2010-07-02 18:24:46

by Jaroslav Fojtik

[permalink] [raw]
Subject: Re: Enabling channels 12,13

Dear Paul Fertser,

thank you for a hint.

But unfortunatelly this patch (attached) does not work for me.
May be for multiple devices? Who knows.

Band 1:
Frequencies:
* 2412 MHz [1] (20.0 dBm)
* 2417 MHz [2] (20.0 dBm)
* 2422 MHz [3] (20.0 dBm)
* 2427 MHz [4] (20.0 dBm)
* 2432 MHz [5] (20.0 dBm)
* 2437 MHz [6] (20.0 dBm)
* 2442 MHz [7] (20.0 dBm)
* 2447 MHz [8] (20.0 dBm)
* 2452 MHz [9] (20.0 dBm)
* 2457 MHz [10] (20.0 dBm)
* 2462 MHz [11] (20.0 dBm)
* 2467 MHz [12] (disabled)
* 2472 MHz [13] (disabled)
* 2484 MHz [14] (disabled)



[ 4.464183] ath5k 0000:02:08.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 4.464328] ath5k 0000:02:08.0: registered as 'phy0'
[ 5.059773] ath5k phy0: DANGER! You're overriding EEPROM-defined regulatory domain.
[ 5.059837] ath5k phy0: Your card was not certified to operate on the domain you choosed.
[ 5.059902] ath5k phy0: This might result in a violation of your local regulatory rules.
--
[ 5.122197] ath5k 0000:02:0a.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 5.122338] ath5k 0000:02:0a.0: registered as 'phy1'
[ 5.587528] ath5k phy1: DANGER! You're overriding EEPROM-defined regulatory domain.
[ 5.587593] ath5k phy1: Your card was not certified to operate on the domain you choosed.
[ 5.588358] ath5k phy1: This might result in a violation of your local regulatory rules.

> Please see this for reference:
> http://forum.aircrack-ng.org/index.php?topic=6822.15
>
> You can also try "pentoo" gentoo overlay.

regards
Jara


>
> HTH
> --
> Be free, use free (http://www.gnu.org/philosophy/free-sw.html) software!
> mailto:[email protected]



Attachments:
ath5k_regdomain_override.patch (1.45 kB)