Dave,
This is a pull request for a few early fixes for the 3.12 stream.
Alexey Khoroshilov corrects a use-after-free issue on rtl8187 found
by the Linux Driver Verification project.
Arend van Spriel provides a brcmfmac patch to fix a build issue
reported by Randy Dunlap.
Hauke Mehrtens offers a bcma fix to properly account for the storage
width of error code values before checking them.
Solomon Peachy brings a pair of cw1200 fixes to avoid hangs in that
driver with SPI devices. One avoids transfers in interrupt context,
the other fixes a locking issue.
Stanislaw Gruszka changes the initialization of the rt2800 driver to
avoid a freeze, addressing a bug in the Red Hat bugzilla.
Please let me know if there are problems!
Thanks,
John
---
The following changes since commit e7d33bb5ea82922e6ddcfc6b28a630b1a4ced071:
lockref: add ability to mark lockrefs "dead" (2013-09-07 15:49:18 -0700)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless.git tags/master-2013-09-09
for you to fetch changes up to f4e1a4d3ecbb9e42bdf8e7869ee8a4ebfa27fb20:
rt2800: change initialization sequence to fix system freeze (2013-09-09 14:44:34 -0400)
----------------------------------------------------------------
Alexey Khoroshilov (1):
rtl8187: fix use after free on failure path in rtl8187_init_urbs()
Arend van Spriel (1):
brcmfmac: fix bus interface selection in Kconfig
Hauke Mehrtens (1):
bcma: fix error code handling on 64 Bit systems
Solomon Peachy (2):
cw1200: Don't perform SPI transfers in interrupt context
cw1200: Prevent a lock-related hang in the cw1200_spi driver
Stanislaw Gruszka (1):
rt2800: change initialization sequence to fix system freeze
drivers/bcma/scan.c | 12 +++++++-----
drivers/net/wireless/brcm80211/Kconfig | 4 ++--
drivers/net/wireless/cw1200/cw1200_spi.c | 28 +++++++++++++++++++++++++---
drivers/net/wireless/cw1200/fwio.c | 2 +-
drivers/net/wireless/cw1200/hwbus.h | 1 +
drivers/net/wireless/cw1200/hwio.c | 15 +++++++++++++++
drivers/net/wireless/rt2x00/rt2800lib.c | 11 ++++++-----
drivers/net/wireless/rtl818x/rtl8187/dev.c | 15 ++++++++++-----
8 files changed, 67 insertions(+), 21 deletions(-)
diff --git a/drivers/bcma/scan.c b/drivers/bcma/scan.c
index cd6b20f..3776840 100644
--- a/drivers/bcma/scan.c
+++ b/drivers/bcma/scan.c
@@ -269,6 +269,8 @@ static struct bcma_device *bcma_find_core_reverse(struct bcma_bus *bus, u16 core
return NULL;
}
+#define IS_ERR_VALUE_U32(x) ((x) >= (u32)-MAX_ERRNO)
+
static int bcma_get_next_core(struct bcma_bus *bus, u32 __iomem **eromptr,
struct bcma_device_id *match, int core_num,
struct bcma_device *core)
@@ -351,11 +353,11 @@ static int bcma_get_next_core(struct bcma_bus *bus, u32 __iomem **eromptr,
* the main register space for the core
*/
tmp = bcma_erom_get_addr_desc(bus, eromptr, SCAN_ADDR_TYPE_SLAVE, 0);
- if (tmp == 0 || IS_ERR_VALUE(tmp)) {
+ if (tmp == 0 || IS_ERR_VALUE_U32(tmp)) {
/* Try again to see if it is a bridge */
tmp = bcma_erom_get_addr_desc(bus, eromptr,
SCAN_ADDR_TYPE_BRIDGE, 0);
