Disable group keys programming when using IBSS RSN. Keys will be managed using
software. In this way IBSS RSN can correctly work.
Signed-off-by: Antonio Quartulli <[email protected]>
---
drivers/net/wireless/ath/ath5k/base.c | 3 +++
drivers/net/wireless/ath/ath5k/mac80211-ops.c | 8 ++++++++
2 files changed, 11 insertions(+), 0 deletions(-)
diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c
index 178a4dd..7ad9dea 100644
--- a/drivers/net/wireless/ath/ath5k/base.c
+++ b/drivers/net/wireless/ath/ath5k/base.c
@@ -2442,6 +2442,9 @@ ath5k_init_ah(struct ath5k_hw *ah, const struct ath_bus_ops *bus_ops)
BIT(NL80211_IFTYPE_ADHOC) |
BIT(NL80211_IFTYPE_MESH_POINT);
+ /* SW support for IBSS_RSN is provided by mac80211 */
+ hw->wiphy->flags |= WIPHY_FLAG_IBSS_RSN;
+
/* both antennas can be configured as RX or TX */
hw->wiphy->available_antennas_tx = 0x3;
hw->wiphy->available_antennas_rx = 0x3;
diff --git a/drivers/net/wireless/ath/ath5k/mac80211-ops.c b/drivers/net/wireless/ath/ath5k/mac80211-ops.c
index 6ed4c07..af4c7ec 100644
--- a/drivers/net/wireless/ath/ath5k/mac80211-ops.c
+++ b/drivers/net/wireless/ath/ath5k/mac80211-ops.c
@@ -483,6 +483,14 @@ ath5k_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
if (ath5k_modparam_nohwcrypt)
return -EOPNOTSUPP;
+ if (vif->type == NL80211_IFTYPE_ADHOC &&
+ (key->cipher == WLAN_CIPHER_SUITE_TKIP ||
+ key->cipher == WLAN_CIPHER_SUITE_CCMP) &&
+ !(key->flags & IEEE80211_KEY_FLAG_PAIRWISE)) {
+ /* don't program group keys when using IBSS_RSN */
+ return -EOPNOTSUPP;
+ }
+
switch (key->cipher) {
case WLAN_CIPHER_SUITE_WEP40:
case WLAN_CIPHER_SUITE_WEP104:
--
1.7.3.4