In case of changes in the supported rates set for a given station, it is now
possible to use this callback to update the current internal state of the
station in the htc driver.
Reported-by: Gui Iribarren <[email protected]>
Signed-off-by: Antonio Quartulli <[email protected]>
---
drivers/net/wireless/ath/ath9k/htc_drv_main.c | 29 +++++++++++++++++++++++++
1 file changed, 29 insertions(+)
diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_main.c b/drivers/net/wireless/ath/ath9k/htc_drv_main.c
index c785129..2658d0a 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_main.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_main.c
@@ -1331,6 +1331,34 @@ static int ath9k_htc_sta_remove(struct ieee80211_hw *hw,
return ret;
}
+static void ath9k_htc_sta_rc_update(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif,
+ struct ieee80211_sta *sta, u32 changed)
+{
+ struct ath9k_htc_priv *priv = hw->priv;
+ struct ath_common *common = ath9k_hw_common(priv->ah);
+ struct ath9k_htc_target_rate trate;
+
+ mutex_lock(&priv->mutex);
+ ath9k_htc_ps_wakeup(priv);
+
+ if (changed & IEEE80211_RC_SUPP_RATES_CHANGED) {
+ memset(&trate, 0, sizeof(struct ath9k_htc_target_rate));
+ ath9k_htc_setup_rate(priv, sta, &trate);
+ if (!ath9k_htc_send_rate_cmd(priv, &trate))
+ ath_dbg(common, CONFIG,
+ "Supported rates for sta: %pM updated, rate caps: 0x%X\n",
+ sta->addr, be32_to_cpu(trate.capflags));
+ else
+ ath_dbg(common, CONFIG,
+ "Unable to update supported rates for sta: %pM\n",
+ sta->addr);
+ }
+
+ ath9k_htc_ps_restore(priv);
+ mutex_unlock(&priv->mutex);
+}
+
static int ath9k_htc_conf_tx(struct ieee80211_hw *hw,
struct ieee80211_vif *vif, u16 queue,
const struct ieee80211_tx_queue_params *params)
@@ -1758,6 +1786,7 @@ struct ieee80211_ops ath9k_htc_ops = {
.sta_add = ath9k_htc_sta_add,
.sta_remove = ath9k_htc_sta_remove,
.conf_tx = ath9k_htc_conf_tx,
+ .sta_rc_update = ath9k_htc_sta_rc_update,
.bss_info_changed = ath9k_htc_bss_info_changed,
.set_key = ath9k_htc_set_key,
.get_tsf = ath9k_htc_get_tsf,
--
1.7.9.4
Antonio Quartulli wrote:
> In case of changes in the supported rates set for a given station, it is now
> possible to use this callback to update the current internal state of the
> station in the htc driver.
The driver changes are okay, there are now multiple calls to update_rate()
inside ath9k_htc, but we can clean that later.
Sujith