This adds an initial first draft of iomap documentation. Hopefully this
will come useful to those who are looking for converting their
filesystems to iomap. Currently this is in text format since this is the
first draft. I would prefer to work on it's conversion to .rst once we
receive the feedback/review comments on the overall content of the document.
But feel free to let me know if we prefer it otherwise.
A lot of this has been collected from various email conversations, code
comments, commit messages and/or my own understanding of iomap. Please
note a large part of this has been taken from Dave's reply to last iomap
doc patchset. Thanks to Dave, Darrick, Matthew, Christoph and other iomap
developers who have taken time to explain the iomap design in various emails,
commits, comments etc.
Please note that this is not the complete iomap design doc. but a brief
overview of iomap.
Signed-off-by: Ritesh Harjani (IBM) <[email protected]>
---
Documentation/filesystems/index.rst | 1 +
Documentation/filesystems/iomap.txt | 289 ++++++++++++++++++++++++++++
MAINTAINERS | 1 +
3 files changed, 291 insertions(+)
create mode 100644 Documentation/filesystems/iomap.txt
diff --git a/Documentation/filesystems/index.rst b/Documentation/filesystems/index.rst
index 1f9b4c905a6a..c17b5a2ec29b 100644
--- a/Documentation/filesystems/index.rst
+++ b/Documentation/filesystems/index.rst
@@ -34,6 +34,7 @@ algorithms work.
seq_file
sharedsubtree
idmappings
+ iomap
automount-support
diff --git a/Documentation/filesystems/iomap.txt b/Documentation/filesystems/iomap.txt
new file mode 100644
index 000000000000..4f766b129975
--- /dev/null
+++ b/Documentation/filesystems/iomap.txt
@@ -0,0 +1,289 @@
+Introduction
+============
+iomap is a filesystem centric mapping layer that maps file's logical offset
+ranges to physical extents. It provides several iterator APIs which filesystems
+can use for doing various file_operations, address_space_operations,
+vm_operations, inode_operations etc. It supports APIs for doing direct-io,
+buffered-io, lseek, dax-io, page-mkwrite, swap_activate and extent reporting
+via fiemap.
+
+iomap is termed above as filesystem centric because it first calls
+->iomap_begin() phase supplied by the filesystem to get a mapped extent and
+then loops over each folio within that mapped extent.
+This is useful for filesystems because now they can allocate/reserve a much
+larger extent at begin phase v/s the older approach of doing block allocation
+of one block at a time by calling filesystem's provided ->get_blocks() routine.
+
+i.e. at a high level how iomap does write iter is [1]::
+ user IO
+ loop for file IO range
+ loop for each mapped extent
+ if (buffered) {
+ loop for each page/folio {
+ instantiate page cache
+ copy data to/from page cache
+ update page cache state
+ }
+ } else { /* direct IO */
+ loop for each bio {
+ pack user pages into bio
+ submit bio
+ }
+ }
+ }
+ }
+
+
+Motivation for filesystems to convert to iomap
+===============================================
+1. iomap is a modern filesystem mapping layer VFS abstraction.
+2. It also supports large folios for buffered-writes. Large folios can help
+improve filesystem buffered-write performance and can also improve overall
+system performance.
+3. Less maintenance overhead for individual filesystem maintainers.
+iomap is able to abstract away common folio-cache related operations from the
+filesystem to within the iomap layer itself. e.g. allocating, instantiating,
+locking and unlocking of the folios for buffered-write operations are now taken
+care within iomap. No ->write_begin(), ->write_end() or direct_IO
+address_space_operations are required to be implemented by filesystem using
+iomap.
+
+
+blocksize < pagesize path/large folios
+======================================
+Large folio support or systems with large pagesize e.g 64K on Power/ARM64 and
+4k blocksize, needs filesystems to support bs < ps paths. iomap embeds
+struct iomap_folio_state (ifs) within folio->private. ifs maintains uptodate
+and dirty bits for each subblock within the folio. Using ifs iomap can track
+update and dirty status of each block within the folio. This helps in supporting
+bs < ps path for such systems with large pagesize or with large folios [2].
+
+
+struct iomap
+=============
+This structure defines a file mapping information of logical file offset range
+to a physical mapped extent on which an IO operation could be performed.
+An iomap reflects a single contiguous range of filesystem address space that
+either exists in memory or on a block device.
+1. The type field within iomap determines what type the range maps to e.g.
+IOMAP_HOLE, IOMAP_DELALLOC, IOMAP_UNWRITTEN etc.
+
+2. The flags field represent the state flags (e.g. IOMAP_F_*), most of which are
+set the by the filesystem during mapping time that indicates how iomap
+infrastructure should modify it's behaviour to do the right thing.
+
+3. private void pointer within iomap allows the filesystems to pass filesystem's
+private data from ->iomap_begin() to ->iomap_end() [3].
+(see include/linux/iomap.h for more details)
+
+
+iomap operations
+================
+iomap provides different iterator APIs for direct-io, buffered-io, lseek,
+dax-io, page-mkwrite, swap_activate and extent reporting via fiemap. It requires
+various struct operations to be prepared by filesystem and to be supplied to
+iomap iterator APIs either at the beginning of iomap api call or attaching it
+during the mapping callback time e.g iomap_folio_ops is attached to
+iomap->folio_ops during ->iomap_begin() call.
+
+Following provides various ops to be supplied by filesystems to iomap layer for
+doing different I/O types as discussed above.
+
+iomap_ops: IO interface specific operations
+==========
+The methods are designed to be used as pairs. The begin method creates the iomap
+and attaches all the necessary state and information which subsequent iomap
+methods & their callbacks might need. Once the iomap infrastructure has finished
+working on the iomap it will call the end method to allow the filesystem to tear
+down any unused space and/or structures it created for the specific iomap
+context.
+
+Almost all iomap iterator APIs require filesystems to define iomap_ops so that
+filesystems can be called into for providing logical to physical extent mapping,
+wherever required. This is required by the iomap iter apis used for the
+operations which are listed in the beginning of "iomap operations" section.
+ - iomap_begin: This either returns an existing mapping or reserve/allocates a
+ new mapping when called by iomap. pos and length are passed as function
+ arguments. Filesystem returns the new mapping information within struct
+ iomap which also gets passed as a function argument. Filesystems should
+ provide the type of this extent in iomap->type for e.g. IOMAP_HOLE,
+ IOMAP_UNWRITTEN and it should set the iomap->flags e.g. IOMAP_F_*
+ (see details in include/linux/iomap.h)
+
+ Note that iomap_begin() call has srcmap passed as another argument. This is
+ mainly used only during the begin phase for COW mappings to identify where
+ the reads are to be performed from. Filesystems needs to fill that mapping
+ information if iomap should read data for partially written blocks from a
+ different location than the write target [4].
+
+ - iomap_end: Commit and/or unreserve space which was previously allocated
+ using iomap_begin. During buffered-io, when a short writes occurs,
+ filesystem may need to remove the reserved space that was allocated
+ during ->iomap_begin. For filesystems that use delalloc allocation, we need
+ to punch out delalloc extents from the range that are not dirty in the page
+ cache. See comments in iomap_file_buffered_write_punch_delalloc() for more
+ info [5][6].
+
+iomap_dio_ops: Direct I/O operations structure for iomap.
+=============
+This gets passed with iomap_dio_rw(), so that iomap can call certain operations
+before submission or on completion of DIRECT_IO.
+ - end_io: Required after bio completion for e.g. for conversion of unwritten
+ extents.
+
+ - submit_io: This hook is required for e.g. by filesystems like btrfs who
+ would like to do things like data replication for fs-handled RAID.
+
+ - bio_set: This allows the filesystem to provide custom bio_set for allocating
+ direct I/O bios. This will allow the filesystem who uses ->submit_io hook to
+ stash away additional information for filesystem use. Filesystems will
+ provide their custom ->bi_end_io function completion which should then call
+ into iomap_dio_bio_end_io() for dio completion [11].
+
+iomap_writeback_ops: Writeback operations structure for iomap
+====================
+Writeback address space operations e.g. iomap_writepages(), requires the
+filesystem to pass this ops field.
+ - map_blocks: map the blocks at the writeback time. This is called once per
+ folio. Filesystems can return an existing mapping from a previous call if
+ that mapping is still valid. This can race with paths which can invalidate
+ previous mappings such as fallocate/truncate. Hence filesystems must have
+ a mechanism by which it can validate if the previous mapping provided is
+ still valid. Filesystems might need a per inode seq counter which can be
+ used to verify if the underlying mapping of logical to physical blocks
+ has changed since the last ->map_blocks call or not.
