This patchset introduces a new ieee80211_op offset_tsf(), which gives
the driver a s64 TSF offset for TSF adjustment. This is more accurate
than programming absolute TSF since programming delay is avoided.
ath10k can't get the current TSF or program an absolute TSF, so we
remove those ops to not mislead the stack and hopefully avoid future
bugs.
Tested on QCA4019 with firmware 10.4-3.2.1-0033. After this change
Toffset remains stable to within 5us.
Thomas Pedersen (4):
mac80211: add offset_tsf driver op
ath10k: implement offset_tsf ieee80211_op
ath10k: remove set/get_tsf ieee80211_ops
mac80211: mesh: decrease max drift
drivers/net/wireless/ath/ath10k/mac.c | 45 +++++++++++--------------------
drivers/net/wireless/ath/ath10k/wmi-tlv.c | 1 -
drivers/net/wireless/ath/ath10k/wmi.c | 6 ++---
drivers/net/wireless/ath/ath10k/wmi.h | 8 +++++-
include/net/mac80211.h | 8 ++++++
net/mac80211/debugfs_netdev.c | 12 ++++++---
net/mac80211/driver-ops.c | 15 +++++++++++
net/mac80211/driver-ops.h | 3 +++
net/mac80211/mesh_sync.c | 12 ++++++---
net/mac80211/trace.h | 26 ++++++++++++++++++
10 files changed, 94 insertions(+), 42 deletions(-)
--
2.10.0.297.gf6727b0
Neither of these did the right thing:
- get_tsf just returned 0
- set_tsf assumed a simple offset was applied against
get_tsf(), which works, except in the case of
calculating TSF from rx_mactime (actual TSF).
Just remove them for now. We can reimplement set_tsf in
terms of TSF increment/decrement in the future if get_tsf
is ever supported by FW.
Signed-off-by: Thomas Pedersen <[email protected]>
---
drivers/net/wireless/ath/ath10k/mac.c | 38 -------------------------------
drivers/net/wireless/ath/ath10k/wmi-tlv.c | 1 -
drivers/net/wireless/ath/ath10k/wmi.c | 4 ----
drivers/net/wireless/ath/ath10k/wmi.h | 1 -
4 files changed, 44 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 06bd027..9806546 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -6956,42 +6956,6 @@ static void ath10k_sta_rc_update(struct ieee80211_hw *hw,
ieee80211_queue_work(hw, &arsta->update_wk);
}
-static u64 ath10k_get_tsf(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
-{
- /*
- * FIXME: Return 0 for time being. Need to figure out whether FW
- * has the API to fetch 64-bit local TSF
- */
-
- return 0;
-}
-
-static void ath10k_set_tsf(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
- u64 tsf)
-{
- struct ath10k *ar = hw->priv;
- struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
- u32 tsf_offset, vdev_param = ar->wmi.vdev_param->set_tsf;
- int ret;
-
- /* Workaround:
- *
- * Given tsf argument is entire TSF value, but firmware accepts
- * only TSF offset to current TSF.
- *
- * get_tsf function is used to get offset value, however since
- * ath10k_get_tsf is not implemented properly, it will return 0 always.
- * Luckily all the caller functions to set_tsf, as of now, also rely on
- * get_tsf function to get entire tsf value such get_tsf() + tsf_delta,
- * final tsf offset value to firmware will be arithmetically correct.
