Hi John,
here's a bigger pull request including patches applied during the merge
window. Major changes are:
* throughput improvements including aligning the RX frames correctly and
optimising HTT layer (Michal)
* remove qca98xx hw1.0 support (Bartosz)
* add support for firmware version 999.999.0.636 (Michal)
* firmware htt statistics support (Kalle)
* fix WEP in AP and IBSS mode (Marek)
* fix a mutex unlock balance in debugfs file (Shafi)
And of course there's a lot of smaller fixes and cleanup.
To avoid the pull request getting too big, I didn't include the latest
patches from ath.git. I'm planning to send them once you have pulled
this one. Please let me know if there are any problems.
Kalle
The following changes since commit 9d0e2f0772d394060bf3b17cd1f3a35574365103:
ath6kl: Fix invalid pointer access on fuzz testing with AP mode (2013-08-07 10:58:59 +0300)
are available in the git repository at:
git://github.com/kvalo/ath.git tags/for-linville-20131001
for you to fetch changes up to 6e712d427cb0542afdd5220edb6e4f4f8a5b952d:
ath10k: replenish HTT RX buffers in a tasklet (2013-09-26 17:22:54 +0300)
----------------------------------------------------------------
Bartosz Markowski (5):
ath10k: Remove qca98xx hw1.0 support
ath10k: update supported FW build version
ath10k: set the UART baud rate to 19200
ath10k: remove obsolete INIT STATUS definitions
ath10k: define ath10k_debug_start/_stop as static inline
Dave Jones (1):
ath10k: add missing braces to ath10k_pci_tx_pipe_cleanup
Janusz Dziedzic (2):
ath10k: setup peer UAPSD flag correctly
ath10k: check allocation errors in CE
Jingoo Han (1):
wireless: ath10k: remove unnecessary pci_set_drvdata()
Kalle Valo (22):
ath10k: remove un ar_pci->cacheline_sz field
ath10k: pci: make host_ce_config_wlan[] more readable
ath10k: make target_ce_config_wlan more readable
ath10k: remove void pointer from struct ath10k_pci_compl
ath10k: convert ath10k_pci_reg_read/write32() to take struct ath10k
ath10k: clean up ath10k_ce_completed_send_next_nolock()
ath10k: convert ath10k_pci_wake() to return
ath10k: simplify ath10k_ce_init() wake up handling
ath10k: check chip id from the soc register during probe
ath10k: add chip_id file to debugfs
ath10k: add trace event ath10k_htt_stats
ath10k: implement ath10k_debug_start/stop()
ath10k: add htt_stats_enable debugfs file
ath10k: add BMI log level
ath10k: rename ATH10K_DBG_CORE to BOOT
ath10k: cleanup debug messages in core.c
ath10k: add boot debug messages to pci.c and ce.c
ath10k: add boot debug messages to htc.c
ath10k: add boot messages to htt.c
ath10k: clean mac.c debug messages
ath10k: print phymode as a string
ath10k: delete struct ce_sendlist
Marek Puzyniak (1):
ath10k: fix WEP in AP and IBSS mode
Michal Kazior (36):
ath10k: clean up monitor start code
ath10k: use sizeof(*var) in kmalloc
ath10k: clean up PCI completion states
ath10k: print errcode when CE ring setup fails
ath10k: fix HTT service setup
ath10k: implement 802.3 SNAP rx decap type A-MSDU handling
ath10k: plug possible memory leak in WMI
ath10k: add support for firmware newer than 636
ath10k: add support for HTT 3.0
ath10k: use inline ce_state structure
ath10k: remove ce_op_state
ath10k: remove unused ce_attr parameters
ath10k: rename hif_ce_pipe_info to ath10k_pci_pipe
ath10k: rename ce_state to ath10k_ce_pipe
ath10k: rename ce_ring_state to ath10k_ce_ring
ath10k: prevent CE from looping indefinitely
ath10k: simplify HTC credits calculation
ath10k: add HTC TX credits replenishing notification
ath10k: make WMI commands block by design
ath10k: simplify HTC command submitting
ath10k: improve beacon submission latency
ath10k: remove wmi pending count limit
ath10k: remove wmi event worker thread
ath10k: fix tracing build for ath10k_wmi_cmd
ath10k: fix num_sends_allowed replenishing
ath10k: use num_pending_tx instead of msdu id bitmap
ath10k: avoid needless memset on TX path
ath10k: decouple HTT TX completions
ath10k: cleanup HTT TX functions
ath10k: use msdu headroom to store txfrag
ath10k: report A-MSDU subframes individually
ath10k: document decap modes
ath10k: cleanup RX decap handling
ath10k: fix Native Wifi decap mode RX
ath10k: align RX frames properly
ath10k: replenish HTT RX buffers in a tasklet
Mohammed Shafi Shajakhan (1):
ath10k: Fix mutex unlock balance
Sujith Manoharan (1):
ath10k: Calculate correct peer PHY mode for VHT
drivers/net/wireless/ath/ath10k/bmi.c | 42 ++-
drivers/net/wireless/ath/ath10k/ce.c | 382 +++++++++++-------------
drivers/net/wireless/ath/ath10k/ce.h | 120 ++------
drivers/net/wireless/ath/ath10k/core.c | 70 +++--
drivers/net/wireless/ath/ath10k/core.h | 35 ++-
drivers/net/wireless/ath/ath10k/debug.c | 144 +++++++++-
drivers/net/wireless/ath/ath10k/debug.h | 14 +-
drivers/net/wireless/ath/ath10k/htc.c | 241 ++++------------
drivers/net/wireless/ath/ath10k/htc.h | 5 +-
drivers/net/wireless/ath/ath10k/htt.c | 19 +-
drivers/net/wireless/ath/ath10k/htt.h | 13 +-
drivers/net/wireless/ath/ath10k/htt_rx.c | 314 +++++++++++---------
drivers/net/wireless/ath/ath10k/htt_tx.c | 285 +++++++++---------
drivers/net/wireless/ath/ath10k/hw.h | 25 +-
drivers/net/wireless/ath/ath10k/mac.c | 244 ++++++++--------
drivers/net/wireless/ath/ath10k/pci.c | 446 +++++++++++++++++------------
drivers/net/wireless/ath/ath10k/pci.h | 73 ++---
drivers/net/wireless/ath/ath10k/rx_desc.h | 24 +-
drivers/net/wireless/ath/ath10k/trace.h | 32 ++-
drivers/net/wireless/ath/ath10k/txrx.c | 67 ++---
drivers/net/wireless/ath/ath10k/txrx.h | 5 +-
drivers/net/wireless/ath/ath10k/wmi.c | 232 +++++++--------
drivers/net/wireless/ath/ath10k/wmi.h | 71 ++++-
23 files changed, 1534 insertions(+), 1369 deletions(-)
--
Kalle Valo
On Tue, Oct 01, 2013 at 08:48:36PM +0300, Kalle Valo wrote:
> Hi John,
>
> here's a bigger pull request including patches applied during the merge
> window. Major changes are:
>
> * throughput improvements including aligning the RX frames correctly and
> optimising HTT layer (Michal)
>
> * remove qca98xx hw1.0 support (Bartosz)
>
> * add support for firmware version 999.999.0.636 (Michal)
>
> * firmware htt statistics support (Kalle)
>
> * fix WEP in AP and IBSS mode (Marek)
>
> * fix a mutex unlock balance in debugfs file (Shafi)
>
> And of course there's a lot of smaller fixes and cleanup.
>
> To avoid the pull request getting too big, I didn't include the latest
> patches from ath.git. I'm planning to send them once you have pulled
> this one. Please let me know if there are any problems.
>
> Kalle
>
>
> The following changes since commit 9d0e2f0772d394060bf3b17cd1f3a35574365103:
>
> ath6kl: Fix invalid pointer access on fuzz testing with AP mode (2013-08-07 10:58:59 +0300)
>
> are available in the git repository at:
>
> git://github.com/kvalo/ath.git tags/for-linville-20131001
>
> for you to fetch changes up to 6e712d427cb0542afdd5220edb6e4f4f8a5b952d:
>
> ath10k: replenish HTT RX buffers in a tasklet (2013-09-26 17:22:54 +0300)
Pulling now...
--
John W. Linville Someday the world will need a hero, and you
[email protected] might be all we have. Be ready.