by Maya Erez

[permalink] [raw]

Subject: [PATCH 09/12] wil6210: align to latest auto generated wmi.h

From: Lior David <[email protected]>

Align to latest version of the auto generated wmi file
describing the interface with FW.

Signed-off-by: Lior David <[email protected]>
Signed-off-by: Maya Erez <[email protected]>
---
drivers/net/wireless/ath/wil6210/wmi.h | 45 ++++++++++++++++++++++++++++++++--
1 file changed, 43 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/ath/wil6210/wmi.h b/drivers/net/wireless/ath/wil6210/wmi.h
index ad2782f..c5cf022 100644
--- a/drivers/net/wireless/ath/wil6210/wmi.h
+++ b/drivers/net/wireless/ath/wil6210/wmi.h
@@ -187,6 +187,7 @@ enum wmi_command_id {
WMI_RS_CFG_CMDID = 0x921,
WMI_GET_DETAILED_RS_RES_CMDID = 0x922,
WMI_AOA_MEAS_CMDID = 0x923,
+ WMI_BRP_SET_ANT_LIMIT_CMDID = 0x924,
WMI_SET_MGMT_RETRY_LIMIT_CMDID = 0x930,
WMI_GET_MGMT_RETRY_LIMIT_CMDID = 0x931,
WMI_NEW_STA_CMDID = 0x935,
@@ -547,7 +548,9 @@ struct wmi_pcp_start_cmd {
u8 pcp_max_assoc_sta;
u8 hidden_ssid;
u8 is_go;
- u8 reserved0[6];
+ u8 reserved0[5];
+ /* abft_len override if non-0 */
+ u8 abft_len;
u8 disable_ap_sme;
u8 network_type;
u8 channel;
@@ -1084,6 +1087,7 @@ enum wmi_event_id {
WMI_RS_CFG_DONE_EVENTID = 0x1921,
WMI_GET_DETAILED_RS_RES_EVENTID = 0x1922,
WMI_AOA_MEAS_EVENTID = 0x1923,
+ WMI_BRP_SET_ANT_LIMIT_EVENTID = 0x1924,
WMI_SET_MGMT_RETRY_LIMIT_EVENTID = 0x1930,
WMI_GET_MGMT_RETRY_LIMIT_EVENTID = 0x1931,
WMI_TOF_SESSION_END_EVENTID = 0x1991,
@@ -1304,7 +1308,8 @@ struct wmi_connect_event {
u8 assoc_req_len;
u8 assoc_resp_len;
u8 cid;
- u8 reserved2[3];
+ u8 aid;
+ u8 reserved2[2];
/* not in use */
u8 assoc_info[0];
} __packed;
@@ -1777,6 +1782,42 @@ struct wmi_get_detailed_rs_res_event {
u8 reserved[3];
} __packed;

+/* BRP antenna limit mode */
+enum wmi_brp_ant_limit_mode {
+ /* Disable BRP force antenna limit */
+ WMI_BRP_ANT_LIMIT_MODE_DISABLE = 0x00,
+ /* Define maximal antennas limit. Only effective antennas will be
+ * actually used
+ */
+ WMI_BRP_ANT_LIMIT_MODE_EFFECTIVE = 0x01,
+ /* Force a specific number of antennas */
+ WMI_BRP_ANT_LIMIT_MODE_FORCE = 0x02,
+ /* number of BRP antenna limit modes */
+ WMI_BRP_ANT_LIMIT_MODES_NUM = 0x03,
+};
+
+/* WMI_BRP_SET_ANT_LIMIT_CMDID */
+struct wmi_brp_set_ant_limit_cmd {
+ /* connection id */
+ u8 cid;
+ /* enum wmi_brp_ant_limit_mode */
+ u8 limit_mode;
+ /* antenna limit count, 1-27
+ * disable_mode - ignored
+ * effective_mode - upper limit to number of antennas to be used
+ * force_mode - exact number of antennas to be used
+ */
+ u8 ant_limit;
+ u8 reserved;
+} __packed;
+
+/* WMI_BRP_SET_ANT_LIMIT_EVENTID */
+struct wmi_brp_set_ant_limit_event {
+ /* wmi_fw_status */
+ u8 status;
+ u8 reserved[3];
+} __packed;
+
/* broadcast connection ID */
#define WMI_LINK_MAINTAIN_CFG_CID_BROADCAST (0xFFFFFFFF)

--
1.9.1

Subject: [PATCH 00/12] wil6210 patches

Subject: [PATCH 11/12] wil6210: option to override A-BFT length in start AP/PCP

Subject: [PATCH 04/12] wil6210: remove __func__ from debug printouts

Subject: [PATCH 10/12] wil6210: report association ID (AID) per station in debugfs

Subject: [PATCH 03/12] wil6210: support loading dedicated image for sparrow-plus devices

Subject: [PATCH 07/12] wil6210: protect against false interrupt during reset sequence

Subject: [PATCH 08/12] wil6210: fix for broadcast workaround in PBSS

Subject: [PATCH 12/12] wil6210: set dma mask to reflect device capability

Subject: [PATCH 05/12] wil6210: support new WMI-only FW capability

Subject: [PATCH 01/12] wil6210: add sysfs file for FTM calibration

Subject: [PATCH 02/12] wil6210: add disable_ap_sme module parameter

Subject: [PATCH 06/12] wil6210: missing reinit_completion in wmi_call

Subject: [PATCH 09/12] wil6210: align to latest auto generated wmi.h

Subject: [PATCH 04/12] wil6210: remove func from debug printouts