- if (tmp == 0 || IS_ERR_VALUE(tmp)) {
+ if (tmp == 0 || IS_ERR_VALUE_U32(tmp)) {
return -EILSEQ;
} else {
bcma_info(bus, "Bridge found\n");
@@ -369,7 +371,7 @@ static int bcma_get_next_core(struct bcma_bus *bus, u32 __iomem **eromptr,
for (j = 0; ; j++) {
tmp = bcma_erom_get_addr_desc(bus, eromptr,
SCAN_ADDR_TYPE_SLAVE, i);
- if (IS_ERR_VALUE(tmp)) {
+ if (IS_ERR_VALUE_U32(tmp)) {
/* no more entries for port _i_ */
/* pr_debug("erom: slave port %d "
* "has %d descriptors\n", i, j); */
@@ -386,7 +388,7 @@ static int bcma_get_next_core(struct bcma_bus *bus, u32 __iomem **eromptr,
for (j = 0; ; j++) {
tmp = bcma_erom_get_addr_desc(bus, eromptr,
SCAN_ADDR_TYPE_MWRAP, i);
- if (IS_ERR_VALUE(tmp)) {
+ if (IS_ERR_VALUE_U32(tmp)) {
/* no more entries for port _i_ */
/* pr_debug("erom: master wrapper %d "
* "has %d descriptors\n", i, j); */
@@ -404,7 +406,7 @@ static int bcma_get_next_core(struct bcma_bus *bus, u32 __iomem **eromptr,
for (j = 0; ; j++) {
tmp = bcma_erom_get_addr_desc(bus, eromptr,
SCAN_ADDR_TYPE_SWRAP, i + hack);
- if (IS_ERR_VALUE(tmp)) {
+ if (IS_ERR_VALUE_U32(tmp)) {
/* no more entries for port _i_ */
/* pr_debug("erom: master wrapper %d "
* has %d descriptors\n", i, j); */
diff --git a/drivers/net/wireless/brcm80211/Kconfig b/drivers/net/wireless/brcm80211/Kconfig
index fc8a0fa..b00a7e9 100644
--- a/drivers/net/wireless/brcm80211/Kconfig
+++ b/drivers/net/wireless/brcm80211/Kconfig
@@ -28,7 +28,7 @@ config BRCMFMAC
config BRCMFMAC_SDIO
bool "SDIO bus interface support for FullMAC driver"
- depends on MMC
+ depends on (MMC = y || MMC = BRCMFMAC)
depends on BRCMFMAC
select FW_LOADER
default y
@@ -39,7 +39,7 @@ config BRCMFMAC_SDIO
config BRCMFMAC_USB
bool "USB bus interface support for FullMAC driver"
- depends on USB
+ depends on (USB = y || USB = BRCMFMAC)
depends on BRCMFMAC
select FW_LOADER
---help---
diff --git a/drivers/net/wireless/cw1200/cw1200_spi.c b/drivers/net/wireless/cw1200/cw1200_spi.c
index d063760..f5e6b48 100644
--- a/drivers/net/wireless/cw1200/cw1200_spi.c
+++ b/drivers/net/wireless/cw1200/cw1200_spi.c
@@ -40,7 +40,9 @@ struct hwbus_priv {
struct cw1200_common *core;
const struct cw1200_platform_data_spi *pdata;
spinlock_t lock; /* Serialize all bus operations */
+ wait_queue_head_t wq;
int claimed;
+ int irq_disabled;
};
#define SDIO_TO_SPI_ADDR(addr) ((addr & 0x1f)>>2)
@@ -197,8 +199,11 @@ static void cw1200_spi_lock(struct hwbus_priv *self)
{
unsigned long flags;
+ DECLARE_WAITQUEUE(wait, current);
+
might_sleep();
+ add_wait_queue(&self->wq, &wait);
spin_lock_irqsave(&self->lock, flags);
while (1) {
set_current_state(TASK_UNINTERRUPTIBLE);
@@ -211,6 +216,7 @@ static void cw1200_spi_lock(struct hwbus_priv *self)
set_current_state(TASK_RUNNING);
self->claimed = 1;
spin_unlock_irqrestore(&self->lock, flags);
+ remove_wait_queue(&self->wq, &wait);
return;
}
@@ -222,6 +228,8 @@ static void cw1200_spi_unlock(struct hwbus_priv *self)
spin_lock_irqsave(&self->lock, flags);
self->claimed = 0;