- */
- tsf_offset = tsf - ath10k_get_tsf(hw, vif);
- ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id,
- vdev_param, tsf_offset);
- if (ret && ret != -EOPNOTSUPP)
- ath10k_warn(ar, "failed to set tsf offset: %d\n", ret);
-}
-
static void ath10k_offset_tsf(struct ieee80211_hw *hw,
struct ieee80211_vif *vif, s64 tsf_offset)
{
@@ -7477,8 +7441,6 @@ static const struct ieee80211_ops ath10k_ops = {
.get_survey = ath10k_get_survey,
.set_bitrate_mask = ath10k_mac_op_set_bitrate_mask,
.sta_rc_update = ath10k_sta_rc_update,
- .get_tsf = ath10k_get_tsf,
- .set_tsf = ath10k_set_tsf,
.offset_tsf = ath10k_offset_tsf,
.ampdu_action = ath10k_ampdu_action,
.get_et_sset_count = ath10k_debug_get_et_sset_count,
diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.c b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
index e64f593..5e399c6 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-tlv.c
+++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
@@ -3464,7 +3464,6 @@ static struct wmi_vdev_param_map wmi_tlv_vdev_param_map = {
.meru_vc = WMI_VDEV_PARAM_UNSUPPORTED,
.rx_decap_type = WMI_VDEV_PARAM_UNSUPPORTED,
.bw_nss_ratemask = WMI_VDEV_PARAM_UNSUPPORTED,
- .set_tsf = WMI_VDEV_PARAM_UNSUPPORTED,
};
static const struct wmi_ops wmi_tlv_ops = {
diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index 430074b..8661400 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -785,7 +785,6 @@ static struct wmi_vdev_param_map wmi_vdev_param_map = {
.meru_vc = WMI_VDEV_PARAM_UNSUPPORTED,
.rx_decap_type = WMI_VDEV_PARAM_UNSUPPORTED,
.bw_nss_ratemask = WMI_VDEV_PARAM_UNSUPPORTED,
- .set_tsf = WMI_VDEV_PARAM_UNSUPPORTED,
};
/* 10.X WMI VDEV param map */
@@ -861,7 +860,6 @@ static struct wmi_vdev_param_map wmi_10x_vdev_param_map = {
.meru_vc = WMI_VDEV_PARAM_UNSUPPORTED,
.rx_decap_type = WMI_VDEV_PARAM_UNSUPPORTED,
.bw_nss_ratemask = WMI_VDEV_PARAM_UNSUPPORTED,
- .set_tsf = WMI_VDEV_PARAM_UNSUPPORTED,
};
static struct wmi_vdev_param_map wmi_10_2_4_vdev_param_map = {
@@ -936,7 +934,6 @@ static struct wmi_vdev_param_map wmi_10_2_4_vdev_param_map = {
.meru_vc = WMI_VDEV_PARAM_UNSUPPORTED,
.rx_decap_type = WMI_VDEV_PARAM_UNSUPPORTED,
.bw_nss_ratemask = WMI_VDEV_PARAM_UNSUPPORTED,
- .set_tsf = WMI_10X_VDEV_PARAM_TSF_INCREMENT,
};
static struct wmi_vdev_param_map wmi_10_4_vdev_param_map = {
@@ -1012,7 +1009,6 @@ static struct wmi_vdev_param_map wmi_10_4_vdev_param_map = {
.meru_vc = WMI_10_4_VDEV_PARAM_MERU_VC,
.rx_decap_type = WMI_10_4_VDEV_PARAM_RX_DECAP_TYPE,
.bw_nss_ratemask = WMI_10_4_VDEV_PARAM_BW_NSS_RATEMASK,
- .set_tsf = WMI_10_4_VDEV_PARAM_TSF_INCREMENT,
.inc_tsf = WMI_10_4_VDEV_PARAM_TSF_INCREMENT,
.dec_tsf = WMI_10_4_VDEV_PARAM_TSF_DECREMENT,
};
diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h
index 9d13c6f..3a73b5c 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.h
+++ b/drivers/net/wireless/ath/ath10k/wmi.h
@@ -4676,7 +4676,6 @@ struct wmi_vdev_param_map {
u32 meru_vc;
u32 rx_decap_type;
u32 bw_nss_ratemask;
- u32 set_tsf;
u32 inc_tsf;
u32 dec_tsf;
};
--
2.10.0.297.gf6727b0
The old value was 30ms, which means mesh sync will treat
any value below as merely TSF drift. This isn't really
reasonable (typical drift is < 10us/s) since people
probably want to adjust TSF in smaller increments (for ie.
beacon collision avoidance) without mesh sync fighting
back.
Change max drift adjustment to 0.8ms, so manual TSF
adjustments can be made in 1ms increments, with some
margin.
Signed-off-by: Thomas Pedersen <[email protected]>
---
net/mac80211/mesh_sync.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/mac80211/mesh_sync.c b/net/mac80211/mesh_sync.c
index 22ca43c..faca22c 100644
--- a/net/mac80211/mesh_sync.c
+++ b/net/mac80211/mesh_sync.c
@@ -28,7 +28,7 @@
* could be, for instance, in case a neighbor is restarted and its TSF counter
* reset.
*/
-#define TOFFSET_MAXIMUM_ADJUSTMENT 30000 /* 30 ms */
+#define TOFFSET_MAXIMUM_ADJUSTMENT 800 /* 0.8 ms */
struct sync_method {
u8 method;
--
2.10.0.297.gf6727b0
Allows ie. mesh sync code to make incremental TSF
adjustments, avoiding any uncertainty introduced by delay
in programming absolute TSF.
