From: Sujith Manoharan <[email protected]>
TX IQ calibration is disabled by default for AR9462, this
is done using the initvals (reg 0xa644).
But, to compensate for this, the AR_PHY_RX_DELAY register
should be set to the max allowed value when performing
calibration.
Signed-off-by: Sujith Manoharan <[email protected]>
---
drivers/net/wireless/ath/ath9k/ar9003_calib.c | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_calib.c b/drivers/net/wireless/ath/ath9k/ar9003_calib.c
index 6988e1d..6001bc0 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_calib.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_calib.c
@@ -1019,6 +1019,7 @@ static bool ar9003_hw_init_cal(struct ath_hw *ah,
bool is_reusable = true, status = true;
bool run_rtt_cal = false, run_agc_cal, sep_iq_cal = false;
bool rtt = !!(ah->caps.hw_caps & ATH9K_HW_CAP_RTT);
+ u32 rx_delay = 0;
u32 agc_ctrl = 0, agc_supp_cals = AR_PHY_AGC_CONTROL_OFFSET_CAL |
AR_PHY_AGC_CONTROL_FLTR_CAL |
AR_PHY_AGC_CONTROL_PKDET_CAL;
@@ -1099,6 +1100,15 @@ skip_tx_iqcal:
REG_WRITE(ah, AR_PHY_ACTIVE, AR_PHY_ACTIVE_EN);
}
+ if (REG_READ(ah, AR_PHY_CL_CAL_CTL) & AR_PHY_CL_CAL_ENABLE) {
+ rx_delay = REG_READ(ah, AR_PHY_RX_DELAY);
+ /* Disable BB_active */
+ REG_WRITE(ah, AR_PHY_ACTIVE, AR_PHY_ACTIVE_DIS);
+ udelay(5);
+ REG_WRITE(ah, AR_PHY_RX_DELAY, AR_PHY_RX_DELAY_DELAY);
+ REG_WRITE(ah, AR_PHY_ACTIVE, AR_PHY_ACTIVE_EN);
+ }
+
if (run_agc_cal || !(ah->ah_flags & AH_FASTCC)) {
/* Calibrate the AGC */
REG_WRITE(ah, AR_PHY_AGC_CONTROL,
@@ -1113,6 +1123,11 @@ skip_tx_iqcal:
ar9003_hw_do_manual_peak_cal(ah, chan);
}
+ if (REG_READ(ah, AR_PHY_CL_CAL_CTL) & AR_PHY_CL_CAL_ENABLE) {
+ REG_WRITE(ah, AR_PHY_RX_DELAY, rx_delay);
+ udelay(5);
+ }
+
if (ath9k_hw_mci_is_enabled(ah) && IS_CHAN_2GHZ(chan) && run_agc_cal)
ar9003_mci_init_cal_done(ah);
--
1.8.4
From: Sujith Manoharan <[email protected]>
Beacon transmission would get stuck if the NAV is
an invalid value for some reason. Check and correct
the NAV value in the HW when this happens.
Signed-off-by: Sujith Manoharan <[email protected]>
---
drivers/net/wireless/ath/ath9k/beacon.c | 2 ++
drivers/net/wireless/ath/ath9k/hw.c | 13 +++++++++++++
drivers/net/wireless/ath/ath9k/hw.h | 1 +
3 files changed, 16 insertions(+)
diff --git a/drivers/net/wireless/ath/ath9k/beacon.c b/drivers/net/wireless/ath/ath9k/beacon.c
index b5c16b3a..17be353 100644
--- a/drivers/net/wireless/ath/ath9k/beacon.c
+++ b/drivers/net/wireless/ath/ath9k/beacon.c
@@ -334,6 +334,8 @@ void ath9k_beacon_tasklet(unsigned long data)
if (ath9k_hw_numtxpending(ah, sc->beacon.beaconq) != 0) {
sc->beacon.bmisscnt++;
+ ath9k_hw_check_nav(ah);
+
if (!ath9k_hw_check_alive(ah))
ieee80211_queue_work(sc->hw, &sc->hw_check_work);
diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index 260e0c6..7d6e35d 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -1656,6 +1656,19 @@ hang_check_iter:
return true;
}
+void ath9k_hw_check_nav(struct ath_hw *ah)
+{
+ struct ath_common *common = ath9k_hw_common(ah);
+ u32 val;
+
+ val = REG_READ(ah, 0x8084);
+ if (val != 0xdeadbeef && val > 0x7fff) {
+ ath_dbg(common, BSTUCK, "Abnormal NAV: 0x%x\n", val);
+ REG_WRITE(ah, 0x8084, 0);
+ }
+}
+EXPORT_SYMBOL(ath9k_hw_check_nav);
+
bool ath9k_hw_check_alive(struct ath_hw *ah)
{
int count = 50;
diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h
index 88f67c3..8e1c675 100644
--- a/drivers/net/wireless/ath/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
@@ -1031,6 +1031,7 @@ void ath9k_hw_set11nmac2040(struct ath_hw *ah);
void ath9k_hw_beaconinit(struct ath_hw *ah, u32 next_beacon, u32 beacon_period);
void ath9k_hw_set_sta_beacon_timers(struct ath_hw *ah,
const struct ath9k_beacon_state *bs);
+void ath9k_hw_check_nav(struct ath_hw *ah);
bool ath9k_hw_check_alive(struct ath_hw *ah);
bool ath9k_hw_setpower(struct ath_hw *ah, enum ath9k_power_mode mode);
--
1.8.4
Kalle Valo wrote:
> Sujith Manoharan <[email protected]> writes:
>
> > [1] : http://msujith.org/ath9k/cfp/Malformed-CF-Param.png
>
> Not that it matters anything, but tshark most likely would have given
> you ASCII output of that :)
Unfortunately, I don't have the actual trace, just the pic. I got this
from a Field Engineer.
