The time between loading the helper image and starting to upload the
main firmware image should be at least 5 ms or so. We were doing an
msleep(1) before, and 1 ms appears to not be enough in almost all
cases, but building with HZ=100 has always masked this so far. Bumping
the msleep argument to 5 fixes firmware loading e.g. when HZ=1000.
Some firmware images need more than 200ms to initialize. Bump the
ready code timeout to 500ms to accommodate for this.
Signed-off-by: Lennert Buytenhek <[email protected]>
---
drivers/net/wireless/mwl8k.c | 5 ++---
1 files changed, 2 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c
index 8f7546f..b3eba35 100644
--- a/drivers/net/wireless/mwl8k.c
+++ b/drivers/net/wireless/mwl8k.c
@@ -571,7 +571,7 @@ static int mwl8k_load_firmware(struct ieee80211_hw *hw)
"helper image\n", pci_name(priv->pdev));
return rc;
}
- msleep(1);
+ msleep(5);
rc = mwl8k_feed_fw_image(priv, fw->data, fw->size);
} else {
@@ -588,9 +588,8 @@ static int mwl8k_load_firmware(struct ieee80211_hw *hw)
iowrite32(MWL8K_MODE_AP, priv->regs + MWL8K_HIU_GEN_PTR);
else
iowrite32(MWL8K_MODE_STA, priv->regs + MWL8K_HIU_GEN_PTR);
- msleep(1);
- loops = 200000;
+ loops = 500000;
do {
u32 ready_code;
--
1.5.6.4