswitch 0x01 clkoffset 0x0000
> Packet type: DM1 DM3 DM5 DH1 DH3 DH5
>
>>>HCI Event: Command Status (0x0f) plen 4
>
> Create Connection (0x01|0x0005) status 0x00 ncmd 1
>
>>>HCI Event: PIN Code Request (0x16) plen 6
>
> bdaddr 00:0B:0D:50:15:C7
>
>>>HCI Event: Connect Complete (0x03) plen 11
>
> status 0x22 handle 42 bdaddr 00:0B:0D:50:15:C7 type ACL encrypt 0x00
> Error: LMP Response Timeout
>
>
> pin helper application doesn't start in both cases.
> Any ideas or suggestions?
>
> thx in advance!
>
> PS: with the same system, I've configured a working NAP, so my bluetooth
> dongle is ok.
- -------------------------------------------
Luca Pizzamiglio
CEFRIEL - Embedded Systems Design Unit
Via Fucini, 2 - 20133 MILANO (ITALY)
Phone: +39 02 23954 343
e-mail: [email protected]
ICQ: 5046978
- -------------------------------------------
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.7 (GNU/Linux)
Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org
iD8DBQFCv/zpAoUy56ORfbERAsqkAJ9TXse+opDyx9FOQK6ZFu15glmtKgCgjiKy
E7HdyIiIbepfKW6BthC9Qrk=
=nObX
-----END PGP SIGNATURE-----
-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies
from IBM. Find simple to follow Roadmaps, straightforward articles,
informative Webcasts and more! Get everything you need to get up to
speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users