ANI was not being initialized correctly for all HW variants.
This patch fixes it.
Signed-off-by: Sujith <[email protected]>
---
drivers/net/wireless/ath9k/hw.c | 13 +++----------
1 files changed, 3 insertions(+), 10 deletions(-)
diff --git a/drivers/net/wireless/ath9k/hw.c b/drivers/net/wireless/ath9k/hw.c
index c10b33b..ea550cc 100644
--- a/drivers/net/wireless/ath9k/hw.c
+++ b/drivers/net/wireless/ath9k/hw.c
@@ -662,16 +662,9 @@ static struct ath_hw *ath9k_hw_do_attach(u16 devid, struct ath_softc *sc,
ah->supp_cals = ADC_GAIN_CAL | ADC_DC_CAL | IQ_MISMATCH_CAL;
}
- if (AR_SREV_9160(ah)) {
- ah->config.enable_ani = 1;
- ah->ani_function = (ATH9K_ANI_SPUR_IMMUNITY_LEVEL |
- ATH9K_ANI_FIRSTEP_LEVEL);
- } else {
- ah->ani_function = ATH9K_ANI_ALL;
- if (AR_SREV_9280_10_OR_LATER(ah)) {
- ah->ani_function &= ~ATH9K_ANI_NOISE_IMMUNITY_LEVEL;
- }
- }
+ ah->ani_function = ATH9K_ANI_ALL;
+ if (AR_SREV_9280_10_OR_LATER(ah))
+ ah->ani_function &= ~ATH9K_ANI_NOISE_IMMUNITY_LEVEL;
DPRINTF(sc, ATH_DBG_RESET,
"This Mac Chip Rev 0x%02x.%x is \n",
--
1.6.1