I received Ralink module from IEI corp, today.
I did test.
iwconfig setting
--------------------------------------------------
[root@localhost compat-wireless-2.6-20080311]# iwconfig wlan3 essid kkk
mode ad-hoc channel 161 rate 18Mb
[root@localhost compat-wireless-2.6-20080311]# iwconfig=20
lo no wireless extensions.
eth0 no wireless extensions.
virbr0 no wireless extensions.
wmaster0 no wireless extensions.
wlan3 IEEE 802.11a ESSID:"kkk" =20
Mode:Ad-Hoc Frequency:5.805 GHz Cell: Not-Associated =20
Tx-Power=3D17 dBm =20
Retry min limit:7 RTS thr:off Fragment thr=3D2346 B =20
Encryption key:off
Link Quality:0 Signal level:0 Noise level:0
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
[root@localhost compat-wireless-2.6-20080311]# ifconfig wlan3
100.100.100.100
SIOCSIFFLAGS: not support command
--------------------------------------------------
when setting 'ifconfig wlan3 100.100.100.100', dmesg is like follwings:
--------------------------------------------------
phy0 -> rt61pci_init_bbp: Debug - Start initialization from EEPROM...
phy0 -> rt61pci_init_bbp: Debug - ...End initialization from EEPROM.
phy0 -> rt2x00mac_add_interface: Error - rt2x00 does not support Adhoc =
or
Master mode<3>phy0 -> rt61pci_mcu_request: Error - mcu request error.
Request 0x50 failed for token 0xff.
--------------------------------------------------
--
--
Have a Wonderful Day~~!!
=B1=E8=BF=B5=C8=AF (James-Youngwhan Kim)
[email protected]
[email protected]
+82-42-863-0340
+82-10-6753-0987
HTVC 3106 KAIST, 373-1 Guseong-dong, Yuseong-gu,
Daejon, Republic of Korea
305-701
> iwconfig wlan3 essid kkk mode ad-hoc channel 161 rate 18Mb
^^^^^^^^^^^
> when setting 'ifconfig wlan3 100.100.100.100', dmesg is like follwings:
> phy0 -> rt2x00mac_add_interface: Error - rt2x00 does not support Adhoc or
> Master mode
Can hardly be more explicit, can it?
johannes