This patch fixes a bug in ath9k_hw_init_cal() where the wrong
calibration was being done for non-AR9285 chipsets.
Also add a few helpful comments.
Cc: [email protected]
Signed-off-by: Sujith <[email protected]>
---
drivers/net/wireless/ath/ath9k/calib.c | 61 +++++++++++--------------------
1 files changed, 22 insertions(+), 39 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/calib.c b/drivers/net/wireless/ath/ath9k/calib.c
index 67375ad..08f6902 100644
--- a/drivers/net/wireless/ath/ath9k/calib.c
+++ b/drivers/net/wireless/ath/ath9k/calib.c
@@ -918,83 +918,66 @@ static bool ar9285_clc(struct ath_hw *ah, struct ath9k_channel *chan)
return true;
}
-bool ath9k_hw_init_cal(struct ath_hw *ah,
- struct ath9k_channel *chan)
+bool ath9k_hw_init_cal(struct ath_hw *ah, struct ath9k_channel *chan)
{
if (AR_SREV_9285(ah) && AR_SREV_9285_12_OR_LATER(ah)) {
if (!ar9285_clc(ah, chan))
return false;
- } else if (AR_SREV_9280_10_OR_LATER(ah)) {
- REG_CLR_BIT(ah, AR_PHY_ADC_CTL, AR_PHY_ADC_CTL_OFF_PWDADC);
- REG_SET_BIT(ah, AR_PHY_AGC_CONTROL, AR_PHY_AGC_CONTROL_FLTR_CAL);
- REG_CLR_BIT(ah, AR_PHY_CL_CAL_CTL, AR_PHY_CL_CAL_ENABLE);
+ } else {
+ if (AR_SREV_9280_10_OR_LATER(ah)) {
+ REG_CLR_BIT(ah, AR_PHY_ADC_CTL, AR_PHY_ADC_CTL_OFF_PWDADC);
+ REG_SET_BIT(ah, AR_PHY_AGC_CONTROL, AR_PHY_AGC_CONTROL_FLTR_CAL);
+ }
- /* Kick off the cal */
+ /* Calibrate the AGC */
REG_WRITE(ah, AR_PHY_AGC_CONTROL,
- REG_READ(ah, AR_PHY_AGC_CONTROL) |
- AR_PHY_AGC_CONTROL_CAL);
+ REG_READ(ah, AR_PHY_AGC_CONTROL) |
+ AR_PHY_AGC_CONTROL_CAL);
- if (!ath9k_hw_wait(ah, AR_PHY_AGC_CONTROL,
- AR_PHY_AGC_CONTROL_CAL, 0,
- AH_WAIT_TIMEOUT)) {
+ /* Poll for offset calibration complete */
+ if (!ath9k_hw_wait(ah, AR_PHY_AGC_CONTROL, AR_PHY_AGC_CONTROL_CAL,
+ 0, AH_WAIT_TIMEOUT)) {
DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
"offset calibration failed to complete in 1ms; "
"noisy environment?\n");
return false;
}
- REG_CLR_BIT(ah, AR_PHY_ADC_CTL, AR_PHY_ADC_CTL_OFF_PWDADC);
- REG_SET_BIT(ah, AR_PHY_AGC_CONTROL, AR_PHY_AGC_CONTROL_FLTR_CAL);
- REG_SET_BIT(ah, AR_PHY_CL_CAL_CTL, AR_PHY_CL_CAL_ENABLE);
- }
-
- /* Calibrate the AGC */
- REG_WRITE(ah, AR_PHY_AGC_CONTROL,
- REG_READ(ah, AR_PHY_AGC_CONTROL) |
- AR_PHY_AGC_CONTROL_CAL);
-
- if (!ath9k_hw_wait(ah, AR_PHY_AGC_CONTROL, AR_PHY_AGC_CONTROL_CAL,
- 0, AH_WAIT_TIMEOUT)) {
- DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
- "offset calibration failed to complete in 1ms; "
- "noisy environment?\n");
- return false;
- }
-
- if (AR_SREV_9280_10_OR_LATER(ah)) {
- REG_SET_BIT(ah, AR_PHY_ADC_CTL, AR_PHY_ADC_CTL_OFF_PWDADC);
- REG_CLR_BIT(ah, AR_PHY_AGC_CONTROL, AR_PHY_AGC_CONTROL_FLTR_CAL);
+ if (AR_SREV_9280_10_OR_LATER(ah)) {
+ REG_SET_BIT(ah, AR_PHY_ADC_CTL, AR_PHY_ADC_CTL_OFF_PWDADC);
+ REG_CLR_BIT(ah, AR_PHY_AGC_CONTROL, AR_PHY_AGC_CONTROL_FLTR_CAL);
+ }
}
/* Do PA Calibration */
if (AR_SREV_9285(ah) && AR_SREV_9285_11_OR_LATER(ah))
ath9k_hw_9285_pa_cal(ah);
- /* Do NF Calibration */
+ /* Do NF Calibration after DC offset and other calibrations */
REG_WRITE(ah, AR_PHY_AGC_CONTROL,
- REG_READ(ah, AR_PHY_AGC_CONTROL) |
- AR_PHY_AGC_CONTROL_NF);
+ REG_READ(ah, AR_PHY_AGC_CONTROL) | AR_PHY_AGC_CONTROL_NF);
ah->cal_list = ah->cal_list_last = ah->cal_list_curr = NULL;
+ /* Enable IQ, ADC Gain and ADC DC offset CALs */
if (AR_SREV_9100(ah) || AR_SREV_9160_10_OR_LATER(ah)) {
if (ath9k_hw_iscal_supported(ah, ADC_GAIN_CAL)) {
INIT_CAL(&ah->adcgain_caldata);
INSERT_CAL(ah, &ah->adcgain_caldata);
DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
- "enabling ADC Gain Calibration.\n");
+ "enabling ADC Gain Calibration.\n");
}
if (ath9k_hw_iscal_supported(ah, ADC_DC_CAL)) {
INIT_CAL(&ah->adcdc_caldata);
INSERT_CAL(ah, &ah->adcdc_caldata);
DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
- "enabling ADC DC Calibration.\n");
+ "enabling ADC DC Calibration.\n");
}
if (ath9k_hw_iscal_supported(ah, IQ_MISMATCH_CAL)) {
INIT_CAL(&ah->iq_caldata);
INSERT_CAL(ah, &ah->iq_caldata);
DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
- "enabling IQ Calibration.\n");
+ "enabling IQ Calibration.\n");
}
ah->cal_list_curr = ah->cal_list;
--
1.6.2.2