Hi guys...
I have an ISSC dongle which has the following bdaddress and other info....
Now does it support SCO??
root@0[test]# hciconfig hci0 revision
hci0: Type: USB
BD Address: 11:11:11:11:11:11 ACL MTU: 678:8 SCO MTU: 48:10
Unsupported manufacturer
its hciconfig -a gives
root@0[test]# hciconfig -a
hci0: Type: USB
BD Address: 11:11:11:11:11:11 ACL MTU: 678:8 SCO MTU: 48:10
UP RUNNING PSCAN ISCAN
RX bytes:6891545 acl:128 sco:168567 events:425 errors:0
TX bytes:3268 acl:128 sco:0 commands:139 errors:0
Features: 0xbf 0xfe 0x8d 0x78 0x08 0x18 0x00 0x00
Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
Link policy: RSWITCH HOLD SNIFF PARK
Link mode: SLAVE ACCEPT
Name: 'Knoppix-0'
Class: 0x000100
Service Classes: Unspecified
Device Class: Computer, Uncategorized
HCI Ver: 1.2 (0x2) HCI Rev: 0x1fe LMP Ver: 1.2 (0x2) LMP Subver:
0x1fe
Manufacturer: Integrated System Solution Corp. (57)
hcitool info gives:
root@bluetooth:~# hcitool info 11:11:11:11:11:11
Requesting information ...
BD Address: 11:11:11:11:11:11
Device Name: Knoppix-0
LMP Version: 1.2 (0x2) LMP Subversion: 0x1fe
Manufacturer: Integrated System Solution Corp. (57)
Features: 0xbf 0xfe 0x8d 0x78 0x08 0x18 0x00 0x00
<3-slot packets> <5-slot packets> <encryption> <slot offset>
<timing accuracy> <role switch> <sniff mode> <RSSI>
<channel quality> <SCO link> <HV2 packets> <HV3 packets>
<u-law log> <A-law log> <CVSD> <power control>
<transparent SCO> <broadcast encrypt> <enhanced iscan>
<interlaced iscan> <interlaced pscan> <inquiry with RSSI>
<AFH cap. slave> <AFH cap. master> <AFH class. master>
ne ideas??