spin_unlock_irqrestore(&self->lock, flags);
+ wake_up(&self->wq);
+
return;
}
@@ -230,6 +238,8 @@ static irqreturn_t cw1200_spi_irq_handler(int irq, void *dev_id)
struct hwbus_priv *self = dev_id;
if (self->core) {
+ disable_irq_nosync(self->func->irq);
+ self->irq_disabled = 1;
cw1200_irq_handler(self->core);
return IRQ_HANDLED;
} else {
@@ -263,13 +273,22 @@ exit:
static int cw1200_spi_irq_unsubscribe(struct hwbus_priv *self)
{
- int ret = 0;
-
pr_debug("SW IRQ unsubscribe\n");
disable_irq_wake(self->func->irq);
free_irq(self->func->irq, self);
- return ret;
+ return 0;
+}
+
+static int cw1200_spi_irq_enable(struct hwbus_priv *self, int enable)
+{
+ /* Disables are handled by the interrupt handler */
+ if (enable && self->irq_disabled) {
+ enable_irq(self->func->irq);
+ self->irq_disabled = 0;
+ }
+
+ return 0;
}
static int cw1200_spi_off(const struct cw1200_platform_data_spi *pdata)
@@ -349,6 +368,7 @@ static struct hwbus_ops cw1200_spi_hwbus_ops = {
.unlock = cw1200_spi_unlock,
.align_size = cw1200_spi_align_size,
.power_mgmt = cw1200_spi_pm,
+ .irq_enable = cw1200_spi_irq_enable,
};
/* Probe Function to be called by SPI stack when device is discovered */
@@ -400,6 +420,8 @@ static int cw1200_spi_probe(struct spi_device *func)
spi_set_drvdata(func, self);
+ init_waitqueue_head(&self->wq);
+
status = cw1200_spi_irq_subscribe(self);
status = cw1200_core_probe(&cw1200_spi_hwbus_ops,
diff --git a/drivers/net/wireless/cw1200/fwio.c b/drivers/net/wireless/cw1200/fwio.c
index acdff0f..0b2061b 100644
--- a/drivers/net/wireless/cw1200/fwio.c
+++ b/drivers/net/wireless/cw1200/fwio.c
@@ -485,7 +485,7 @@ int cw1200_load_firmware(struct cw1200_common *priv)
/* Enable interrupt signalling */
priv->hwbus_ops->lock(priv->hwbus_priv);
- ret = __cw1200_irq_enable(priv, 1);
+ ret = __cw1200_irq_enable(priv, 2);
priv->hwbus_ops->unlock(priv->hwbus_priv);
if (ret < 0)
goto unsubscribe;
diff --git a/drivers/net/wireless/cw1200/hwbus.h b/drivers/net/wireless/cw1200/hwbus.h
index 8b2fc83..51dfb3a 100644
--- a/drivers/net/wireless/cw1200/hwbus.h
+++ b/drivers/net/wireless/cw1200/hwbus.h
@@ -28,6 +28,7 @@ struct hwbus_ops {
void (*unlock)(struct hwbus_priv *self);
size_t (*align_size)(struct hwbus_priv *self, size_t size);
int (*power_mgmt)(struct hwbus_priv *self, bool suspend);
+ int (*irq_enable)(struct hwbus_priv *self, int enable);
};
#endif /* CW1200_HWBUS_H */
diff --git a/drivers/net/wireless/cw1200/hwio.c b/drivers/net/wireless/cw1200/hwio.c
index ff230b7..41bd761 100644
--- a/drivers/net/wireless/cw1200/hwio.c
+++ b/drivers/net/wireless/cw1200/hwio.c
@@ -273,6 +273,21 @@ int __cw1200_irq_enable(struct cw1200_common *priv, int enable)
u16 val16;
int ret;
+ /* We need to do this hack because the SPI layer can sleep on I/O
+ and the general path involves I/O to the device in interrupt
+ context.
+
+ However, the initial enable call needs to go to the hardware.
+
+ We don't worry about shutdown because we do a full reset which
+ clears the interrupt enabled bits.
+ */
+ if (priv->hwbus_ops->irq_enable) {
+ ret = priv->hwbus_ops->irq_enable(priv->hwbus_priv, enable);
+ if (ret || enable < 2)
+ return ret;
+ }
+
if (HIF_8601_SILICON == priv->hw_type) {
ret = __cw1200_reg_read_32(priv, ST90TDS_CONFIG_REG_ID, &val32);
if (ret < 0) {
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index 95e6e61..88ce656 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -6659,19 +6659,20 @@ int rt2800_enable_radio(struct rt2x00_dev *rt2x00dev)
rt2800_init_registers(rt2x00dev)))
return -EIO;
+ if (unlikely(rt2800_wait_bbp_rf_ready(rt2x00dev)))
+ return -EIO;
+
/*
* Send signal to firmware during boot time.
*/
rt2800_register_write(rt2x00dev, H2M_BBP_AGENT, 0);
rt2800_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0);
- if (rt2x00_is_usb(rt2x00dev)) {
+ if (rt2x00_is_usb(rt2x00dev))
rt2800_register_write(rt2x00dev, H2M_INT_SRC, 0);
- rt2800_mcu_request(rt2x00dev, MCU_BOOT_SIGNAL, 0, 0, 0);
- }
+ rt2800_mcu_request(rt2x00dev, MCU_BOOT_SIGNAL, 0, 0, 0);
msleep(1);
- if (unlikely(rt2800_wait_bbp_rf_ready(rt2x00dev) ||
- rt2800_wait_bbp_ready(rt2x00dev)))
+ if (unlikely(rt2800_wait_bbp_ready(rt2x00dev)))
return -EIO;
rt2800_init_bbp(rt2x00dev);
diff --git a/drivers/net/wireless/rtl818x/rtl8187/dev.c b/drivers/net/wireless/rtl818x/rtl8187/dev.c
index 841fb9d..9a6edb0 100644
--- a/drivers/net/wireless/rtl818x/rtl8187/dev.c
+++ b/drivers/net/wireless/rtl818x/rtl8187/dev.c
@@ -438,17 +438,16 @@ static int rtl8187_init_urbs(struct ieee80211_hw *dev)
skb_queue_tail(&priv->rx_queue, skb);
usb_anchor_urb(entry, &priv->anchored);
ret = usb_submit_urb(entry, GFP_KERNEL);
+ usb_put_urb(entry);
if (ret) {
skb_unlink(skb, &priv->rx_queue);
usb_unanchor_urb(entry);
goto err;
}
- usb_free_urb(entry);
}
return ret;
err:
- usb_free_urb(entry);
kfree_skb(skb);
usb_kill_anchored_urbs(&priv->anchored);
return ret;
@@ -956,8 +955,12 @@ static int rtl8187_start(struct ieee80211_hw *dev)
(RETRY_COUNT << 8 /* short retry limit */) |
(RETRY_COUNT << 0 /* long retry limit */) |
(7 << 21 /* MAX TX DMA */));
- rtl8187_init_urbs(dev);
- rtl8187b_init_status_urb(dev);
+ ret = rtl8187_init_urbs(dev);
+ if (ret)
+ goto rtl8187_start_exit;
+ ret = rtl8187b_init_status_urb(dev);
+ if (ret)
+ usb_kill_anchored_urbs(&priv->anchored);
goto rtl8187_start_exit;
}
@@ -966,7 +969,9 @@ static int rtl8187_start(struct ieee80211_hw *dev)
rtl818x_iowrite32(priv, &priv->map->MAR[0], ~0);
rtl818x_iowrite32(priv, &priv->map->MAR[1], ~0);
- rtl8187_init_urbs(dev);
+ ret = rtl8187_init_urbs(dev);
+ if (ret)
+ goto rtl8187_start_exit;
reg = RTL818X_RX_CONF_ONLYERLPKT |
RTL818X_RX_CONF_RX_AUTORESETPHY |
--
John W. Linville Someday the world will need a hero, and you
[email protected] might be all we have. Be ready.
From: "John W. Linville" <[email protected]>
Date: Tue, 10 Sep 2013 15:38:45 -0400
> This is a pull request for a few early fixes for the 3.12 stream.
Looks good, pulled, thanks John.