The talitos driver can cause starvation of other softirqs and as such
it can also cause rcu stalls like:
INFO: rcu_sched self-detected stall on CPU { 1} (t=15001 jiffies g=6799 c=6798 q=728)
INFO: rcu_sched detected stalls on CPUs/tasks: { 1} (detected by 0, t=15002 jiffies, g=6799, c=6798, q=728)
Task dump for CPU 1:
ovs-vswitchd R running 0 3225 1 0x00000004
Call Trace:
[c68879a0] [00000002] 0x2 (unreliable)
[c6887a60] [00000000] (null)
CPU: 1 PID: 3225 Comm: ovs-vswitchd Tainted: G W 3.10.36 #2
Call Trace:
[effe9900] [c0006b08] show_stack+0x44/0x15c (unreliable)
[effe9940] [c0072eb0] rcu_check_callbacks+0x21c/0x668
[effe99a0] [c0030f48] update_process_times+0x44/0x70
[effe99c0] [c005fdac] tick_sched_timer+0x2d4/0x314
[effe9a00] [c00466f4] __run_hrtimer.isra.29+0x54/0xf8
[effe9a20] [c0047110] hrtimer_interrupt+0x1a4/0x3bc
[effe9aa0] [c000827c] timer_interrupt+0x15c/0x1a4
[effe9ad0] [c000d470] ret_from_except+0x0/0x18
--- Exception: 901 at memcpy+0x1c/0x9c
LR = pskb_expand_head+0x94/0x298
[effe9b90] [c02260c0] pskb_expand_head+0x68/0x298 (unreliable)
[effe9bc0] [f159d20c] 0xf159d20c
[effe9bd0] [c02344f4] dev_hard_start_xmit+0x2b8/0x454
[effe9c00] [c024d330] sch_direct_xmit+0x70/0x1e8
[effe9c20] [c0234914] dev_queue_xmit+0x284/0x4fc
[effe9c50] [c02cf3b0] vlan_dev_hard_start_xmit+0xa8/0x178
[effe9c60] [c02344f4] dev_hard_start_xmit+0x2b8/0x454
[effe9c90] [c0234a64] dev_queue_xmit+0x3d4/0x4fc
[effe9cc0] [f14cb2c4] ovs_netdev_get_name+0xac/0x404 [openvswitch]
[effe9ce0] [f14c9698] ovs_vport_send+0x28/0xe8 [openvswitch]
[effe9d00] [f14c0000] 0xf14c0000
[effe9d10] [f14c0b84] 0xf14c0b84
[effe9d90] [f14c0c74] ovs_execute_actions+0xa4/0x1270 [openvswitch]
[effe9dc0] [f14c3a30] ovs_dp_process_received_packet+0xd0/0x11c [openvswitch]
[effe9e70] [f14ca3f0] ovs_vport_deferred_free+0xc98/0xd78 [openvswitch]
[effe9e80] [c02344f4] dev_hard_start_xmit+0x2b8/0x454
[effe9eb0] [c0234a64] dev_queue_xmit+0x3d4/0x4fc
[effe9ee0] [c0266924] ip_finish_output+0x450/0x4b4
[effe9f10] [f13a8920] talitos_submit+0x2d8/0x3f1c [talitos]
[effe9f60] [f13a8aa4] talitos_submit+0x45c/0x3f1c [talitos]
[effe9f70] [c002aa9c] tasklet_action+0xe4/0x178
[effe9fa0] [c002ac18] __do_softirq+0xe8/0x1ac
[effe9ff0] [c000b974] call_do_softirq+0x14/0x24
[c6887ee0] [c0004498] do_softirq+0x84/0xc4
[c6887f00] [c002ae2c] irq_exit+0x64/0x7c
[c6887f10] [c0004268] do_IRQ+0x12c/0x154
[c6887f40] [c000d470] ret_from_except+0x0/0x18
Work around this by processing a maximum amount of 16 finished requests
and rescheduling the done-tasklet if any work is left.
This allows other softirqs to run.