Signed-off-by: Thomas Pedersen <[email protected]>
---
include/net/mac80211.h | 8 ++++++++
net/mac80211/debugfs_netdev.c | 12 +++++++++---
net/mac80211/driver-ops.c | 15 +++++++++++++++
net/mac80211/driver-ops.h | 3 +++
net/mac80211/mesh_sync.c | 10 +++++++---
net/mac80211/trace.h | 26 ++++++++++++++++++++++++++
6 files changed, 68 insertions(+), 6 deletions(-)
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 5296100..6312cbda9f 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -3166,6 +3166,12 @@ enum ieee80211_reconfig_type {
* required function.
* The callback can sleep.
*
+ * @offset_tsf: Offset the TSF timer by the specified value in the
+ * firmware/hardware. Preferred to set_tsf as it avoids delay between
+ * calling set_tsf() and hardware getting programmed, which will show up
+ * as TSF delay. Is not a required function.
+ * The callback can sleep.
+ *
* @reset_tsf: Reset the TSF timer and allow firmware/hardware to synchronize
* with other STAs in the IBSS. This is only used in IBSS mode. This
* function is optional if the firmware/hardware takes full care of
@@ -3531,6 +3537,8 @@ struct ieee80211_ops {
u64 (*get_tsf)(struct ieee80211_hw *hw, struct ieee80211_vif *vif);
void (*set_tsf)(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
u64 tsf);
+ void (*offset_tsf)(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
+ s64 offset);
void (*reset_tsf)(struct ieee80211_hw *hw, struct ieee80211_vif *vif);
int (*tx_last_beacon)(struct ieee80211_hw *hw);
int (*ampdu_action)(struct ieee80211_hw *hw,
diff --git a/net/mac80211/debugfs_netdev.c b/net/mac80211/debugfs_netdev.c
index 5d35c0f..bcec124 100644
--- a/net/mac80211/debugfs_netdev.c
+++ b/net/mac80211/debugfs_netdev.c
@@ -556,9 +556,15 @@ static ssize_t ieee80211_if_parse_tsf(
ret = kstrtoull(buf, 10, &tsf);
if (ret < 0)
return ret;
- if (tsf_is_delta)
- tsf = drv_get_tsf(local, sdata) + tsf_is_delta * tsf;
- if (local->ops->set_tsf) {
+ if (tsf_is_delta && local->ops->offset_tsf) {
+ drv_offset_tsf(local, sdata, tsf_is_delta * tsf);
+ wiphy_info(local->hw.wiphy,
+ "debugfs offset TSF by %018lld\n",
+ tsf_is_delta * tsf);
+ } else if (local->ops->set_tsf) {
+ if (tsf_is_delta)
+ tsf = drv_get_tsf(local, sdata) +
+ tsf_is_delta * tsf;
drv_set_tsf(local, sdata, tsf);
wiphy_info(local->hw.wiphy,
"debugfs set TSF to %#018llx\n", tsf);
diff --git a/net/mac80211/driver-ops.c b/net/mac80211/driver-ops.c
index c701b64..bb886e7 100644
--- a/net/mac80211/driver-ops.c
+++ b/net/mac80211/driver-ops.c
@@ -215,6 +215,21 @@ void drv_set_tsf(struct ieee80211_local *local,
trace_drv_return_void(local);
}
+void drv_offset_tsf(struct ieee80211_local *local,
+ struct ieee80211_sub_if_data *sdata,
+ s64 offset)
+{
+ might_sleep();
+
+ if (!check_sdata_in_driver(sdata))
+ return;
+
+ trace_drv_offset_tsf(local, sdata, offset);
+ if (local->ops->offset_tsf)
+ local->ops->offset_tsf(&local->hw, &sdata->vif, offset);
+ trace_drv_return_void(local);
+}
+
void drv_reset_tsf(struct ieee80211_local *local,
struct ieee80211_sub_if_data *sdata)
{
diff --git a/net/mac80211/driver-ops.h b/net/mac80211/driver-ops.h
index fe35a1c..f47781ab1 100644
--- a/net/mac80211/driver-ops.h
+++ b/net/mac80211/driver-ops.h
@@ -568,6 +568,9 @@ u64 drv_get_tsf(struct ieee80211_local *local,
void drv_set_tsf(struct ieee80211_local *local,
struct ieee80211_sub_if_data *sdata,
u64 tsf);
+void drv_offset_tsf(struct ieee80211_local *local,
+ struct ieee80211_sub_if_data *sdata,
+ s64 offset);
void drv_reset_tsf(struct ieee80211_local *local,
struct ieee80211_sub_if_data *sdata);
diff --git a/net/mac80211/mesh_sync.c b/net/mac80211/mesh_sync.c
