Survey: Mark frequency in use according to NL80211_SURVEY_INFO_IN_USE.
This patch comes from OpenWRT. Original author: Felix Fietkau
Cc: Felix Fietkau <[email protected]>
Signed-off-by: Bruno Randolf <[email protected]>
---
survey.c | 5 +++--
1 files changed, 3 insertions(+), 2 deletions(-)
diff --git a/survey.c b/survey.c
index f9f2508..83c54b3 100644
--- a/survey.c
+++ b/survey.c
@@ -44,8 +44,9 @@ static int print_survey_handler(struct nl_msg *msg, void *arg)
}
if (sinfo[NL80211_SURVEY_INFO_FREQUENCY])
- printf("\tfrequency:\t%u MHz\n",
- nla_get_u32(sinfo[NL80211_SURVEY_INFO_FREQUENCY]));
+ printf("\tfrequency:\t%u MHz%s\n",
+ nla_get_u32(sinfo[NL80211_SURVEY_INFO_FREQUENCY]),
+ sinfo[NL80211_SURVEY_INFO_IN_USE] ? " [in use]" : "");
if (sinfo[NL80211_SURVEY_INFO_NOISE])
printf("\tnoise:\t\t%d dBm\n",
(int8_t)nla_get_u8(sinfo[NL80211_SURVEY_INFO_NOISE]));
Add multicast rates to IBSS join command.
This patch comes from OpenWRT. Original author: Felix Fietkau.
Cc: Felix Fietkau <[email protected]>
Signed-off-by: Bruno Randolf <[email protected]>
---
ibss.c | 21 ++++++++++++++++++---
1 files changed, 18 insertions(+), 3 deletions(-)
diff --git a/ibss.c b/ibss.c
index 84ea7f2..ca8a4ec 100644
--- a/ibss.c
+++ b/ibss.c
@@ -95,6 +95,20 @@ static int join_ibss(struct nl80211_state *state,
argc--;
}
+ /* multicast rate */
+ if (argc > 1 && strcmp(argv[0], "mcast-rate") == 0) {
+ argv++;
+ argc--;
+
+ rate = strtod(argv[0], &end);
+ if (*end != '\0')
+ return 1;
+
+ NLA_PUT_U32(msg, NL80211_ATTR_MCAST_RATE, (int) rate * 10);
+ argv++;
+ argc--;
+ }
+
if (!argc)
return 0;
@@ -120,12 +134,13 @@ COMMAND(ibss, leave, NULL,
NL80211_CMD_LEAVE_IBSS, 0, CIB_NETDEV, leave_ibss,
"Leave the current IBSS cell.");
COMMAND(ibss, join,
- "<SSID> <freq in MHz> [fixed-freq] [<fixed bssid>] [beacon-interval "
- "<TU>] [basic-rates <rate in Mbps,rate2,...>] [key d:0:abcde]",
+ "<SSID> <freq in MHz> [fixed-freq] [<fixed bssid>] [beacon-interval <TU>]"
+ " [basic-rates <rate in Mbps,rate2,...>] [mcast-rate <rate in Mbps>] "
+ "[key d:0:abcde]",
NL80211_CMD_JOIN_IBSS, 0, CIB_NETDEV, join_ibss,
"Join the IBSS cell with the given SSID, if it doesn't exist create\n"
"it on the given frequency. When fixed frequency is requested, don't\n"
"join/create a cell on a different frequency. When a fixed BSSID is\n"
"requested use that BSSID and do not adopt another cell's BSSID even\n"
"if it has higher TSF and the same SSID. If an IBSS is created, create\n"
- "it with the specified basic-rates and beacon-interval (in TU).");
+ "it with the specified basic-rates, multicast-rate and beacon-interval.");
Print station signal average in station dump.
