This patch adds few functions that initializes extra stuff that
is present only in rtl8187se HW, and it modify the existing
HW initialization function where necessary
Signed-off-by: Andrea Merello <[email protected]>
---
drivers/net/wireless/rtl818x/rtl8180/dev.c | 168 +++++++++++++++++++++++++++--
1 file changed, 159 insertions(+), 9 deletions(-)
diff --git a/drivers/net/wireless/rtl818x/rtl8180/dev.c b/drivers/net/wireless/rtl818x/rtl8180/dev.c
index 1c4a148..8061852 100644
--- a/drivers/net/wireless/rtl818x/rtl8180/dev.c
+++ b/drivers/net/wireless/rtl818x/rtl8180/dev.c
@@ -578,6 +578,75 @@ void rtl8180_set_anaparam(struct rtl8180_priv *priv, u32 anaparam)
rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
}
+static void rtl8187se_mac_config(struct ieee80211_hw *dev)
+{
+ struct rtl8180_priv *priv = dev->priv;
+ u8 reg;
+
+ rtl818x_iowrite32(priv, REG_ADDR4(0x1F0), 0);
+ rtl818x_ioread32(priv, REG_ADDR4(0x1F0));
+ rtl818x_iowrite32(priv, REG_ADDR4(0x1F4), 0);
+ rtl818x_ioread32(priv, REG_ADDR4(0x1F4));
+ rtl818x_iowrite8(priv, REG_ADDR1(0x1F8), 0);
+ rtl818x_ioread8(priv, REG_ADDR1(0x1F8));
+ /* Enable DA10 TX power saving */
+ reg = rtl818x_ioread8(priv, &priv->map->PHY_PR);
+ rtl818x_iowrite8(priv, &priv->map->PHY_PR, reg | 0x04);
+ /* Power */
+ rtl818x_iowrite16(priv, PI_DATA_REG, 0x1000);
+ rtl818x_iowrite16(priv, SI_DATA_REG, 0x1000);
+ /* AFE - default to power ON */
+ rtl818x_iowrite16(priv, REG_ADDR2(0x370), 0x0560);
+ rtl818x_iowrite16(priv, REG_ADDR2(0x372), 0x0560);
+ rtl818x_iowrite16(priv, REG_ADDR2(0x374), 0x0DA4);
+ rtl818x_iowrite16(priv, REG_ADDR2(0x376), 0x0DA4);
+ rtl818x_iowrite16(priv, REG_ADDR2(0x378), 0x0560);
+ rtl818x_iowrite16(priv, REG_ADDR2(0x37A), 0x0560);
+ rtl818x_iowrite16(priv, REG_ADDR2(0x37C), 0x00EC);
+ rtl818x_iowrite16(priv, REG_ADDR2(0x37E), 0x00EC);
+ rtl818x_iowrite8(priv, REG_ADDR1(0x24E), 0x01);
+ /* unknown, needed for suspend to RAM resume */
+ rtl818x_iowrite8(priv, REG_ADDR1(0x0A), 0x72);
+}
+
+static void rtl8187se_set_antenna_config(struct ieee80211_hw *dev, u8 def_ant,
+ bool diversity)
+{
+ struct rtl8180_priv *priv = dev->priv;
+
+ rtl8225_write_phy_cck(dev, 0x0C, 0x09);
+ if (diversity) {
+ if (def_ant == 1) {
+ rtl818x_iowrite8(priv, &priv->map->TX_ANTENNA, 0x00);
+ rtl8225_write_phy_cck(dev, 0x11, 0xBB);
+ rtl8225_write_phy_cck(dev, 0x01, 0xC7);
+ rtl8225_write_phy_ofdm(dev, 0x0D, 0x54);
+ rtl8225_write_phy_ofdm(dev, 0x18, 0xB2);
+ } else { /* main antenna */
+ rtl818x_iowrite8(priv, &priv->map->TX_ANTENNA, 0x03);
+ rtl8225_write_phy_cck(dev, 0x11, 0x9B);
+ rtl8225_write_phy_cck(dev, 0x01, 0xC7);
+ rtl8225_write_phy_ofdm(dev, 0x0D, 0x5C);
+ rtl8225_write_phy_ofdm(dev, 0x18, 0xB2);
+ }
+ } else { /* disable antenna diversity */
+ if (def_ant == 1) {
+ rtl818x_iowrite8(priv, &priv->map->TX_ANTENNA, 0x00);
+ rtl8225_write_phy_cck(dev, 0x11, 0xBB);
+ rtl8225_write_phy_cck(dev, 0x01, 0x47);
+ rtl8225_write_phy_ofdm(dev, 0x0D, 0x54);
+ rtl8225_write_phy_ofdm(dev, 0x18, 0x32);