Sujith
From: Sujith Manoharan <[email protected]>
Beacon transmission would get stuck if the NAV is
an invalid value for some reason. Check and correct
the NAV value in the HW when this happens.
Signed-off-by: Sujith Manoharan <[email protected]>
---
v2 - Use AR_NAV macro instead of the register address.
drivers/net/wireless/ath/ath9k/beacon.c | 2 ++
drivers/net/wireless/ath/ath9k/hw.c | 13 +++++++++++++
drivers/net/wireless/ath/ath9k/hw.h | 1 +
3 files changed, 16 insertions(+)
diff --git a/drivers/net/wireless/ath/ath9k/beacon.c b/drivers/net/wireless/ath/ath9k/beacon.c
index b5c16b3a..17be353 100644
--- a/drivers/net/wireless/ath/ath9k/beacon.c
+++ b/drivers/net/wireless/ath/ath9k/beacon.c
@@ -334,6 +334,8 @@ void ath9k_beacon_tasklet(unsigned long data)
if (ath9k_hw_numtxpending(ah, sc->beacon.beaconq) != 0) {
sc->beacon.bmisscnt++;
+ ath9k_hw_check_nav(ah);
+
if (!ath9k_hw_check_alive(ah))
ieee80211_queue_work(sc->hw, &sc->hw_check_work);
diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index 260e0c6..11ed897 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -1656,6 +1656,19 @@ hang_check_iter:
return true;
}
+void ath9k_hw_check_nav(struct ath_hw *ah)
+{
+ struct ath_common *common = ath9k_hw_common(ah);
+ u32 val;
+
+ val = REG_READ(ah, AR_NAV);
+ if (val != 0xdeadbeef && val > 0x7fff) {
+ ath_dbg(common, BSTUCK, "Abnormal NAV: 0x%x\n", val);
+ REG_WRITE(ah, AR_NAV, 0);
+ }
+}
+EXPORT_SYMBOL(ath9k_hw_check_nav);
+
bool ath9k_hw_check_alive(struct ath_hw *ah)
{
int count = 50;
diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h
index 88f67c3..8e1c675 100644
--- a/drivers/net/wireless/ath/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
@@ -1031,6 +1031,7 @@ void ath9k_hw_set11nmac2040(struct ath_hw *ah);
void ath9k_hw_beaconinit(struct ath_hw *ah, u32 next_beacon, u32 beacon_period);
void ath9k_hw_set_sta_beacon_timers(struct ath_hw *ah,
const struct ath9k_beacon_state *bs);
+void ath9k_hw_check_nav(struct ath_hw *ah);
bool ath9k_hw_check_alive(struct ath_hw *ah);
bool ath9k_hw_setpower(struct ath_hw *ah, enum ath9k_power_mode mode);
--
1.8.4
From: Sujith Manoharan <[email protected]>
All QCA chips have the ability to parse the CF Parameter Set
IE in beacons. If the IE is malformed in the beacons from some
APs [1], the HW locks up. In AP mode, a beacon stuck would happen
and in client mode, a disconnection usually is the result.
To fix this issue, set the AR_PCU_MISC_MODE2_CFP_IGNORE to ignore
the CFP IE in beacons - this is applicable for all chips. For
AP mode, if this issue happens, the NAV is also corrupted and has
to be reset - this will be done in a subsequent patch.
[1] : http://msujith.org/ath9k/cfp/Malformed-CF-Param.png
Signed-off-by: Sujith Manoharan <[email protected]>
---
drivers/net/wireless/ath/ath9k/ar5008_phy.c | 2 ++
drivers/net/wireless/ath/ath9k/ar9003_phy.c | 6 ++++--
2 files changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/ar5008_phy.c b/drivers/net/wireless/ath/ath9k/ar5008_phy.c
index 0865647..9e4e2a6 100644
--- a/drivers/net/wireless/ath/ath9k/ar5008_phy.c
+++ b/drivers/net/wireless/ath/ath9k/ar5008_phy.c
@@ -626,6 +626,8 @@ static void ar5008_hw_override_ini(struct ath_hw *ah,
if (AR_SREV_9287_11_OR_LATER(ah))
val = val & (~AR_PCU_MISC_MODE2_HWWAR2);
+ val |= AR_PCU_MISC_MODE2_CFP_IGNORE;
+
REG_WRITE(ah, AR_PCU_MISC_MODE2, val);
}
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.c b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
index b8a279e..ec37213 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
@@ -627,8 +627,10 @@ static void ar9003_hw_override_ini(struct ath_hw *ah)
* MAC addr only will fail.
*/
val = REG_READ(ah, AR_PCU_MISC_MODE2) & (~AR_ADHOC_MCAST_KEYID_ENABLE);
- REG_WRITE(ah, AR_PCU_MISC_MODE2,
- val | AR_AGG_WEP_ENABLE_FIX | AR_AGG_WEP_ENABLE);
+ val |= AR_AGG_WEP_ENABLE_FIX |
+ AR_AGG_WEP_ENABLE |
+ AR_PCU_MISC_MODE2_CFP_IGNORE;
+ REG_WRITE(ah, AR_PCU_MISC_MODE2, val);
REG_SET_BIT(ah, AR_PHY_CCK_DETECT,
AR_PHY_CCK_DETECT_BB_ENABLE_ANT_FAST_DIV);
--
1.8.4
Sujith Manoharan <[email protected]> writes:
> [1] : http://msujith.org/ath9k/cfp/Malformed-CF-Param.png
Not that it matters anything, but tshark most likely would have given
you ASCII output of that :)
--
Kalle Valo
