2009-09-17 03:55:20

by Sujith

[permalink] [raw]
Subject: [PATCH 03/12] ath9k: Restore TSF after RESET

For chips requiring RTC reset, TSF has to be restored
after power on reset.

Signed-off-by: Sujith <[email protected]>
---
drivers/net/wireless/ath/ath9k/hw.c | 9 +++++++++
1 files changed, 9 insertions(+), 0 deletions(-)

diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index 82a2440..af5bb50 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -2338,6 +2338,7 @@ int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan,
struct ath9k_channel *curchan = ah->curchan;
u32 saveDefAntenna;
u32 macStaId1;
+ u64 tsf = 0;
int i, rx_chainmask, r;

ah->extprotspacing = sc->ht_extprotspacing;
@@ -2372,6 +2373,10 @@ int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan,

macStaId1 = REG_READ(ah, AR_STA_ID1) & AR_STA_ID1_BASE_RATE_11B;

+ /* For chips on which RTC reset is done, save TSF before it gets cleared */
+ if (AR_SREV_9280(ah) && ah->eep_ops->get_eeprom(ah, EEP_OL_PWRCTRL))
+ tsf = ath9k_hw_gettsf64(ah);
+
saveLedState = REG_READ(ah, AR_CFG_LED) &
(AR_CFG_LED_ASSOC_CTL | AR_CFG_LED_MODE_SEL |
AR_CFG_LED_BLINK_THRESH_SEL | AR_CFG_LED_BLINK_SLOW);
@@ -2398,6 +2403,10 @@ int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan,
udelay(50);
}

+ /* Restore TSF */
+ if (tsf && AR_SREV_9280(ah) && ah->eep_ops->get_eeprom(ah, EEP_OL_PWRCTRL))
+ ath9k_hw_settsf64(ah, tsf);
+
if (AR_SREV_9280_10_OR_LATER(ah))
REG_SET_BIT(ah, AR_GPIO_INPUT_EN_VAL, AR_GPIO_JTAG_DISABLE);

--
1.6.4.3