+ } else { /* main antenna */
+ rtl818x_iowrite8(priv, &priv->map->TX_ANTENNA, 0x03);
+ rtl8225_write_phy_cck(dev, 0x11, 0x9B);
+ rtl8225_write_phy_cck(dev, 0x01, 0x47);
+ rtl8225_write_phy_ofdm(dev, 0x0D, 0x5C);
+ rtl8225_write_phy_ofdm(dev, 0x18, 0x32);
+ }
+ }
+ /* priv->curr_ant = def_ant; */
+}
+
static void rtl8180_int_enable(struct ieee80211_hw *dev)
{
struct rtl8180_priv *priv = dev->priv;
@@ -666,6 +735,7 @@ static int rtl8180_init_hw(struct ieee80211_hw *dev)
{
struct rtl8180_priv *priv = dev->priv;
u16 reg;
+ u32 reg32;
rtl818x_iowrite8(priv, &priv->map->CMD, 0);
rtl818x_ioread8(priv, &priv->map->CMD);
@@ -696,14 +766,36 @@ static int rtl8180_init_hw(struct ieee80211_hw *dev)
rtl8180_config_cardbus(dev);
}
- rtl818x_iowrite8(priv, &priv->map->MSR, 0);
+ if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE)
+ rtl818x_iowrite8(priv, &priv->map->MSR, RTL818X_MSR_ENEDCA);
+ else
+ rtl818x_iowrite8(priv, &priv->map->MSR, 0);
if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8180)
rtl8180_set_anaparam(priv, priv->anaparam);
rtl818x_iowrite32(priv, &priv->map->RDSAR, priv->rx_ring_dma);
- rtl818x_iowrite32(priv, &priv->map->TBDA, priv->tx_ring[1].dma);
- rtl818x_iowrite32(priv, &priv->map->TLPDA, priv->tx_ring[0].dma);
+ /* mac80211 queue have higher prio for lower index. The last queue
+ * (that mac80211 is not aware of) is reserved for beacons (and have
+ * the highest priority on the NIC)
+ */
+ if (priv->chip_family != RTL818X_CHIP_FAMILY_RTL8187SE) {
+ rtl818x_iowrite32(priv, &priv->map->TBDA,
+ priv->tx_ring[1].dma);
+ rtl818x_iowrite32(priv, &priv->map->TLPDA,
+ priv->tx_ring[0].dma);
+ } else {
+ rtl818x_iowrite32(priv, &priv->map->TBDA,
+ priv->tx_ring[4].dma);
+ rtl818x_iowrite32(priv, &priv->map->TVODA,
+ priv->tx_ring[0].dma);
+ rtl818x_iowrite32(priv, &priv->map->TVIDA,
+ priv->tx_ring[1].dma);
+ rtl818x_iowrite32(priv, &priv->map->TBEDA,
+ priv->tx_ring[2].dma);
+ rtl818x_iowrite32(priv, &priv->map->TBKDA,
+ priv->tx_ring[3].dma);
+ }
/* TODO: necessary? specs indicate not */
rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
@@ -724,7 +816,14 @@ static int rtl8180_init_hw(struct ieee80211_hw *dev)
if (priv->chip_family != RTL818X_CHIP_FAMILY_RTL8180) {
rtl818x_iowrite8(priv, &priv->map->WPA_CONF, 0);
rtl818x_iowrite8(priv, &priv->map->RATE_FALLBACK, 0x81);
+ } else {
+ rtl818x_iowrite8(priv, &priv->map->SECURITY, 0);
+
+ rtl818x_iowrite8(priv, &priv->map->PHY_DELAY, 0x6);
+ rtl818x_iowrite8(priv, &priv->map->CARRIER_SENSE_COUNTER, 0x4C);
+ }
+ if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8185) {
/* TODO: set ClkRun enable? necessary? */
reg = rtl818x_ioread8(priv, &priv->map->GP_ENABLE);
rtl818x_iowrite8(priv, &priv->map->GP_ENABLE, reg & ~(1 << 6));
@@ -732,11 +831,55 @@ static int rtl8180_init_hw(struct ieee80211_hw *dev)
reg = rtl818x_ioread8(priv, &priv->map->CONFIG3);
rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg | (1 << 2));
rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