Signed-off-by: Bruno Randolf <[email protected]>
---
station.c | 3 +++
1 files changed, 3 insertions(+), 0 deletions(-)
diff --git a/station.c b/station.c
index be2301f..6581d50 100644
--- a/station.c
+++ b/station.c
@@ -107,6 +107,9 @@ static int print_sta_handler(struct nl_msg *msg, void *arg)
if (sinfo[NL80211_STA_INFO_SIGNAL])
printf("\n\tsignal: \t%d dBm",
(int8_t)nla_get_u8(sinfo[NL80211_STA_INFO_SIGNAL]));
+ if (sinfo[NL80211_STA_INFO_SIGNAL_AVG])
+ printf("\n\tsignal avg:\t%d dBm",
+ (int8_t)nla_get_u8(sinfo[NL80211_STA_INFO_SIGNAL_AVG]));
if (sinfo[NL80211_STA_INFO_TX_BITRATE]) {
if (nla_parse_nested(rinfo, NL80211_RATE_INFO_MAX,
Print channel busy time in survey dump.
This patch comes from OpenWRT. Original author: Felix Fietkau.
Fixed up for unsigned values.
Cc: Felix Fietkau <[email protected]>
Signed-off-by: Bruno Randolf <[email protected]>
---
survey.c | 19 +++++++++++++++++--
1 files changed, 17 insertions(+), 2 deletions(-)
diff --git a/survey.c b/survey.c
index 83c54b3..e71d21b 100644
--- a/survey.c
+++ b/survey.c
@@ -44,12 +44,27 @@ static int print_survey_handler(struct nl_msg *msg, void *arg)
}
if (sinfo[NL80211_SURVEY_INFO_FREQUENCY])
- printf("\tfrequency:\t%u MHz%s\n",
+ printf("\tfrequency:\t\t\t%u MHz%s\n",
nla_get_u32(sinfo[NL80211_SURVEY_INFO_FREQUENCY]),
sinfo[NL80211_SURVEY_INFO_IN_USE] ? " [in use]" : "");
if (sinfo[NL80211_SURVEY_INFO_NOISE])
- printf("\tnoise:\t\t%d dBm\n",
+ printf("\tnoise:\t\t\t\t%d dBm\n",
(int8_t)nla_get_u8(sinfo[NL80211_SURVEY_INFO_NOISE]));
+ if (sinfo[NL80211_SURVEY_INFO_CHANNEL_TIME])
+ printf("\tchannel active time:\t\t%llu ms\n",
+ (uint64_t)nla_get_u64(sinfo[NL80211_SURVEY_INFO_CHANNEL_TIME]));
+ if (sinfo[NL80211_SURVEY_INFO_CHANNEL_TIME_BUSY])
+ printf("\tchannel busy time:\t\t%llu ms\n",
+ (uint64_t)nla_get_u64(sinfo[NL80211_SURVEY_INFO_CHANNEL_TIME_BUSY]));
+ if (sinfo[NL80211_SURVEY_INFO_CHANNEL_TIME_EXT_BUSY])
+ printf("\textension channel busy time:\t%llu ms\n",
+ (uint64_t)nla_get_u64(sinfo[NL80211_SURVEY_INFO_CHANNEL_TIME_EXT_BUSY]));
+ if (sinfo[NL80211_SURVEY_INFO_CHANNEL_TIME_RX])
+ printf("\tchannel receive time:\t\t%llu ms\n",
+ (uint64_t)nla_get_u64(sinfo[NL80211_SURVEY_INFO_CHANNEL_TIME_RX]));
+ if (sinfo[NL80211_SURVEY_INFO_CHANNEL_TIME_TX])
+ printf("\tchannel transmit time:\t\t%llu ms\n",
+ (uint64_t)nla_get_u64(sinfo[NL80211_SURVEY_INFO_CHANNEL_TIME_TX]));
return NL_SKIP;
}
On Friday 07 January 2011 20:00:21 Johannes Berg wrote:
> On Fri, 2011-01-07 at 15:00 +0900, Bruno Randolf wrote:
> > Survey: Mark frequency in use according to NL80211_SURVEY_INFO_IN_USE.
> >
> > This patch comes from OpenWRT. Original author: Felix Fietkau
>
> Can you please resend with From: so I can apply them with the proper
> author?
Allright. Will do that next Tuesday.
bruno
On Fri, 2011-01-07 at 15:00 +0900, Bruno Randolf wrote:
> Survey: Mark frequency in use according to NL80211_SURVEY_INFO_IN_USE.
>
> This patch comes from OpenWRT. Original author: Felix Fietkau
Can you please resend with From: so I can apply them with the proper
author?
johannes