This patch fixes 2 issues in RFKILL:
* Calling wiphy_rfkill_stop_polling() in ath9k_stop
would mean that the driver cannot report HW status
when the radio is re-enabled. Move this to ath_detach().
* Calling ath_radio_{enable/disable} without checking the current
state results in ath_radio_enable() being called repeatedly
for every invocation of rfkill_poll(). This is not needed
in any case since wiphy_rfkill_set_hw_state() would call
->stop() if the radio has been disabled.
Signed-off-by: Sujith <[email protected]>
Signed-off-by: Vasanthakumar Thiagarajan <[email protected]>
---
drivers/net/wireless/ath/ath9k/main.c | 8 +-------
1 files changed, 1 insertions(+), 7 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index 0d6bbb8..2278dcb 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -1299,11 +1299,6 @@ static void ath9k_rfkill_poll_state(struct ieee80211_hw *hw)
bool blocked = !!ath_is_rfkill_set(sc);
wiphy_rfkill_set_hw_state(hw->wiphy, blocked);
-
- if (blocked)
- ath_radio_disable(sc);
- else
- ath_radio_enable(sc);
}
static void ath_start_rfkill_poll(struct ath_softc *sc)
@@ -1337,6 +1332,7 @@ void ath_detach(struct ath_softc *sc)
dev_dbg(sc->dev, "Detach ATH hw\n");
ath_deinit_leds(sc);
+ wiphy_rfkill_stop_polling(sc->hw->wiphy);
for (i = 0; i < sc->num_sec_wiphy; i++) {
struct ath_wiphy *aphy = sc->sec_wiphy[i];
@@ -2524,8 +2520,6 @@ static void ath9k_stop(struct ieee80211_hw *hw)
} else
sc->rx.rxlink = NULL;
- wiphy_rfkill_stop_polling(sc->hw->wiphy);
-
/* disable HAL and put h/w to sleep */
ath9k_hw_disable(ah);
ath9k_hw_configpcipowersave(ah, 1, 1);
--
1.6.4.4