index 64bc22a..22ca43c 100644
--- a/net/mac80211/mesh_sync.c
+++ b/net/mac80211/mesh_sync.c
@@ -70,9 +70,13 @@ void mesh_sync_adjust_tbtt(struct ieee80211_sub_if_data *sdata)
}
spin_unlock_bh(&ifmsh->sync_offset_lock);
- tsf = drv_get_tsf(local, sdata);
- if (tsf != -1ULL)
- drv_set_tsf(local, sdata, tsf + tsfdelta);
+ if (local->ops->offset_tsf) {
+ drv_offset_tsf(local, sdata, tsfdelta);
+ } else {
+ tsf = drv_get_tsf(local, sdata);
+ if (tsf != -1ULL)
+ drv_set_tsf(local, sdata, tsf + tsfdelta);
+ }
}
static void mesh_sync_offset_rx_bcn_presp(struct ieee80211_sub_if_data *sdata,
diff --git a/net/mac80211/trace.h b/net/mac80211/trace.h
index 77e4c53..10e9d4b 100644
--- a/net/mac80211/trace.h
+++ b/net/mac80211/trace.h
@@ -984,6 +984,32 @@ TRACE_EVENT(drv_set_tsf,
)
);
+TRACE_EVENT(drv_offset_tsf,
+ TP_PROTO(struct ieee80211_local *local,
+ struct ieee80211_sub_if_data *sdata,
+ s64 offset),
+
+ TP_ARGS(local, sdata, offset),
+
+ TP_STRUCT__entry(
+ LOCAL_ENTRY
+ VIF_ENTRY
+ __field(s64, tsf_offset)
+ ),
+
+ TP_fast_assign(
+ LOCAL_ASSIGN;
+ VIF_ASSIGN;
+ __entry->tsf_offset = offset;
+ ),
+
+ TP_printk(
+ LOCAL_PR_FMT VIF_PR_FMT " tsf offset:%lld",
+ LOCAL_PR_ARG, VIF_PR_ARG,
+ (unsigned long long)__entry->tsf_offset
+ )
+);
+
DEFINE_EVENT(local_sdata_evt, drv_reset_tsf,
TP_PROTO(struct ieee80211_local *local,
struct ieee80211_sub_if_data *sdata),
--
2.10.0.297.gf6727b0
On Wed, 2016-09-28 at 16:56 -0700, Thomas Pedersen wrote:
> This patchset introduces a new ieee80211_op offset_tsf(), which gives
> the driver a s64 TSF offset for TSF adjustment. This is more accurate
> than programming absolute TSF since programming delay is avoided.
>
You were lucky we have patchwork, otherwise I would've missed the
mac80211 patches in this series :)
Applied both now - no reason to apply them in the order you sent them.
johannes
Current set_tsf is implemented in terms of TSF_INCREMENT
only. Instead support new WMI command TSF_DECREMENT and
export these through offset_tsf. Advantage is we get
more accurate TSF adjustments, and don't calculate wrong
offset in case absolute TSF was calculated from rx_mactime
(actual TSF).
The new WMI command is available in firmware
10.4-3.2.1-00033 for QCA4019 chips. Old drivers on new
firmware or vice versa shouldn't be a problem since
get/set tsf logic was already broken.
Signed-off-by: Thomas Pedersen <[email protected]>
---
drivers/net/wireless/ath/ath10k/mac.c | 25 +++++++++++++++++++++++++
drivers/net/wireless/ath/ath10k/wmi.c | 2 ++
drivers/net/wireless/ath/ath10k/wmi.h | 7 +++++++
3 files changed, 34 insertions(+)
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 76297d6..06bd027 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -6992,6 +6992,30 @@ static void ath10k_set_tsf(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
ath10k_warn(ar, "failed to set tsf offset: %d\n", ret);
}
+static void ath10k_offset_tsf(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif, s64 tsf_offset)
+{
+ struct ath10k *ar = hw->priv;
+ struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
+ u32 offset, vdev_param;
+ int ret;
+
+ if (tsf_offset < 0) {
+ vdev_param = ar->wmi.vdev_param->dec_tsf;
+ offset = -tsf_offset;
+ } else {
+ vdev_param = ar->wmi.vdev_param->inc_tsf;
+ offset = tsf_offset;
+ }
+
+ ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id,
+ vdev_param, offset);
+
+ if (ret && ret != -EOPNOTSUPP)
+ ath10k_warn(ar, "failed to set tsf offset %d cmd %d: %d\n",
+ offset, vdev_param, ret);
+}
+
static int ath10k_ampdu_action(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
struct ieee80211_ampdu_params *params)