+ They can then use wpc->iomap->validity_cookie to cache their seq count in
+ ->map_blocks call [6].
+
+ - prepare_ioend: Allows filesystems to process the extents before submission
+ for e.g. convert COW extents to regular. This also allows filesystem to
+ hook in a custom completion handler for processing bio completion e.g.
+ conversion of unwritten extents.
+ Note that ioends might need to be processed as an atomic completion unit
+ (using transactions) when all the chained bios in the ioend have completed
+ (e.g. for conversion of unwritten extents). iomap provides some helper
+ methods for ioend merging and completion [12]. Look at comments in
+ xfs_end_io() routine for more info.
+
+ - discard_folio: In case if the filesystem has any delalloc blocks on it,
+ then those needs to be punched out in this call. Otherwise, it may leave a
+ stale delalloc mapping covered by a clean page that needs to be dirtied
+ again before the delalloc mapping can be converted. This stale delalloc
+ mapping can trip the direct I/O reads when done on the same region [7].
+
+iomap_folio_ops: Folio related operations structure for iomap.
+================
+When filesystem sets folio_ops in an iomap mapping it returns, ->get_folio()
+and ->put_folio() will be called for each folio written to during write iter
+time of buffered writes.
+ - get_folio: iomap will call ->get_folio() for every folio of the returned
+ iomap mapping. Currently gfs2 uses this to start the transaction before
+ taking the folio lock [8].
+
+ - put_folio: iomap will call ->put_folio() once the data has been written to
+ for each folio of the returned iomap mapping. GFS2 uses this to add data
+ bufs to the transaction before unlocking the folio and then ending the
+ transaction [9].
+
+ - iomap_valid: Filesystem internal extent map can change while iomap is
+ iterating each folio of a cached iomap, so this hook allows iomap to detect
+ that the iomap needs to be refreshed during a long running write operation.
+ Filesystems can store an internal state (e.g. a sequence no.) in
+ iomap->validity_cookie when the iomap is first mapped, to be able to detect
+ changes between the mapping time and whenever iomap calls ->iomap_valid().
+ This gets called with the locked folio. See iomap_write_begin() for more
+ comments around ->iomap_valid() [10].
+
+
+Locking
+========
+iomap assumes two layers of locking. It requires locking above the iomap layer
+for IO serialisation (i_rwsem, invalidation lock) which is generally taken
+before calling into iomap iter functions. There is also locking below iomap for
+mapping/allocation serialisation on an inode (e.g. XFS_ILOCK or i_data_sem in
+ext4 etc) that is usually taken inside the mapping methods which filesystems
+supplied to the iomap infrastructure. This layer of locking needs to be
+independent of the IO path serialisation locking as it nests inside in the IO
+path but is also used without the filesystem IO path locking protecting it
+(e.g. in the iomap writeback path).
+
+General Locking order in iomap is:
+inode->i_rwsem (shared or exclusive)
+ inode->i_mapping->invalidate_lock (exclusive)
+ folio_lock()
+ internal filesystem allocation lock (e.g. XFS_ILOCK or i_data_sem)
+
+
+Zeroing/Truncate Operations
+===========================
+Filesystems can use iomap provided helper functions e.g. iomap_zero_range(),
+iomap_truncate_page() & iomap_file_unshare() for various truncate/fallocate or
+any other similar operations that requires zeroing/truncate.
+See above functions for more details on how these can be used by individual
+filesystems.
+
+
+Guideline for filesystem conversion to iomap
+=============================================
+The right approach is to first implement ->iomap_begin and (if necessary)
+->iomap_end to allow iomap to obtain a read-only mapping of a file range. In
+most cases, this is a relatively trivial conversion of the existing get_block()
+callback for read-only mappings.
+
+i.e. rewrite the filesystem's get_block(create = false) implementation to use
+the new ->iomap_begin() implementation. i.e. get_block wraps around the outside
+and converts the information from bufferhead-based map to what iomap expects.
+This will convert all the existing read-only mapping users to use the new iomap
+mapping function internally. This way the iomap mapping function can be further
+tested without needing to implement any other iomap APIs.
+
+FIEMAP operation is a really good first target because it is trivial to
+implement support for it and then to determine that the extent map iteration is
+correct from userspace. i.e. if FIEMAP is returning the correct information,
+it's a good sign that other read-only mapping operations will also do the right
+thing.
+
+Once everything is working like this, then convert all the other read-only
+mapping operations to use iomap. Done one at a time, regressions should be self
+evident. The only likely complexity at this point will be the buffered read IO
+path because of bufferheads. The buffered read IO paths doesn't need to be
+converted yet, though the direct IO read path should be converted in this phase.
+
+The next thing to do is implement get_blocks(create = true) functionality in the
+->iomap_begin/end() methods. Then convert the direct IO write path to iomap, and
+start running fsx w/ DIO enabled in earnest on filesystem. This will flush out
+lots of data integrity corner case bug that the new write mapping implementation
+introduces.
+
+(TODO - get more info on this from Dave): At this point, converting the entire
+get_blocks() path to call the iomap functions and convert the iomaps to
+bufferhead maps is possible. This will get the entire filesystem using the new
+mapping functions, and they should largely be debugged and working correctly
+after this step.
+
+This now largely leaves the buffered read and write paths to be converted. The
+mapping functions should all work correctly, so all that needs to be done is
+rewriting all the code that interfaces with bufferheads to interface with iomap
+and folios. It is rather easier first to get regular file I/O (without any
+fancy feature like fscrypt, fsverity, data=journaling) converted to use iomap
+and then work on directory handling conversion to iomap.
+
+The rest is left as an exercise for the reader, as it will be different for
+every filesystem.
+
+References:
+===========
+[1]: https://lore.kernel.org/all/[email protected]/
+[2]: https://lore.kernel.org/all/[email protected]/
+[3]: https://lore.kernel.org/all/[email protected]/
+[4]: https://lore.kernel.org/all/[email protected]/
+[5]: https://lore.kernel.org/all/[email protected]/
+[6]: https://lore.kernel.org/linux-xfs/[email protected]/
+[7]: https://lore.kernel.org/all/[email protected]/
+[8]: https://lore.kernel.org/all/[email protected]/
+[9]: https://lore.kernel.org/all/[email protected]/
+[10]: https://lore.kernel.org/all/[email protected]/
+[11]: https://lore.kernel.org/all/[email protected]/
+[12]: https://lore.kernel.org/all/[email protected]/
+[13]: LWN article on iomap https://lwn.net/Articles/935934/
+[14]: Kernel newbies page on iomap https://kernelnewbies.org/KernelProjects/iomap
diff --git a/MAINTAINERS b/MAINTAINERS
index ebf03f5f0619..41e739a94927 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -8302,6 +8302,7 @@ R: Darrick J. Wong <[email protected]>
L: [email protected]
L: [email protected]
S: Supported
+F: Documentation/filesystems/iomap.txt
F: fs/iomap/
F: include/linux/iomap.h
--
2.44.0
> +i.e. at a high level how iomap does write iter is [1]::
> + user IO
> + loop for file IO range
> + loop for each mapped extent
> + if (buffered) {
> + loop for each page/folio {
> + instantiate page cache
> + copy data to/from page cache
> + update page cache state
> + }
> + } else { /* direct IO */
> + loop for each bio {
> + pack user pages into bio
> + submit bio
> + }
> + }
> + }
> + }
This would probably be easier to follow (and match the actual code)
with two separate flows for buffered vs direct I/O.
The loop for each bio in direct I/O is also not wrong, but maybe a
bit confusing as we really map over a pinned memory range. The code
just has a little optimization to directly place that into a bio.
> +Guideline for filesystem conversion to iomap
> +=============================================
Maybe split this into a separate file?
On Fri 03-05-24 19:40:19, Ritesh Harjani (IBM) wrote:
> This adds an initial first draft of iomap documentation. Hopefully this
> will come useful to those who are looking for converting their
> filesystems to iomap. Currently this is in text format since this is the
> first draft. I would prefer to work on it's conversion to .rst once we
> receive the feedback/review comments on the overall content of the document.
> But feel free to let me know if we prefer it otherwise.
>
> A lot of this has been collected from various email conversations, code
> comments, commit messages and/or my own understanding of iomap. Please
> note a large part of this has been taken from Dave's reply to last iomap
> doc patchset. Thanks to Dave, Darrick, Matthew, Christoph and other iomap
> developers who have taken time to explain the iomap design in various emails,
> commits, comments etc.
>
> Please note that this is not the complete iomap design doc. but a brief
> overview of iomap.
>
> Signed-off-by: Ritesh Harjani (IBM) <[email protected]>
> ---
> Documentation/filesystems/index.rst | 1 +
> Documentation/filesystems/iomap.txt | 289 ++++++++++++++++++++++++++++
> MAINTAINERS | 1 +
> 3 files changed, 291 insertions(+)
> create mode 100644 Documentation/filesystems/iomap.txt
>
> diff --git a/Documentation/filesystems/index.rst b/Documentation/filesystems/index.rst
> index 1f9b4c905a6a..c17b5a2ec29b 100644
> --- a/Documentation/filesystems/index.rst
> +++ b/Documentation/filesystems/index.rst
> @@ -34,6 +34,7 @@ algorithms work.
> seq_file
> sharedsubtree
> idmappings
> + iomap
>
> automount-support
>
> diff --git a/Documentation/filesystems/iomap.txt b/Documentation/filesystems/iomap.txt
> new file mode 100644
> index 000000000000..4f766b129975
> --- /dev/null
> +++ b/Documentation/filesystems/iomap.txt
> @@ -0,0 +1,289 @@
> +Introduction
> +============
> +iomap is a filesystem centric mapping layer that maps file's logical offset
> +ranges to physical extents. It provides several iterator APIs which filesystems
> +can use for doing various file_operations, address_space_operations,
> +vm_operations, inode_operations etc. It supports APIs for doing direct-io,
> +buffered-io, lseek, dax-io, page-mkwrite, swap_activate and extent reporting
> +via fiemap.
> +
> +iomap is termed above as filesystem centric because it first calls
> +->iomap_begin() phase supplied by the filesystem to get a mapped extent and
^^^^ 'phase' sounds strange to me here. 'callback' or
'method'?
> +then loops over each folio within that mapped extent.
> +This is useful for filesystems because now they can allocate/reserve a much
> +larger extent at begin phase v/s the older approach of doing block allocation
> +of one block at a time by calling filesystem's provided ->get_blocks() routine.
> +
> +i.e. at a high level how iomap does write iter is [1]::
> + user IO
> + loop for file IO range
> + loop for each mapped extent
> + if (buffered) {
> + loop for each page/folio {
> + instantiate page cache
> + copy data to/from page cache
> + update page cache state
> + }
> + } else { /* direct IO */
> + loop for each bio {
> + pack user pages into bio
> + submit bio
> + }
> + }
> + }
> + }
I agree with Christoph that this would be better split to buffer and direct
IO parts. In particular because the combined handler like shown above does
not exist in iomap...
> +Motivation for filesystems to convert to iomap
> +===============================================
> +1. iomap is a modern filesystem mapping layer VFS abstraction.
> +2. It also supports large folios for buffered-writes. Large folios can help
> +improve filesystem buffered-write performance and can also improve overall
> +system performance.
> +3. Less maintenance overhead for individual filesystem maintainers.
> +iomap is able to abstract away common folio-cache related operations from the
> +filesystem to within the iomap layer itself. e.g. allocating, instantiating,
> +locking and unlocking of the folios for buffered-write operations are now taken
> +care within iomap. No ->write_begin(), ->write_end() or direct_IO
^^^ of ^^ ->direct_IO
> +address_space_operations are required to be implemented by filesystem using
> +iomap.
> +
> +
> +blocksize < pagesize path/large folios
> +======================================
> +Large folio support or systems with large pagesize e.g 64K on Power/ARM64 and
^^^ e.g.
> +4k blocksize, needs filesystems to support bs < ps paths. iomap embeds
> +struct iomap_folio_state (ifs) within folio->private. ifs maintains uptodate
> +and dirty bits for each subblock within the folio. Using ifs iomap can track
> +update and dirty status of each block within the folio. This helps in supporting
> +bs < ps path for such systems with large pagesize or with large folios [2].
> +
> +
> +struct iomap
> +=============
> +This structure defines a file mapping information of logical file offset range
> +to a physical mapped extent on which an IO operation could be performed.
> +An iomap reflects a single contiguous range of filesystem address space that
> +either exists in memory or on a block device.
> +1. The type field within iomap determines what type the range maps to e.g.
> +IOMAP_HOLE, IOMAP_DELALLOC, IOMAP_UNWRITTEN etc.
> +
> +2. The flags field represent the state flags (e.g. IOMAP_F_*), most of which are
> +set the by the filesystem during mapping time that indicates how iomap
> +infrastructure should modify it's behaviour to do the right thing.
> +
> +3. private void pointer within iomap allows the filesystems to pass filesystem's
> +private data from ->iomap_begin() to ->iomap_end() [3].
> +(see include/linux/iomap.h for more details)
> +
> +
> +iomap operations
> +================
> +iomap provides different iterator APIs for direct-io, buffered-io, lseek,
> +dax-io, page-mkwrite, swap_activate and extent reporting via fiemap. It requires
> +various struct operations to be prepared by filesystem and to be supplied to
> +iomap iterator APIs either at the beginning of iomap api call or attaching it
> +during the mapping callback time e.g iomap_folio_ops is attached to
^^^ e.g.
> +iomap->folio_ops during ->iomap_begin() call.
> +
> +Following provides various ops to be supplied by filesystems to iomap layer for
> +doing different I/O types as discussed above.
^^^ performing
> +iomap_ops: IO interface specific operations
> +==========
> +The methods are designed to be used as pairs. The begin method creates the iomap
^^^ I'd use the full
name here as it's the first occurence in the section. Hence 'iomap_begin'.
> +and attaches all the necessary state and information which subsequent iomap
> +methods & their callbacks might need. Once the iomap infrastructure has finished
> +working on the iomap it will call the end method to allow the filesystem to tear
^^ iomap_end
> +down any unused space and/or structures it created for the specific iomap
> +context.
> +
> +Almost all iomap iterator APIs require filesystems to define iomap_ops so that
> +filesystems can be called into for providing logical to physical extent mapping,
> +wherever required. This is required by the iomap iter apis used for the
> +operations which are listed in the beginning of "iomap operations" section.
> + - iomap_begin: This either returns an existing mapping or reserve/allocates a
^^^ reserves
> + new mapping when called by iomap. pos and length are passed as function
> + arguments. Filesystem returns the new mapping information within struct
> + iomap which also gets passed as a function argument. Filesystems should
> + provide the type of this extent in iomap->type for e.g. IOMAP_HOLE,
> + IOMAP_UNWRITTEN and it should set the iomap->flags e.g. IOMAP_F_*
> + (see details in include/linux/iomap.h)
> +
> + Note that iomap_begin() call has srcmap passed as another argument. This is
> + mainly used only during the begin phase for COW mappings to identify where
> + the reads are to be performed from. Filesystems needs to fill that mapping
^^ need
> + information if iomap should read data for partially written blocks from a
> + different location than the write target [4].
> +
> + - iomap_end: Commit and/or unreserve space which was previously allocated
> + using iomap_begin. During buffered-io, when a short writes occurs,
> + filesystem may need to remove the reserved space that was allocated
> + during ->iomap_begin. For filesystems that use delalloc allocation, we need
^^^ delayed
> + to punch out delalloc extents from the range that are not dirty in the page
> + cache. See comments in iomap_file_buffered_write_punch_delalloc() for more
> + info [5][6].
> +
> +iomap_dio_ops: Direct I/O operations structure for iomap.
> +=============
> +This gets passed with iomap_dio_rw(), so that iomap can call certain operations
> +before submission or on completion of DIRECT_IO.
^^^ I'd use just 'direct IO' or
'DIO'
> + - end_io: Required after bio completion for e.g. for conversion of unwritten
^^^ Well, the callback isn't really required AFAICT. So I'd
write: 'Method called after bio completion. Can be used for example for
conversion of unwritten extents."
> + extents.
> +
> + - submit_io: This hook is required for e.g. by filesystems like btrfs who
> + would like to do things like data?replication for fs-handled?RAID.
Again somewhat hard to understand for me. How about: "Optional method to be
called by iomap instead of simply calling submit_bio(). Useful for example
for filesystems wanting to do data replication on submission of IO."
> +
> + - bio_set: This allows the filesystem to provide custom bio_set for allocating
> + direct I/O bios. This will allow the filesystem who uses ->submit_io hook to
^^ which
> + stash away additional information for filesystem use. Filesystems will
^^^
"In case the filesystem will provide their custom ->bi_end_io function, it
needs to call iomap_dio_bio_end_io() from the custom handler to handle dio
completion [11]".
Also I'd move this note to the submit_io part above as it mostly relates to
that AFAIU.
> + provide their custom ->bi_end_io function completion which should then call
> + into iomap_dio_bio_end_io() for dio completion [11].
> +
> +iomap_writeback_ops: Writeback operations structure for iomap
> +====================
> +Writeback address space operations e.g. iomap_writepages(), requires the
> +filesystem to pass this ops field.
> + - map_blocks: map the blocks at the writeback time. This is called once per
> + folio. Filesystems can return an existing mapping from a previous call if
> + that mapping is still valid. This can race with paths which can invalidate
> + previous mappings such as fallocate/truncate. Hence filesystems must have
> + a mechanism by which it can validate if the previous mapping provided is
^^ they
> + still valid. Filesystems might need a per inode seq counter which can be
> + used to verify if the underlying mapping of logical to physical blocks
> + has changed since the last ->map_blocks call or not.
> + They can then use wpc->iomap->validity_cookie to cache their seq count in
> + ->map_blocks call [6].
> +
> + - prepare_ioend: Allows filesystems to process the extents before submission
> + for e.g. convert COW extents to regular. This also allows filesystem to
> + hook in a custom completion handler for processing bio completion e.g.
> + conversion of unwritten extents.
> + Note that ioends might need to be processed as an atomic completion unit
> + (using transactions) when all the chained bios in the ioend have completed
> + (e.g. for conversion of unwritten extents). iomap provides some helper
> + methods for ioend merging and completion [12]. Look at comments in
> + xfs_end_io() routine for more info.
> +
> + - discard_folio: In case if the filesystem has any delalloc blocks on it,
> + then those needs to be punched out in this call. Otherwise, it may leave a
> + stale delalloc mapping covered by a clean page that needs to be dirtied
> + again before the delalloc mapping can be converted. This stale delalloc
> + mapping can trip the direct I/O reads when done on the same region [7].
Here I miss explanation when iomap calls this callback. Apparently when
mapping of folio for writeback fails for some reason.
> +iomap_folio_ops: Folio related operations structure for iomap.
> +================
> +When filesystem sets folio_ops in an iomap mapping it returns, ->get_folio()
> +and ->put_folio() will be called for each folio written to during write iter
> +time of buffered writes.
> + - get_folio: iomap will call ->get_folio() for every folio of the returned
> + iomap mapping. Currently gfs2 uses this to start the transaction before
> + taking the folio lock [8].
> +
> + - put_folio: iomap will call ->put_folio() once the data has been written to
^^^
copied into the folio for each folio of the returned iomap mapping.
> + for each folio of the returned iomap mapping. GFS2 uses this to add data
> + bufs to the transaction before unlocking the folio and then ending the
> + transaction [9].
> +
> + - iomap_valid: Filesystem internal extent map can change while iomap is
^^^ In case filesystem internal extent map ...
> + iterating each folio of a cached iomap, so this hook allows iomap to detect
> + that the iomap needs to be refreshed during a long running write operation.
> + Filesystems can store an internal state (e.g. a sequence no.) in
> + iomap->validity_cookie when the iomap is first mapped, to be able to detect
> + changes between the mapping time and whenever iomap calls ->iomap_valid().
> + This gets called with the locked folio. See iomap_write_begin() for more
> + comments around ->iomap_valid() [10].
> +
> +
> +Locking
> +========
> +iomap assumes two layers of locking. It requires locking above the iomap layer
> +for IO serialisation (i_rwsem, invalidation lock) which is generally taken
> +before calling into iomap iter functions. There is also locking below iomap for
> +mapping/allocation serialisation on an inode (e.g. XFS_ILOCK or i_data_sem in
> +ext4 etc) that is usually taken inside the mapping methods which filesystems
> +supplied to the iomap infrastructure. This layer of locking needs to be
> +independent of the IO path serialisation locking as it nests inside in the IO
> +path but is also used without the filesystem IO path locking protecting it
> +(e.g. in the iomap writeback path).
> +
> +General Locking order in iomap is:
> +inode->i_rwsem (shared or exclusive)
> + inode->i_mapping->invalidate_lock (exclusive)
> + folio_lock()
> + internal filesystem allocation lock (e.g. XFS_ILOCK or i_data_sem)
> +
> +
> +Zeroing/Truncate Operations
> +===========================
> +Filesystems can use iomap provided helper functions e.g. iomap_zero_range(),
> +iomap_truncate_page() & iomap_file_unshare() for various truncate/fallocate or
> +any other similar operations that requires zeroing/truncate.
^^^ require
> +See above functions for more details on how these can be used by individual
> +filesystems.
> +
> +
> +Guideline for filesystem conversion to iomap
> +=============================================
> +The right approach is to first implement ->iomap_begin and (if necessary)
> +->iomap_end to allow iomap to obtain a read-only mapping of a file range. In
> +most cases, this is a relatively trivial conversion of the existing get_block()
> +callback for read-only mappings.
> +
> +i.e. rewrite the filesystem's get_block(create = false) implementation to use
^^^ I.e.
> +the new ->iomap_begin() implementation. i.e. get_block wraps around the outside
^^^ I don't understand this
sentence...
> +and converts the information from bufferhead-based map to what iomap expects.
> +This will convert all the existing read-only mapping users to use the new iomap
> +mapping function internally. This way the iomap mapping function can be further
> +tested without needing to implement any other iomap APIs.
> +
> +FIEMAP operation is a really good first target because it is trivial to
> +implement support for it and then to determine that the extent map iteration is
> +correct from userspace. i.e. if FIEMAP is returning the correct information,
^^ I.e.,
> +it's a good sign that other read-only mapping operations will also do the right
> +thing.
> +
> +Once everything is working like this, then convert all the other read-only
> +mapping operations to use iomap. Done one at a time, regressions should be self
> +evident. The only likely complexity at this point will be the buffered read IO
> +path because of bufferheads. The buffered read IO paths doesn't need to be
> +converted yet, though the direct IO read path should be converted in this phase.
> +
> +The next thing to do is implement get_blocks(create = true) functionality in the
> +->iomap_begin/end() methods. Then convert the direct IO write path to iomap, and
> +start running fsx w/ DIO enabled in earnest on filesystem. This will flush out
> +lots of data integrity corner case bug that the new write mapping implementation
^^^ bugs
> +introduces.
> +
> +(TODO - get more info on this from Dave): At this point, converting the entire
> +get_blocks() path to call the iomap functions and convert the iomaps to
> +bufferhead maps is possible. This will get the entire filesystem using the new
^^^ make ^^ use
> +mapping functions, and they should largely be debugged and working correctly
> +after this step.
> +
> +This now largely leaves the buffered read and write paths to be converted. The
> +mapping functions should all work correctly, so all that needs to be done is
> +rewriting all the code that interfaces with bufferheads to interface with iomap
> +and folios. It is rather easier first to get regular file I/O (without any
> +fancy feature like fscrypt, fsverity, data=journaling) converted to use iomap
> +and then work on directory handling conversion to iomap.
Well, I belive this comment about directories is pretty much specific for
ext2. Iomap never attempted to provide any infrastructure for metadata
handling - each filesystem is on its own here. ext2 is kind of special as
it was experimenting with handling directories more like data. In
retrospect I don't think it was particularly successful experiment but you
never know until you try :).
> +
> +The rest is left as an exercise for the reader, as it will be different for
> +every filesystem.
Honza
--
Jan Kara <[email protected]>
SUSE Labs, CR
On Fri, May 03, 2024 at 07:40:19PM +0530, Ritesh Harjani (IBM) wrote:
> This adds an initial first draft of iomap documentation. Hopefully this
> will come useful to those who are looking for converting their
> filesystems to iomap. Currently this is in text format since this is the
> first draft. I would prefer to work on it's conversion to .rst once we
> receive the feedback/review comments on the overall content of the document.
> But feel free to let me know if we prefer it otherwise.
>
> A lot of this has been collected from various email conversations, code
> comments, commit messages and/or my own understanding of iomap. Please
> note a large part of this has been taken from Dave's reply to last iomap
> doc patchset. Thanks to Dave, Darrick, Matthew, Christoph and other iomap
> developers who have taken time to explain the iomap design in various emails,
> commits, comments etc.
>
> Please note that this is not the complete iomap design doc. but a brief
> overview of iomap.
>
> Signed-off-by: Ritesh Harjani (IBM) <[email protected]>
> ---
> Documentation/filesystems/index.rst | 1 +
> Documentation/filesystems/iomap.txt | 289 ++++++++++++++++++++++++++++
> MAINTAINERS | 1 +
> 3 files changed, 291 insertions(+)
> create mode 100644 Documentation/filesystems/iomap.txt
>
> diff --git a/Documentation/filesystems/index.rst b/Documentation/filesystems/index.rst
> index 1f9b4c905a6a..c17b5a2ec29b 100644
> --- a/Documentation/filesystems/index.rst
> +++ b/Documentation/filesystems/index.rst
> @@ -34,6 +34,7 @@ algorithms work.
> seq_file
> sharedsubtree
> idmappings
> + iomap
>
> automount-support
>
> diff --git a/Documentation/filesystems/iomap.txt b/Documentation/filesystems/iomap.txt
> new file mode 100644
> index 000000000000..4f766b129975
> --- /dev/null
> +++ b/Documentation/filesystems/iomap.txt
> @@ -0,0 +1,289 @@
> +Introduction
> +============
> +iomap is a filesystem centric mapping layer that maps file's logical offset
It's really more of a library for filesystem implementations that need
to handle file operations that involve physical storage devices.
> +ranges to physical extents. It provides several iterator APIs which filesystems
Minor style nit: Start each sentence on a new line, so that future
revisions to a sentence don't produce diff for adjoining sentences.
> +can use for doing various file_operations, address_space_operations,
"...for doing various file and pagecache operations, such as:
* Pagecache reads and writes
* Page faults
* Dirty pagecache writeback
* FIEMAP
* directio
* lseek
* swapfile activation
<etc>
> +vm_operations, inode_operations etc. It supports APIs for doing direct-io,
> +buffered-io, lseek, dax-io, page-mkwrite, swap_activate and extent reporting
> +via fiemap.
> +
> +iomap is termed above as filesystem centric because it first calls
> +->iomap_begin() phase supplied by the filesystem to get a mapped extent and
> +then loops over each folio within that mapped extent.
> +This is useful for filesystems because now they can allocate/reserve a much
> +larger extent at begin phase v/s the older approach of doing block allocation
> +of one block at a time by calling filesystem's provided ->get_blocks() routine.
I think this should be more general because all the iomap operations
work this way, not just the ones that involve folios:
"Unlike the classic Linux IO model which breaks file io into small units
(generally memory pages or blocks) and looks up space mappings on the
basis of that unit, the iomap model asks the filesystem for the largest
space mappings that it can create for a given file operation and
initiates operations on that basis.
This strategy improves the filesystem's visibility into the size of the
operation being performed, which enables it to combat fragmentation with
larger space allocations when possible.
Larger mappings improve runtime performance by amortizing the cost of a
mapping function call into the filesystem across a larger amount of
data."
"At a high level, an iomap operation looks like this:
for each byte in the operation range,
obtain space mapping via ->iomap_begin
for each sub-unit of work,
revalidate the mapping
do the work
increment file range cursor
if needed, release the mapping via ->iomap_end
"Each iomap operation will be covered in more detail below."
> +
> +i.e. at a high level how iomap does write iter is [1]::
> + user IO
> + loop for file IO range
> + loop for each mapped extent
> + if (buffered) {
> + loop for each page/folio {
> + instantiate page cache
> + copy data to/from page cache
> + update page cache state
> + }
> + } else { /* direct IO */
> + loop for each bio {
> + pack user pages into bio
> + submit bio
> + }
> + }
> + }
> + }
I agree with the others that each io operation (pagecache, directio,
etc) should be a separate section.
> +
> +
> +Motivation for filesystems to convert to iomap
> +===============================================
Maybe this is the section titled buffered IO?
> +1. iomap is a modern filesystem mapping layer VFS abstraction.
I don't think this is much of a justification -- buffer heads were
modern once.
> +2. It also supports large folios for buffered-writes. Large folios can help
> +improve filesystem buffered-write performance and can also improve overall
> +system performance.
How does it improve pagecache performance? Is this a result of needing
to take fewer locks? Is it because page table walks can stop early? Is
it because we can reduce the number of memcpy calls?
> +3. Less maintenance overhead for individual filesystem maintainers.
> +iomap is able to abstract away common folio-cache related operations from the
> +filesystem to within the iomap layer itself. e.g. allocating, instantiating,
> +locking and unlocking of the folios for buffered-write operations are now taken
> +care within iomap. No ->write_begin(), ->write_end() or direct_IO
> +address_space_operations are required to be implemented by filesystem using
> +iomap.
I think it's stronger to say that iomap abstracts away /all/ the
pagecache operations, which gets each fs implementation out of the
business of doing that itself.
> +
> +
> +blocksize < pagesize path/large folios
> +======================================
Is this a subsection? Should the annotation be "----" instead of "====" ?
> +Large folio support or systems with large pagesize e.g 64K on Power/ARM64 and
> +4k blocksize, needs filesystems to support bs < ps paths. iomap embeds
> +struct iomap_folio_state (ifs) within folio->private. ifs maintains uptodate
> +and dirty bits for each subblock within the folio. Using ifs iomap can track
> +update and dirty status of each block within the folio. This helps in supporting
> +bs < ps path for such systems with large pagesize or with large folios [2].
TBH I think it's sufficient to mention that the iomap pagecache
implementation tracks uptodate and dirty status for each the fsblocks
cached by a folio to reduce read and write amplification. No need to go
into the details of exactly how that happens.
Perhaps also mention that variable sized folios are required to handle
fsblock > pagesize filesystems.
> +
> +
> +struct iomap
> +=============
> +This structure defines a file mapping information of logical file offset range
> +to a physical mapped extent on which an IO operation could be performed.
> +An iomap reflects a single contiguous range of filesystem address space that
> +either exists in memory or on a block device.
"This structure contains information to map a range of file data to
physical space on a storage device.
The information is useful for translating file operations into action.
The actions taken are specific to the target of the operation, such as
disk cache, physical storage devices, or another part of the kernel."
"Each iomap operation will pass operation flags as needed to the
->iomap_begin function.
These flags will be documented in the operation-specific sections below.
For a write operation, IOMAP_WRITE will be set.
For any other operation, IOMAP_WRITE will not be set."
...and then down in the section on pagecache operations, you can do
something like:
"For pagecache operations, the @flags argument to ->iomap_begin can be
any of the following:"
* IOMAP_WRITE: write to a file
* IOMAP_WRITE | IOMAP_UNSHARE: if any of the space backing a file is
shared, mark that part of the pagecache dirty so that it will be
unshared during writeback
* IOMAP_WRITE | IOMAP_FAULT: this is a write fault for mmapped
pagecache
* IOMAP_ZERO: zero parts of a file
* 0: read from the pagecache
Ugh, this namespace collides with IOMAP_{HOLE..INLINE}. Sigh.
> +1. The type field within iomap determines what type the range maps to e.g.
> +IOMAP_HOLE, IOMAP_DELALLOC, IOMAP_UNWRITTEN etc.
Maybe have a list here stating what a "DELALLOC" is? Not all readers
are going to know what these types are.
* IOMAP_HOLE: No storage has been allocated. This must never be
returned in response to an IOMAP_WRITE operation because writes must
allocate and map space, and return the mapping.
* IOMAP_DELALLOC: A promise to allocate space at a later time ("delayed
allocation"). If the filesystem returns IOMAP_F_NEW here and the
write fails, the ->iomap_end function must delete the reservation.
* IOMAP_MAPPED: The file range maps to this space on the storage
device. The device is returned in @bdev or @dax_dev, and the device
address of the space is returned in @addr.
* IOMAP_UNWRITTEN: The file range maps to this space on the storage
device, but the space has not yet been initialized. The device is
returned in @bdev or @dax_dev, and the device address of the space is
returned in @addr. Reads will return zeroes, and the write ioend
must update the mapping to MAPPED.
* IOMAP_INLINE: The file range maps to the in-memory buffer
@inline_data. For IOMAP_WRITE operations, the ->iomap_end function
presumable handles persisting the data.
> +2. The flags field represent the state flags (e.g. IOMAP_F_*), most of which are
> +set the by the filesystem during mapping time that indicates how iomap
> +infrastructure should modify it's behaviour to do the right thing.
I think you should summarize the IOMAP_F_ flags here.
> +3. private void pointer within iomap allows the filesystems to pass filesystem's
> +private data from ->iomap_begin() to ->iomap_end() [3].
> +(see include/linux/iomap.h for more details)
4. Maybe we should mention what bdev/dax_dev/inline_data do here?
5. What does the validity cookie do?
> +
> +
> +iomap operations
> +================
> +iomap provides different iterator APIs for direct-io, buffered-io, lseek,
> +dax-io, page-mkwrite, swap_activate and extent reporting via fiemap. It requires
> +various struct operations to be prepared by filesystem and to be supplied to
> +iomap iterator APIs either at the beginning of iomap api call or attaching it
> +during the mapping callback time e.g iomap_folio_ops is attached to
> +iomap->folio_ops during ->iomap_begin() call.
> +
> +Following provides various ops to be supplied by filesystems to iomap layer for
> +doing different I/O types as discussed above.
> +
> +iomap_ops: IO interface specific operations
> +==========
> +The methods are designed to be used as pairs. The begin method creates the iomap
> +and attaches all the necessary state and information which subsequent iomap
> +methods & their callbacks might need. Once the iomap infrastructure has finished
> +working on the iomap it will call the end method to allow the filesystem to tear
> +down any unused space and/or structures it created for the specific iomap
> +context.
> +
> +Almost all iomap iterator APIs require filesystems to define iomap_ops so that
> +filesystems can be called into for providing logical to physical extent mapping,
> +wherever required. This is required by the iomap iter apis used for the
> +operations which are listed in the beginning of "iomap operations" section.
> + - iomap_begin: This either returns an existing mapping or reserve/allocates a
> + new mapping when called by iomap. pos and length are passed as function
> + arguments. Filesystem returns the new mapping information within struct
> + iomap which also gets passed as a function argument. Filesystems should
> + provide the type of this extent in iomap->type for e.g. IOMAP_HOLE,
> + IOMAP_UNWRITTEN and it should set the iomap->flags e.g. IOMAP_F_*
> + (see details in include/linux/iomap.h)
> +
> + Note that iomap_begin() call has srcmap passed as another argument. This is
> + mainly used only during the begin phase for COW mappings to identify where
> + the reads are to be performed from. Filesystems needs to fill that mapping
> + information if iomap should read data for partially written blocks from a
> + different location than the write target [4].
> +
> + - iomap_end: Commit and/or unreserve space which was previously allocated
> + using iomap_begin. During buffered-io, when a short writes occurs,
> + filesystem may need to remove the reserved space that was allocated
> + during ->iomap_begin. For filesystems that use delalloc allocation, we need
> + to punch out delalloc extents from the range that are not dirty in the page
> + cache. See comments in iomap_file_buffered_write_punch_delalloc() for more
> + info [5][6].
I think these three sections "struct iomap", "iomap operations", and
"iomap_ops" should come first before you talk about specific things like
buffered io operations.
I'm going to stop here for the day.
--D
> +
> +iomap_dio_ops: Direct I/O operations structure for iomap.
> +=============
> +This gets passed with iomap_dio_rw(), so that iomap can call certain operations
> +before submission or on completion of DIRECT_IO.
> + - end_io: Required after bio completion for e.g. for conversion of unwritten
> + extents.
> +
> + - submit_io: This hook is required for e.g. by filesystems like btrfs who
> + would like to do things like data?replication for fs-handled?RAID.
> +
> + - bio_set: This allows the filesystem to provide custom bio_set for allocating
> + direct I/O bios. This will allow the filesystem who uses ->submit_io hook to
> + stash away additional information for filesystem use. Filesystems will
> + provide their custom ->bi_end_io function completion which should then call
> + into iomap_dio_bio_end_io() for dio completion [11].
> +
> +iomap_writeback_ops: Writeback operations structure for iomap
> +====================
> +Writeback address space operations e.g. iomap_writepages(), requires the
> +filesystem to pass this ops field.
> + - map_blocks: map the blocks at the writeback time. This is called once per
> + folio. Filesystems can return an existing mapping from a previous call if
> + that mapping is still valid. This can race with paths which can invalidate
> + previous mappings such as fallocate/truncate. Hence filesystems must have
> + a mechanism by which it can validate if the previous mapping provided is
> + still valid. Filesystems might need a per inode seq counter which can be
> + used to verify if the underlying mapping of logical to physical blocks
> + has changed since the last ->map_blocks call or not.
> + They can then use wpc->iomap->validity_cookie to cache their seq count in
> + ->map_blocks call [6].
> +
> + - prepare_ioend: Allows filesystems to process the extents before submission
> + for e.g. convert COW extents to regular. This also allows filesystem to
> + hook in a custom completion handler for processing bio completion e.g.
> + conversion of unwritten extents.
> + Note that ioends might need to be processed as an atomic completion unit
> + (using transactions) when all the chained bios in the ioend have completed
> + (e.g. for conversion of unwritten extents). iomap provides some helper
> + methods for ioend merging and completion [12]. Look at comments in
> + xfs_end_io() routine for more info.
> +
> + - discard_folio: In case if the filesystem has any delalloc blocks on it,
> + then those needs to be punched out in this call. Otherwise, it may leave a
> + stale delalloc mapping covered by a clean page that needs to be dirtied
> + again before the delalloc mapping can be converted. This stale delalloc
> + mapping can trip the direct I/O reads when done on the same region [7].
> +
> +iomap_folio_ops: Folio related operations structure for iomap.
> +================
> +When filesystem sets folio_ops in an iomap mapping it returns, ->get_folio()
> +and ->put_folio() will be called for each folio written to during write iter
> +time of buffered writes.
> + - get_folio: iomap will call ->get_folio() for every folio of the returned
> + iomap mapping. Currently gfs2 uses this to start the transaction before
> + taking the folio lock [8].
> +
> + - put_folio: iomap will call ->put_folio() once the data has been written to
> + for each folio of the returned iomap mapping. GFS2 uses this to add data
> + bufs to the transaction before unlocking the folio and then ending the
> + transaction [9].
> +
> + - iomap_valid: Filesystem internal extent map can change while iomap is
> + iterating each folio of a cached iomap, so this hook allows iomap to detect
> + that the iomap needs to be refreshed during a long running write operation.
> + Filesystems can store an internal state (e.g. a sequence no.) in
> + iomap->validity_cookie when the iomap is first mapped, to be able to detect
> + changes between the mapping time and whenever iomap calls ->iomap_valid().
> + This gets called with the locked folio. See iomap_write_begin() for more
> + comments around ->iomap_valid() [10].
> +
> +
> +Locking
> +========
> +iomap assumes two layers of locking. It requires locking above the iomap layer
> +for IO serialisation (i_rwsem, invalidation lock) which is generally taken
> +before calling into iomap iter functions. There is also locking below iomap for
> +mapping/allocation serialisation on an inode (e.g. XFS_ILOCK or i_data_sem in
> +ext4 etc) that is usually taken inside the mapping methods which filesystems
> +supplied to the iomap infrastructure. This layer of locking needs to be
> +independent of the IO path serialisation locking as it nests inside in the IO
> +path but is also used without the filesystem IO path locking protecting it
> +(e.g. in the iomap writeback path).
> +
> +General Locking order in iomap is:
> +inode->i_rwsem (shared or exclusive)
> + inode->i_mapping->invalidate_lock (exclusive)
> + folio_lock()
> + internal filesystem allocation lock (e.g. XFS_ILOCK or i_data_sem)
> +
> +
> +Zeroing/Truncate Operations
> +===========================
> +Filesystems can use iomap provided helper functions e.g. iomap_zero_range(),
> +iomap_truncate_page() & iomap_file_unshare() for various truncate/fallocate or
> +any other similar operations that requires zeroing/truncate.
> +See above functions for more details on how these can be used by individual
> +filesystems.
> +
> +
> +Guideline for filesystem conversion to iomap
> +=============================================
> +The right approach is to first implement ->iomap_begin and (if necessary)
> +->iomap_end to allow iomap to obtain a read-only mapping of a file range. In
> +most cases, this is a relatively trivial conversion of the existing get_block()
> +callback for read-only mappings.
> +
> +i.e. rewrite the filesystem's get_block(create = false) implementation to use
> +the new ->iomap_begin() implementation. i.e. get_block wraps around the outside
> +and converts the information from bufferhead-based map to what iomap expects.
> +This will convert all the existing read-only mapping users to use the new iomap
> +mapping function internally. This way the iomap mapping function can be further
> +tested without needing to implement any other iomap APIs.
> +
> +FIEMAP operation is a really good first target because it is trivial to
> +implement support for it and then to determine that the extent map iteration is
> +correct from userspace. i.e. if FIEMAP is returning the correct information,
> +it's a good sign that other read-only mapping operations will also do the right
> +thing.
> +
> +Once everything is working like this, then convert all the other read-only
> +mapping operations to use iomap. Done one at a time, regressions should be self
> +evident. The only likely complexity at this point will be the buffered read IO
> +path because of bufferheads. The buffered read IO paths doesn't need to be
> +converted yet, though the direct IO read path should be converted in this phase.
> +
> +The next thing to do is implement get_blocks(create = true) functionality in the
> +->iomap_begin/end() methods. Then convert the direct IO write path to iomap, and
> +start running fsx w/ DIO enabled in earnest on filesystem. This will flush out
> +lots of data integrity corner case bug that the new write mapping implementation
> +introduces.
> +
> +(TODO - get more info on this from Dave): At this point, converting the entire
> +get_blocks() path to call the iomap functions and convert the iomaps to
> +bufferhead maps is possible. This will get the entire filesystem using the new
> +mapping functions, and they should largely be debugged and working correctly
> +after this step.
> +
> +This now largely leaves the buffered read and write paths to be converted. The
> +mapping functions should all work correctly, so all that needs to be done is
> +rewriting all the code that interfaces with bufferheads to interface with iomap
> +and folios. It is rather easier first to get regular file I/O (without any
> +fancy feature like fscrypt, fsverity, data=journaling) converted to use iomap
> +and then work on directory handling conversion to iomap.
> +
> +The rest is left as an exercise for the reader, as it will be different for
> +every filesystem.
> +
> +References:
> +===========
> +[1]: https://lore.kernel.org/all/[email protected]/
> +[2]: https://lore.kernel.org/all/[email protected]/
> +[3]: https://lore.kernel.org/all/[email protected]/
> +[4]: https://lore.kernel.org/all/[email protected]/
> +[5]: https://lore.kernel.org/all/[email protected]/
> +[6]: https://lore.kernel.org/linux-xfs/[email protected]/
> +[7]: https://lore.kernel.org/all/[email protected]/
> +[8]: https://lore.kernel.org/all/[email protected]/
> +[9]: https://lore.kernel.org/all/[email protected]/
> +[10]: https://lore.kernel.org/all/[email protected]/
> +[11]: https://lore.kernel.org/all/[email protected]/
> +[12]: https://lore.kernel.org/all/[email protected]/
> +[13]: LWN article on iomap https://lwn.net/Articles/935934/
> +[14]: Kernel newbies page on iomap https://kernelnewbies.org/KernelProjects/iomap
> diff --git a/MAINTAINERS b/MAINTAINERS
> index ebf03f5f0619..41e739a94927 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -8302,6 +8302,7 @@ R: Darrick J. Wong <[email protected]>
> L: [email protected]
> L: [email protected]
> S: Supported
> +F: Documentation/filesystems/iomap.txt
> F: fs/iomap/
> F: include/linux/iomap.h
>
> --
> 2.44.0
>
"Darrick J. Wong" <[email protected]> writes:
> On Fri, May 03, 2024 at 07:40:19PM +0530, Ritesh Harjani (IBM) wrote:
>> This adds an initial first draft of iomap documentation. Hopefully this
>> will come useful to those who are looking for converting their
>> filesystems to iomap. Currently this is in text format since this is the
>> first draft. I would prefer to work on it's conversion to .rst once we
>> receive the feedback/review comments on the overall content of the document.
>> But feel free to let me know if we prefer it otherwise.
>>
>> A lot of this has been collected from various email conversations, code
>> comments, commit messages and/or my own understanding of iomap. Please
>> note a large part of this has been taken from Dave's reply to last iomap
>> doc patchset. Thanks to Dave, Darrick, Matthew, Christoph and other iomap
>> developers who have taken time to explain the iomap design in various emails,
>> commits, comments etc.
>>
>> Please note that this is not the complete iomap design doc. but a brief
>> overview of iomap.
>>
>> Signed-off-by: Ritesh Harjani (IBM) <[email protected]>
>> ---
>> Documentation/filesystems/index.rst | 1 +
>> Documentation/filesystems/iomap.txt | 289 ++++++++++++++++++++++++++++
>> MAINTAINERS | 1 +
>> 3 files changed, 291 insertions(+)
>> create mode 100644 Documentation/filesystems/iomap.txt
>>
>> diff --git a/Documentation/filesystems/index.rst b/Documentation/filesystems/index.rst
>> index 1f9b4c905a6a..c17b5a2ec29b 100644
>> --- a/Documentation/filesystems/index.rst
>> +++ b/Documentation/filesystems/index.rst
>> @@ -34,6 +34,7 @@ algorithms work.
>> seq_file
>> sharedsubtree
>> idmappings
>> + iomap
>>
>> automount-support
>>
>> diff --git a/Documentation/filesystems/iomap.txt b/Documentation/filesystems/iomap.txt
>> new file mode 100644
>> index 000000000000..4f766b129975
>> --- /dev/null
>> +++ b/Documentation/filesystems/iomap.txt
>> @@ -0,0 +1,289 @@
>> +Introduction
>> +============
>> +iomap is a filesystem centric mapping layer that maps file's logical offset
>
> It's really more of a library for filesystem implementations that need
> to handle file operations that involve physical storage devices.
>
Maybe something like this...
iomap is a filesystem library for handling various filesystem operations
that involves mapping of file's logical offset ranges to physical extents.
>> +ranges to physical extents. It provides several iterator APIs which filesystems
>
> Minor style nit: Start each sentence on a new line, so that future
> revisions to a sentence don't produce diff for adjoining sentences.
>
I will try to keep that in mind wherever possible.
>> +can use for doing various file_operations, address_space_operations,
>
> "...for doing various file and pagecache operations, such as:
>
> * Pagecache reads and writes
> * Page faults
> * Dirty pagecache writeback
> * FIEMAP
> * directio
> * lseek
> * swapfile activation
> <etc>
>
Thanks this is more clear.
>> +vm_operations, inode_operations etc. It supports APIs for doing direct-io,
>> +buffered-io, lseek, dax-io, page-mkwrite, swap_activate and extent reporting
>> +via fiemap.
>> +
>> +iomap is termed above as filesystem centric because it first calls
>> +->iomap_begin() phase supplied by the filesystem to get a mapped extent and
>> +then loops over each folio within that mapped extent.
>> +This is useful for filesystems because now they can allocate/reserve a much
>> +larger extent at begin phase v/s the older approach of doing block allocation
>> +of one block at a time by calling filesystem's provided ->get_blocks() routine.
>
> I think this should be more general because all the iomap operations
> work this way, not just the ones that involve folios:
>
> "Unlike the classic Linux IO model which breaks file io into small units
> (generally memory pages or blocks) and looks up space mappings on the
> basis of that unit, the iomap model asks the filesystem for the largest
> space mappings that it can create for a given file operation and
> initiates operations on that basis.
> This strategy improves the filesystem's visibility into the size of the
> operation being performed, which enables it to combat fragmentation with
> larger space allocations when possible.
> Larger mappings improve runtime performance by amortizing the cost of a
> mapping function call into the filesystem across a larger amount of
> data."
>
> "At a high level, an iomap operation looks like this:
>
> for each byte in the operation range,
> obtain space mapping via ->iomap_begin
> for each sub-unit of work,
> revalidate the mapping
> do the work
> increment file range cursor
> if needed, release the mapping via ->iomap_end
>
Thanks for making it more general. I will use your above version.
> "Each iomap operation will be covered in more detail below."
>
>> +
>> +i.e. at a high level how iomap does write iter is [1]::
>> + user IO
>> + loop for file IO range
>> + loop for each mapped extent
>> + if (buffered) {
>> + loop for each page/folio {
>> + instantiate page cache
>> + copy data to/from page cache
>> + update page cache state
>> + }
>> + } else { /* direct IO */
>> + loop for each bio {
>> + pack user pages into bio
>> + submit bio
>> + }
>> + }
>> + }
>> + }
>
> I agree with the others that each io operation (pagecache, directio,
> etc) should be a separate section.
>
Actually the idea for adding this loop was mainly to show that
->iomap_begin operation first maps the extent and then we loop over each
folio. This is some sense is already covered in your paragraph above.
So I am not sure how much of a value it will add to add these loops for
individual operations. But I will re-asses that while doing v2.
>> +
>> +
>> +Motivation for filesystems to convert to iomap
>> +===============================================
>
> Maybe this is the section titled buffered IO?
>
No the idea here was to list the modern filesystem features iomap
library supports. e.g. large folios, upcoming atomic writes for
buffered-io, abstracts page cache operation completely...
But, I got your point. Let me find a better line for this section :)
>> +1. iomap is a modern filesystem mapping layer VFS abstraction.
>
> I don't think this is much of a justification -- buffer heads were
> modern once.
>
Sure depending upon what ends up being the section name. I will see what
needs to come here, or will drop it.
>> +2. It also supports large folios for buffered-writes. Large folios can help
>> +improve filesystem buffered-write performance and can also improve overall
>> +system performance.