Signed-off-by: Helmut Schaa <[email protected]>
---
drivers/crypto/talitos.c | 35 +++++++++++++++++++++++------------
1 file changed, 23 insertions(+), 12 deletions(-)
diff --git a/drivers/crypto/talitos.c b/drivers/crypto/talitos.c
index 624b8be..e0f03da 100644
--- a/drivers/crypto/talitos.c
+++ b/drivers/crypto/talitos.c
@@ -244,17 +244,18 @@ EXPORT_SYMBOL(talitos_submit);
/*
* process what was done, notify callback of error if not
*/
-static void flush_channel(struct device *dev, int ch, int error, int reset_ch)
+static int flush_channel(struct device *dev, int ch, int error, int reset_ch)
{
struct talitos_private *priv = dev_get_drvdata(dev);
struct talitos_request *request, saved_req;
unsigned long flags;
int tail, status;
+ int cnt = 16;
spin_lock_irqsave(&priv->chan[ch].tail_lock, flags);
tail = priv->chan[ch].tail;
- while (priv->chan[ch].fifo[tail].desc) {
+ while (priv->chan[ch].fifo[tail].desc && (--cnt > 0)) {
request = &priv->chan[ch].fifo[tail];
/* descriptors with their done bits set don't get the error */
@@ -291,36 +292,46 @@ static void flush_channel(struct device *dev, int ch, int error, int reset_ch)
status);
/* channel may resume processing in single desc error case */
if (error && !reset_ch && status == error)
- return;
+ return 0;
spin_lock_irqsave(&priv->chan[ch].tail_lock, flags);
tail = priv->chan[ch].tail;
}
spin_unlock_irqrestore(&priv->chan[ch].tail_lock, flags);
+
+ if (cnt == 0)
+ return 1; /* Need to reschedule */
+ return 0;
}
/*
* process completed requests for channels that have done status
*/
-#define DEF_TALITOS_DONE(name, ch_done_mask) \
+#define DEF_TALITOS_DONE(name, ch_done_mask, tlet) \
static void talitos_done_##name(unsigned long data) \
{ \
struct device *dev = (struct device *)data; \
struct talitos_private *priv = dev_get_drvdata(dev); \
unsigned long flags; \
+ int resched = 0; \
\
if (ch_done_mask & 1) \
- flush_channel(dev, 0, 0, 0); \
+ resched += flush_channel(dev, 0, 0, 0); \
if (priv->num_channels == 1) \
goto out; \
if (ch_done_mask & (1 << 2)) \
- flush_channel(dev, 1, 0, 0); \
+ resched += flush_channel(dev, 1, 0, 0); \
if (ch_done_mask & (1 << 4)) \
- flush_channel(dev, 2, 0, 0); \
+ resched += flush_channel(dev, 2, 0, 0); \
if (ch_done_mask & (1 << 6)) \
- flush_channel(dev, 3, 0, 0); \
+ resched += flush_channel(dev, 3, 0, 0); \
\
out: \
+ if (resched) { \
+ tasklet_schedule(&priv->done_task[tlet]); \
+ return; \
+ } \
+ \
/* At this point, all completed channels have been processed */ \
/* Unmask done interrupts for channels completed later on. */ \
spin_lock_irqsave(&priv->reg_lock, flags); \
@@ -328,9 +339,9 @@ out: \
setbits32(priv->reg + TALITOS_IMR_LO, TALITOS_IMR_LO_INIT); \
spin_unlock_irqrestore(&priv->reg_lock, flags); \
}
-DEF_TALITOS_DONE(4ch, TALITOS_ISR_4CHDONE)
-DEF_TALITOS_DONE(ch0_2, TALITOS_ISR_CH_0_2_DONE)
-DEF_TALITOS_DONE(ch1_3, TALITOS_ISR_CH_1_3_DONE)
+DEF_TALITOS_DONE(4ch, TALITOS_ISR_4CHDONE, 0)
+DEF_TALITOS_DONE(ch0_2, TALITOS_ISR_CH_0_2_DONE, 0)
+DEF_TALITOS_DONE(ch1_3, TALITOS_ISR_CH_1_3_DONE, 1)
/*
* locate current (offending) descriptor
@@ -489,7 +500,7 @@ static void talitos_error(struct device *dev, u32 isr, u32 isr_lo)
if (v_lo & TALITOS_CCPSR_LO_SRL)
dev_err(dev, "scatter return/length error\n");
- flush_channel(dev, ch, error, reset_ch);
+ while (flush_channel(dev, ch, error, reset_ch));
if (reset_ch) {
reset_channel(dev, ch);
--
1.8.4.5
On Wed, 10 Sep 2014 10:34:47 +0200
Helmut Schaa <[email protected]> wrote:
> The talitos driver can cause starvation of other softirqs and as such
> it can also cause rcu stalls like:
...
> Work around this by processing a maximum amount of 16 finished requests
> and rescheduling the done-tasklet if any work is left.
> This allows other softirqs to run.
16 sounds rather arbitrary, and application-dependent - talitos'
FIFO size is 24.
IIRC, netdev's NAPI can be refactored out of just being able to work
on network devices, and be made to apply to crypto devices, too. In
fact, some old Freescale hacks of this nature have improved
performance. Can we do something like refactor NAPI instead?
Thanks,
Kim
On Fri, Sep 12, 2014 at 2:49 AM, Kim Phillips
<[email protected]> wrote:
> On Wed, 10 Sep 2014 10:34:47 +0200
> Helmut Schaa <[email protected]> wrote:
>
>> The talitos driver can cause starvation of other softirqs and as such
>> it can also cause rcu stalls like:
> ...
>> Work around this by processing a maximum amount of 16 finished requests
>> and rescheduling the done-tasklet if any work is left.
>> This allows other softirqs to run.
>
> 16 sounds rather arbitrary, and application-dependent - talitos'
> FIFO size is 24.
Yep, 16 is arbitrary, I can also do "fifo_len" if you prefer?
> IIRC, netdev's NAPI can be refactored out of just being able to work
> on network devices, and be made to apply to crypto devices, too. In
> fact, some old Freescale hacks of this nature have improved
> performance. Can we do something like refactor NAPI instead?
That would indeed be nice but sounds like quite some more work and
I won't have time to do so. Especially since my system was taken down
completely by the talitos tasklet under some circumstances. If there is
any work going on in that regard I'd be fine with just dropping that patch
(and carrying it myself until the refactoring is done).
Regards,
Helmut
[adding Sandeep, Horia and netdev]
On Fri, 12 Sep 2014 09:39:12 +0200
Helmut Schaa <[email protected]> wrote:
> On Fri, Sep 12, 2014 at 2:49 AM, Kim Phillips
> <[email protected]> wrote:
> > On Wed, 10 Sep 2014 10:34:47 +0200
> > Helmut Schaa <[email protected]> wrote:
> >
> >> The talitos driver can cause starvation of other softirqs and as such
> >> it can also cause rcu stalls like:
> > ...
> >> Work around this by processing a maximum amount of 16 finished requests
> >> and rescheduling the done-tasklet if any work is left.
> >> This allows other softirqs to run.
> >
> > 16 sounds rather arbitrary, and application-dependent - talitos'
> > FIFO size is 24.
>
> Yep, 16 is arbitrary, I can also do "fifo_len" if you prefer?
>
> > IIRC, netdev's NAPI can be refactored out of just being able to work
> > on network devices, and be made to apply to crypto devices, too. In
> > fact, some old Freescale hacks of this nature have improved
> > performance. Can we do something like refactor NAPI instead?
>
> That would indeed be nice but sounds like quite some more work and
> I won't have time to do so. Especially since my system was taken down
> completely by the talitos tasklet under some circumstances. If there is
> any work going on in that regard I'd be fine with just dropping that patch
> (and carrying it myself until the refactoring is done).
I'm not aware of any, but to prove whether NAPI actually fixes the
issue, can you try applying this patch:
http://patchwork.ozlabs.org/patch/146094/
For it to be upstream-acceptable, I believe it would have to port
NAPI in such a way that all crypto drivers could use it. The
difference between net NAPI and crypto NAPI would be that the crypto
version would be reduced to only using the weight code, since that's
the only source of the performance benefit.
Thanks,
Kim
On Sat, Sep 13, 2014 at 1:21 AM, Kim Phillips
<[email protected]> wrote:
> [adding Sandeep, Horia and netdev]
>
> On Fri, 12 Sep 2014 09:39:12 +0200
> Helmut Schaa <[email protected]> wrote:
>
>> On Fri, Sep 12, 2014 at 2:49 AM, Kim Phillips
>> <[email protected]> wrote:
>> > On Wed, 10 Sep 2014 10:34:47 +0200
>> > Helmut Schaa <[email protected]> wrote:
>> >
>> >> The talitos driver can cause starvation of other softirqs and as such
>> >> it can also cause rcu stalls like:
>> > ...
>> >> Work around this by processing a maximum amount of 16 finished requests
>> >> and rescheduling the done-tasklet if any work is left.
>> >> This allows other softirqs to run.
>> >
>> > 16 sounds rather arbitrary, and application-dependent - talitos'
>> > FIFO size is 24.
>>
>> Yep, 16 is arbitrary, I can also do "fifo_len" if you prefer?
>>
>> > IIRC, netdev's NAPI can be refactored out of just being able to work
>> > on network devices, and be made to apply to crypto devices, too. In
>> > fact, some old Freescale hacks of this nature have improved
>> > performance. Can we do something like refactor NAPI instead?
>>
>> That would indeed be nice but sounds like quite some more work and
>> I won't have time to do so. Especially since my system was taken down
>> completely by the talitos tasklet under some circumstances. If there is
>> any work going on in that regard I'd be fine with just dropping that patch
>> (and carrying it myself until the refactoring is done).
>
> I'm not aware of any, but to prove whether NAPI actually fixes the
> issue, can you try applying this patch:
> http://patchwork.ozlabs.org/patch/146094/
I guess this would fix it too. Will run some tests soon.
Helmut