- } else {
- rtl818x_iowrite8(priv, &priv->map->SECURITY, 0);
+ }
- rtl818x_iowrite8(priv, &priv->map->PHY_DELAY, 0x6);
- rtl818x_iowrite8(priv, &priv->map->CARRIER_SENSE_COUNTER, 0x4C);
+ if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE) {
+
+ /* the set auto rate fallback bitmask from 1M to 54 Mb/s */
+ rtl818x_iowrite16(priv, ARFR, 0xFFF);
+ rtl818x_ioread16(priv, ARFR);
+
+ /* stop unused queus (no dma alloc) */
+ rtl818x_iowrite8(priv, &priv->map->TPPOLL_STOP,
+ RTL818x_TPPOLL_STOP_MG | RTL818x_TPPOLL_STOP_HI);
+
+ rtl818x_iowrite8(priv, &priv->map->ACM_CONTROL, 0x00);
+ rtl818x_iowrite16(priv, &priv->map->TID_AC_MAP, 0xFA50);
+
+ rtl818x_iowrite16(priv, &priv->map->INT_MIG, 0);
+
+ /* some black magic here.. */
+ rtl8187se_mac_config(dev);
+
+ rtl818x_iowrite16(priv, RFSW_CTRL, 0x569A);
+ rtl818x_ioread16(priv, RFSW_CTRL);
+
+ rtl8180_set_anaparam(priv, RTL8225SE_ANAPARAM_ON);
+ rtl8180_set_anaparam2(priv, RTL8225SE_ANAPARAM2_ON);
+ rtl8180_set_anaparam3(priv, RTL8225SE_ANAPARAM3);
+
+
+ rtl818x_iowrite8(priv, &priv->map->CONFIG5,
+ rtl818x_ioread8(priv, &priv->map->CONFIG5) & 0x7F);
+
+ /*probably this switch led on */
+ rtl818x_iowrite8(priv, &priv->map->PGSELECT,
+ rtl818x_ioread8(priv, &priv->map->PGSELECT) | 0x08);
+
+ rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, 0x0480);
+ rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, 0x1BFF);
+ rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, 0x2488);
+
+ rtl818x_iowrite32(priv, &priv->map->RF_TIMING, 0x4003);
+
+ /* the reference code mac hardcode table write
+ * this reg by doing byte-wide accesses.
+ * It does it just for lowest and highest byte..
+ */
+ reg32 = rtl818x_ioread32(priv, &priv->map->RF_PARA);
+ reg32 &= 0x00ffff00;
+ reg32 |= 0xb8000054;
+ rtl818x_iowrite32(priv, &priv->map->RF_PARA, reg32);
}
priv->rf->init(dev);
@@ -752,6 +895,10 @@ static int rtl8180_init_hw(struct ieee80211_hw *dev)
else
rtl8180_conf_basic_rates(dev, 0x1f3);
+ if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE)
+ rtl8187se_set_antenna_config(dev,
+ priv->antenna_diversity_default,
+ priv->antenna_diversity_en);
return 0;
}
@@ -926,11 +1073,13 @@ static int rtl8180_start(struct ieee80211_hw *dev)
if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8185)
reg |= RTL818X_RX_CONF_CSDM1 | RTL818X_RX_CONF_CSDM2;
- else {
+ else if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8180) {
reg |= (priv->rfparam & RF_PARAM_CARRIERSENSE1)
? RTL818X_RX_CONF_CSDM1 : 0;
reg |= (priv->rfparam & RF_PARAM_CARRIERSENSE2)
? RTL818X_RX_CONF_CSDM2 : 0;
+ } else {
+ reg &= ~(RTL818X_RX_CONF_CSDM1 | RTL818X_RX_CONF_CSDM2);
}
priv->rx_conf = reg;
@@ -968,7 +1117,8 @@ static int rtl8180_start(struct ieee80211_hw *dev)
reg |= (6 << 21 /* MAX TX DMA */) |
RTL818X_TX_CONF_NO_ICV;
-
+ if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE)
+ reg |= 1<<30; /* "duration procedure mode" */
if (priv->chip_family != RTL818X_CHIP_FAMILY_RTL8180)
reg &= ~RTL818X_TX_CONF_PROBE_DTS;
--
1.8.3.2