>
> How does it improve pagecache performance? Is this a result of needing
> to take fewer locks? Is it because page table walks can stop early? Is
> it because we can reduce the number of memcpy calls?
>
You mean to ask how does large folios in iomap improves buffered-write
performance & system performance?
- less no. of struct folio entries to iterate over while doing
buffered-I/O.
- large folios in pagecache helps in reducing MM fragmentation.
- Smaller LRU lists size means, lesser work overhead for MM subsystems; means
better system performance.
I will go ahead and add these subpoints for point 2 then.
>> +3. Less maintenance overhead for individual filesystem maintainers.
>> +iomap is able to abstract away common folio-cache related operations from the
>> +filesystem to within the iomap layer itself. e.g. allocating, instantiating,
>> +locking and unlocking of the folios for buffered-write operations are now taken
>> +care within iomap. No ->write_begin(), ->write_end() or direct_IO
>> +address_space_operations are required to be implemented by filesystem using
>> +iomap.
>
> I think it's stronger to say that iomap abstracts away /all/ the
> pagecache operations, which gets each fs implementation out of the
> business of doing that itself.
>
Sure. Make sense. Will do that.
>> +
>> +
>> +blocksize < pagesize path/large folios
>> +======================================
>
> Is this a subsection? Should the annotation be "----" instead of "====" ?
>
Ok.
>> +Large folio support or systems with large pagesize e.g 64K on Power/ARM64 and
>> +4k blocksize, needs filesystems to support bs < ps paths. iomap embeds
>> +struct iomap_folio_state (ifs) within folio->private. ifs maintains uptodate
>> +and dirty bits for each subblock within the folio. Using ifs iomap can track
>> +update and dirty status of each block within the folio. This helps in supporting
>> +bs < ps path for such systems with large pagesize or with large folios [2].
>
> TBH I think it's sufficient to mention that the iomap pagecache
> implementation tracks uptodate and dirty status for each the fsblocks
> cached by a folio to reduce read and write amplification. No need to go
> into the details of exactly how that happens.
>
> Perhaps also mention that variable sized folios are required to handle
> fsblock > pagesize filesystems.
>
Ok.
>> +
>> +
>> +struct iomap
>> +=============
>> +This structure defines a file mapping information of logical file offset range
>> +to a physical mapped extent on which an IO operation could be performed.
>> +An iomap reflects a single contiguous range of filesystem address space that
>> +either exists in memory or on a block device.
>
> "This structure contains information to map a range of file data to
> physical space on a storage device.
> The information is useful for translating file operations into action.
> The actions taken are specific to the target of the operation, such as
> disk cache, physical storage devices, or another part of the kernel."
>
> "Each iomap operation will pass operation flags as needed to the
> ->iomap_begin function.
> These flags will be documented in the operation-specific sections below.
> For a write operation, IOMAP_WRITE will be set.
> For any other operation, IOMAP_WRITE will not be set."
>
> ...and then down in the section on pagecache operations, you can do
> something like:
>
> "For pagecache operations, the @flags argument to ->iomap_begin can be
> any of the following:"
>
> * IOMAP_WRITE: write to a file
>
> * IOMAP_WRITE | IOMAP_UNSHARE: if any of the space backing a file is
> shared, mark that part of the pagecache dirty so that it will be
> unshared during writeback
>
> * IOMAP_WRITE | IOMAP_FAULT: this is a write fault for mmapped
> pagecache
>
> * IOMAP_ZERO: zero parts of a file
>
> * 0: read from the pagecache
>
Ok. Thanks for this.
> Ugh, this namespace collides with IOMAP_{HOLE..INLINE}. Sigh.
>
>> +1. The type field within iomap determines what type the range maps to e.g.
>> +IOMAP_HOLE, IOMAP_DELALLOC, IOMAP_UNWRITTEN etc.
>
> Maybe have a list here stating what a "DELALLOC" is? Not all readers
> are going to know what these types are.
>
> * IOMAP_HOLE: No storage has been allocated. This must never be
> returned in response to an IOMAP_WRITE operation because writes must
> allocate and map space, and return the mapping.
>
> * IOMAP_DELALLOC: A promise to allocate space at a later time ("delayed
> allocation"). If the filesystem returns IOMAP_F_NEW here and the
> write fails, the ->iomap_end function must delete the reservation.
>
> * IOMAP_MAPPED: The file range maps to this space on the storage
> device. The device is returned in @bdev or @dax_dev, and the device
> address of the space is returned in @addr.
>
> * IOMAP_UNWRITTEN: The file range maps to this space on the storage
> device, but the space has not yet been initialized. The device is
> returned in @bdev or @dax_dev, and the device address of the space is
> returned in @addr. Reads will return zeroes, and the write ioend
> must update the mapping to MAPPED.
>
> * IOMAP_INLINE: The file range maps to the in-memory buffer
> @inline_data. For IOMAP_WRITE operations, the ->iomap_end function
> presumable handles persisting the data.
>
I was thinking maybe it's corresponding file will already have that
that's why, so we need not cover it here.
And I also wanted to kept initial RFC document as a brief overview.
But sure thanks for doing this. I will add this info in v2.
>> +2. The flags field represent the state flags (e.g. IOMAP_F_*), most of which are
>> +set the by the filesystem during mapping time that indicates how iomap
>> +infrastructure should modify it's behaviour to do the right thing.
>
> I think you should summarize the IOMAP_F_ flags here.
>
Sure. Thanks!
>> +3. private void pointer within iomap allows the filesystems to pass filesystem's
>> +private data from ->iomap_begin() to ->iomap_end() [3].
>> +(see include/linux/iomap.h for more details)
>
> 4. Maybe we should mention what bdev/dax_dev/inline_data do here?
>
Let me read about this.
> 5. What does the validity cookie do?
>
Sure, I will add that.
>> +
>> +
>> +iomap operations
>> +================
>> +iomap provides different iterator APIs for direct-io, buffered-io, lseek,
>> +dax-io, page-mkwrite, swap_activate and extent reporting via fiemap. It requires
>> +various struct operations to be prepared by filesystem and to be supplied to
>> +iomap iterator APIs either at the beginning of iomap api call or attaching it
>> +during the mapping callback time e.g iomap_folio_ops is attached to
>> +iomap->folio_ops during ->iomap_begin() call.
>> +
>> +Following provides various ops to be supplied by filesystems to iomap layer for
>> +doing different I/O types as discussed above.
>> +
>> +iomap_ops: IO interface specific operations
>> +==========
>> +The methods are designed to be used as pairs. The begin method creates the iomap
>> +and attaches all the necessary state and information which subsequent iomap
>> +methods & their callbacks might need. Once the iomap infrastructure has finished
>> +working on the iomap it will call the end method to allow the filesystem to tear
>> +down any unused space and/or structures it created for the specific iomap
>> +context.
>> +
>> +Almost all iomap iterator APIs require filesystems to define iomap_ops so that
>> +filesystems can be called into for providing logical to physical extent mapping,
>> +wherever required. This is required by the iomap iter apis used for the
>> +operations which are listed in the beginning of "iomap operations" section.
>> + - iomap_begin: This either returns an existing mapping or reserve/allocates a
>> + new mapping when called by iomap. pos and length are passed as function
>> + arguments. Filesystem returns the new mapping information within struct
>> + iomap which also gets passed as a function argument. Filesystems should
>> + provide the type of this extent in iomap->type for e.g. IOMAP_HOLE,
>> + IOMAP_UNWRITTEN and it should set the iomap->flags e.g. IOMAP_F_*
>> + (see details in include/linux/iomap.h)
>> +
>> + Note that iomap_begin() call has srcmap passed as another argument. This is
>> + mainly used only during the begin phase for COW mappings to identify where
>> + the reads are to be performed from. Filesystems needs to fill that mapping
>> + information if iomap should read data for partially written blocks from a
>> + different location than the write target [4].
>> +
>> + - iomap_end: Commit and/or unreserve space which was previously allocated
>> + using iomap_begin. During buffered-io, when a short writes occurs,
>> + filesystem may need to remove the reserved space that was allocated
>> + during ->iomap_begin. For filesystems that use delalloc allocation, we need
>> + to punch out delalloc extents from the range that are not dirty in the page
>> + cache. See comments in iomap_file_buffered_write_punch_delalloc() for more
>> + info [5][6].
>
> I think these three sections "struct iomap", "iomap operations", and
> "iomap_ops" should come first before you talk about specific things like
> buffered io operations.
>
Ok.
> I'm going to stop here for the day.
>
> --D
>
Thanks Darrick for taking time to do the extensive review.
I will take yours and others review into account and will work on v2.
-ritesh