Somebody (I think it was Uli) recently complained about this callback so
when I just remembered that I went and looked where it is used. Guess
what: nowhere. I think it was at one point used in the tx timeout
handler but that should probably do something else anyway.
Signed-off-by: Johannes Berg <[email protected]>
---
drivers/net/wireless/adm8211.c | 38 --------------------------------------
drivers/net/wireless/b43/main.c | 16 ----------------
drivers/net/wireless/rt2400pci.c | 1 -
drivers/net/wireless/rt2500pci.c | 1 -
drivers/net/wireless/rt2500usb.c | 1 -
drivers/net/wireless/rt2x00mac.c | 1 -
drivers/net/wireless/rt61pci.c | 1 -
drivers/net/wireless/rt73usb.c | 1 -
include/net/mac80211.h | 3 ---
9 files changed, 63 deletions(-)
--- wireless-dev.orig/include/net/mac80211.h 2007-08-15 01:02:15.440200043 +0200
+++ wireless-dev/include/net/mac80211.h 2007-08-15 01:02:20.420200043 +0200
@@ -564,9 +564,6 @@ struct ieee80211_ops {
int (*tx)(struct ieee80211_hw *hw, struct sk_buff *skb,
struct ieee80211_tx_control *control);
- /* Handler for performing hardware reset. */
- int (*reset)(struct ieee80211_hw *hw);
-
/*
* Called before the first netdevice attached to the hardware
* is enabled. This should turn on the hardware and must turn on
--- wireless-dev.orig/drivers/net/wireless/adm8211.c 2007-08-15 01:03:30.840200043 +0200
+++ wireless-dev/drivers/net/wireless/adm8211.c 2007-08-15 01:03:46.450200043 +0200
@@ -1648,43 +1648,6 @@ static void adm8211_stop(struct ieee8021
adm8211_free_rings(dev);
}
-static int adm8211_reset(struct ieee80211_hw *dev)
-{
- struct adm8211_priv *priv = dev->priv;
- int retval = 0;
-
- priv->nar = 0;
- ADM8211_CSR_WRITE(NAR, 0);
- ADM8211_CSR_WRITE(IER, 0);
- ADM8211_CSR_READ(NAR);
-
- adm8211_free_rings(dev);
-
- retval = adm8211_hw_reset(dev);
- if (retval) {
- printk(KERN_ERR "%s: hardware reset failed\n",
- wiphy_name(dev->wiphy));
- goto fail;
- }
-
- retval = adm8211_init_rings(dev);
- if (retval) {
- printk(KERN_ERR "%s: failed to initialize rings\n",
- wiphy_name(dev->wiphy));
- goto fail;
- }
-
- adm8211_hw_init(dev);
- adm8211_rf_set_channel(dev, priv->channel);
-
- ADM8211_CSR_WRITE(IER, ADM8211_INTMASK);
- adm8211_update_mode(dev);
- ADM8211_CSR_WRITE(RDR, 0);
-
-fail:
- return retval;
-}
-
static void adm8211_calc_durations(int *dur, int *plcp, size_t payload_len, int len,
int plcp_signal, int short_preamble)
{
@@ -1883,7 +1846,6 @@ static int adm8211_alloc_rings(struct ie
static const struct ieee80211_ops adm8211_ops = {
.tx = adm8211_tx,
- .reset = adm8211_reset,
.start = adm8211_start,
.stop = adm8211_stop,
.add_interface = adm8211_add_interface,
--- wireless-dev.orig/drivers/net/wireless/b43/main.c 2007-08-15 01:03:31.340200043 +0200
+++ wireless-dev/drivers/net/wireless/b43/main.c 2007-08-15 01:04:28.440200043 +0200
@@ -2515,21 +2515,6 @@ static int b43_get_stats(struct ieee8021
return 0;
}
-static int b43_dev_reset(struct ieee80211_hw *hw)
-{
- struct b43_wl *wl = hw_to_b43_wl(hw);
- struct b43_wldev *dev = wl->current_dev;
- unsigned long flags;
-
- if (!dev)
- return -ENODEV;
- spin_lock_irqsave(&wl->irq_lock, flags);
- b43_controller_restart(dev, "Reset by ieee80211 subsystem");
- spin_unlock_irqrestore(&wl->irq_lock, flags);
-
- return 0;
-}
-
static const char *phymode_to_string(unsigned int phymode)
{
switch (phymode) {
@@ -3498,7 +3483,6 @@ static const struct ieee80211_ops b43_hw
.conf_tx = b43_conf_tx,