@@ -7455,6 +7479,7 @@ static const struct ieee80211_ops ath10k_ops = {
.sta_rc_update = ath10k_sta_rc_update,
.get_tsf = ath10k_get_tsf,
.set_tsf = ath10k_set_tsf,
+ .offset_tsf = ath10k_offset_tsf,
.ampdu_action = ath10k_ampdu_action,
.get_et_sset_count = ath10k_debug_get_et_sset_count,
.get_et_stats = ath10k_debug_get_et_stats,
diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index 38993d7..430074b 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -1013,6 +1013,8 @@ static struct wmi_vdev_param_map wmi_10_4_vdev_param_map = {
.rx_decap_type = WMI_10_4_VDEV_PARAM_RX_DECAP_TYPE,
.bw_nss_ratemask = WMI_10_4_VDEV_PARAM_BW_NSS_RATEMASK,
.set_tsf = WMI_10_4_VDEV_PARAM_TSF_INCREMENT,
+ .inc_tsf = WMI_10_4_VDEV_PARAM_TSF_INCREMENT,
+ .dec_tsf = WMI_10_4_VDEV_PARAM_TSF_DECREMENT,
};
static struct wmi_pdev_param_map wmi_pdev_param_map = {
diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h
index 1b243c8..9d13c6f 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.h
+++ b/drivers/net/wireless/ath/ath10k/wmi.h
@@ -4677,6 +4677,8 @@ struct wmi_vdev_param_map {
u32 rx_decap_type;
u32 bw_nss_ratemask;
u32 set_tsf;
+ u32 inc_tsf;
+ u32 dec_tsf;
};
#define WMI_VDEV_PARAM_UNSUPPORTED 0
@@ -5009,6 +5011,11 @@ enum wmi_10_4_vdev_param {
WMI_10_4_VDEV_PARAM_STA_KICKOUT,
WMI_10_4_VDEV_PARAM_CAPABILITIES,
WMI_10_4_VDEV_PARAM_TSF_INCREMENT,
+ WMI_10_4_VDEV_PARAM_RX_FILTER,
+ WMI_10_4_VDEV_PARAM_MGMT_TX_POWER,
+ WMI_10_4_VDEV_PARAM_ATF_SSID_SCHED_POLICY,
+ WMI_10_4_VDEV_PARAM_DISABLE_DYN_BW_RTS,
+ WMI_10_4_VDEV_PARAM_TSF_DECREMENT,
};
#define WMI_VDEV_PARAM_TXBF_SU_TX_BFEE BIT(0)
--
2.10.0.297.gf6727b0
"Pedersen, Thomas" <[email protected]> wrote:
> Current set_tsf is implemented in terms of TSF_INCREMENT
> only. Instead support new WMI command TSF_DECREMENT and
> export these through offset_tsf. Advantage is we get
> more accurate TSF adjustments, and don't calculate wrong
> offset in case absolute TSF was calculated from rx_mactime
> (actual TSF).
>
> The new WMI command is available in firmware
> 10.4-3.2.1-00033 for QCA4019 chips. Old drivers on new
> firmware or vice versa shouldn't be a problem since
> get/set tsf logic was already broken.
>
> Signed-off-by: Thomas Pedersen <[email protected]>
Depends on:
3a53731df7e2 mac80211: mesh: decrease max drift
354d381baf11 mac80211: add offset_tsf driver op and use it for mesh
2 patches set to Awaiting Upstream.
9355377 [2/4] ath10k: implement offset_tsf ieee80211_op
9355375 [3/4] ath10k: remove set/get_tsf ieee80211_ops
--
https://patchwork.kernel.org/patch/9355377/
Documentation about submitting wireless patches and checking status
from patchwork:
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
"Pedersen, Thomas" <[email protected]> wrote:
> Current set_tsf is implemented in terms of TSF_INCREMENT
> only. Instead support new WMI command TSF_DECREMENT and
> export these through offset_tsf. Advantage is we get
> more accurate TSF adjustments, and don't calculate wrong
> offset in case absolute TSF was calculated from rx_mactime
> (actual TSF).
>
> The new WMI command is available in firmware
> 10.4-3.2.1-00033 for QCA4019 chips. Old drivers on new
> firmware or vice versa shouldn't be a problem since
> get/set tsf logic was already broken.
>
> Signed-off-by: Thomas Pedersen <[email protected]>
2 patches applied to ath-next branch of ath.git, thanks.
973324fff154 ath10k: implement offset_tsf ieee80211_op
f6f64cfb966d ath10k: remove set/get_tsf ieee80211_ops
--
https://patchwork.kernel.org/patch/9355377/
Documentation about submitting wireless patches and checking status
from patchwork:
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches