From: Mohammed Shafi Shajakhan <[email protected]>
also remove an unused macro and a function declaration
Signed-off-by: Mohammed Shafi Shajakhan <[email protected]>
---
drivers/net/wireless/ath/ath9k/ar9003_phy.c | 2 +-
drivers/net/wireless/ath/ath9k/ath9k.h | 1 -
drivers/net/wireless/ath/ath9k/calib.h | 1 -
3 files changed, 1 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.c b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
index 2589b38..2b0bfb8 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
@@ -46,7 +46,7 @@ static const int m2ThreshExt_off = 127;
* @chan:
*
* This is the function to change channel on single-chip devices, that is
- * all devices after ar9280.
+ * for AR9300 family of chipsets.
*
* This function takes the channel value in MHz and sets
* hardware channel value. Assumes writes have been enabled to analog bus.
diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h
index b30e9fc..171ccf7 100644
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
@@ -679,7 +679,6 @@ void ath9k_deinit_device(struct ath_softc *sc);
void ath9k_set_hw_capab(struct ath_softc *sc, struct ieee80211_hw *hw);
void ath9k_reload_chainmask_settings(struct ath_softc *sc);
-void ath_radio_disable(struct ath_softc *sc, struct ieee80211_hw *hw);
bool ath9k_uses_beacons(int type);
#ifdef CONFIG_ATH9K_PCI
diff --git a/drivers/net/wireless/ath/ath9k/calib.h b/drivers/net/wireless/ath/ath9k/calib.h
index 05b9dbf..3b33996 100644
--- a/drivers/net/wireless/ath/ath9k/calib.h
+++ b/drivers/net/wireless/ath/ath9k/calib.h
@@ -19,7 +19,6 @@
#include "hw.h"
-#define AR_PHY_CCA_FILTERWINDOW_LENGTH_INIT 3
#define AR_PHY_CCA_FILTERWINDOW_LENGTH 5
#define NUM_NF_READINGS 6
--
1.7.0.4