.add_interface = b43_add_interface,
.remove_interface = b43_remove_interface,
- .reset = b43_dev_reset,
.config = b43_dev_config,
.config_interface = b43_config_interface,
.change_filter_flags = b43_change_filter_flags,
--- wireless-dev.orig/drivers/net/wireless/rt2400pci.c 2007-08-15 01:03:31.450200043 +0200
+++ wireless-dev/drivers/net/wireless/rt2400pci.c 2007-08-15 01:04:34.190200043 +0200
@@ -1589,7 +1589,6 @@ static int rt2400pci_tx_last_beacon(stru
static const struct ieee80211_ops rt2400pci_mac80211_ops = {
.tx = rt2x00mac_tx,
- .reset = rt2x00mac_reset,
.add_interface = rt2x00mac_add_interface,
.remove_interface = rt2x00mac_remove_interface,
.config = rt2x00mac_config,
--- wireless-dev.orig/drivers/net/wireless/rt2500pci.c 2007-08-15 01:03:31.780200043 +0200
+++ wireless-dev/drivers/net/wireless/rt2500pci.c 2007-08-15 01:04:52.770200043 +0200
@@ -1824,7 +1824,6 @@ static int rt2500pci_tx_last_beacon(stru
static const struct ieee80211_ops rt2500pci_mac80211_ops = {
.tx = rt2x00mac_tx,
- .reset = rt2x00mac_reset,
.add_interface = rt2x00mac_add_interface,
.remove_interface = rt2x00mac_remove_interface,
.config = rt2x00mac_config,
--- wireless-dev.orig/drivers/net/wireless/rt2500usb.c 2007-08-15 01:03:31.890200043 +0200
+++ wireless-dev/drivers/net/wireless/rt2500usb.c 2007-08-15 01:04:57.060200043 +0200
@@ -1512,7 +1512,6 @@ static int rt2500usb_probe_hw(struct rt2
*/
static const struct ieee80211_ops rt2500usb_mac80211_ops = {
.tx = rt2x00mac_tx,
- .reset = rt2x00mac_reset,
.add_interface = rt2x00mac_add_interface,
.remove_interface = rt2x00mac_remove_interface,
.config = rt2x00mac_config,
--- wireless-dev.orig/drivers/net/wireless/rt2x00mac.c 2007-08-15 01:06:13.540200043 +0200
+++ wireless-dev/drivers/net/wireless/rt2x00mac.c 2007-08-15 01:06:19.730200043 +0200
@@ -166,7 +166,6 @@ exit:
return retval;
}
-EXPORT_SYMBOL_GPL(rt2x00mac_reset);
int rt2x00mac_add_interface(struct ieee80211_hw *hw,
struct ieee80211_if_init_conf *conf)
--- wireless-dev.orig/drivers/net/wireless/rt61pci.c 2007-08-15 01:03:31.060200043 +0200
+++ wireless-dev/drivers/net/wireless/rt61pci.c 2007-08-15 01:04:17.350200043 +0200
@@ -2340,7 +2340,6 @@ static void rt61pci_reset_tsf(struct iee
static const struct ieee80211_ops rt61pci_mac80211_ops = {
.tx = rt2x00mac_tx,
- .reset = rt2x00mac_reset,
.add_interface = rt2x00mac_add_interface,
.remove_interface = rt2x00mac_remove_interface,
.config = rt2x00mac_config,
--- wireless-dev.orig/drivers/net/wireless/rt73usb.c 2007-08-15 01:03:30.950200043 +0200
+++ wireless-dev/drivers/net/wireless/rt73usb.c 2007-08-15 01:04:08.010200043 +0200
@@ -1813,7 +1813,6 @@ static void rt73usb_reset_tsf(struct iee
static const struct ieee80211_ops rt73usb_mac80211_ops = {
.tx = rt2x00mac_tx,
- .reset = rt2x00mac_reset,
.add_interface = rt2x00mac_add_interface,
.remove_interface = rt2x00mac_remove_interface,
.config = rt2x00mac_config,
On Tuesday 14 August 2007 16:13, Johannes Berg wrote:
> Somebody (I think it was Uli) recently complained about this callback so
> when I just remembered that I went and looked where it is used. Guess
> what: nowhere. I think it was at one point used in the tx timeout
> handler but that should probably do something else anyway.
>
I removed the code that used it since it couldn't possibly work right and most
drivers end up just doing a stop and open on their interface to implement
reset anyway.
-Michael Wu