This patch fixes a crash that got introduced when the
mentioned patch replaced the direct list_head access
with skb_peek_tail(). When the device is starting up,
there are no entries in the queue, so previously to
"Use skb_peek_tail() instead..." the target_skb would
end up as the tail and head pointer which then could
be used by __skb_queue_after to fill the empty queue.
With skb_peek_tail() in its place will instead just
return NULL which then causes a crash in the
__skb_queue_after().
| BUG: unable to handle kernel NULL pointer dereference at 000000
| #PF error: [normal kernel read fault]
| PGD 0 P4D 0
| Oops: 0000 [#1] SMP PTI
| CPU: 0 PID: 12 Comm: kworker/0:1 Tainted: GO 5.1.0-rc7-wt+ #218
| Hardware name: MSI MS-7816/Z87-G43 (MS-7816), BIOS V1.11 05/09/2015
| Workqueue: events request_firmware_work_func
| RIP: 0010:p54_tx_pending+0x10f/0x1b0 [p54common]
| Code: 78 06 80 78 28 00 74 6d <48> 8b 07 49 89 7c 24 08 49 89 04 24 4
| RSP: 0018:ffffa81c81927d90 EFLAGS: 00010086
| RAX: ffff9bbaaf131048 RBX: 0000000000020670 RCX: 0000000000020264
| RDX: ffff9bbaa976d660 RSI: 0000000000000202 RDI: 0000000000000000
| RBP: ffff9bbaa976d620 R08: 00000000000006c0 R09: ffff9bbaa976d660
| R10: 0000000000000000 R11: ffffe8480dbc5900 R12: ffff9bbb45e87700
| R13: ffff9bbaa976d648 R14: ffff9bbaa976d674 R15: ffff9bbaaf131048
| FS: 0000000000000000(0000) GS:ffff9bbb5ec00000(0000) knlGS:00000
| CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
| CR2: 0000000000000000 CR3: 00000003695fc003 CR4: 00000000001606f0
| Call Trace:
| p54_download_eeprom+0xbe/0x120 [p54common]
| p54_read_eeprom+0x7f/0xc0 [p54common]
| p54u_load_firmware_cb+0xe0/0x160 [p54usb]
| request_firmware_work_func+0x42/0x80
| process_one_work+0x1f5/0x3f0
| worker_thread+0x28/0x3c0
Cc: [email protected]
Fixes: e3554197fc8f ("p54: Use skb_peek_tail() instead of direct head pointer accesses.")
Signed-off-by: Christian Lamparter <[email protected]>
---
drivers/net/wireless/intersil/p54/txrx.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/intersil/p54/txrx.c b/drivers/net/wireless/intersil/p54/txrx.c
index 790784568ad2..5bf1c19ecced 100644
--- a/drivers/net/wireless/intersil/p54/txrx.c
+++ b/drivers/net/wireless/intersil/p54/txrx.c
@@ -142,7 +142,10 @@ static int p54_assign_address(struct p54_common *priv, struct sk_buff *skb)
unlikely(GET_HW_QUEUE(skb) == P54_QUEUE_BEACON))
priv->beacon_req_id = data->req_id;
- __skb_queue_after(&priv->tx_queue, target_skb, skb);
+ if (target_skb)
+ __skb_queue_after(&priv->tx_queue, target_skb, skb);
+ else
+ __skb_queue_head(&priv->tx_queue, skb);
spin_unlock_irqrestore(&priv->tx_queue.lock, flags);
return 0;
}
--
2.20.1
Christian Lamparter <[email protected]> wrote:
> This patch fixes a crash that got introduced when the
> mentioned patch replaced the direct list_head access
> with skb_peek_tail(). When the device is starting up,
> there are no entries in the queue, so previously to
> "Use skb_peek_tail() instead..." the target_skb would
> end up as the tail and head pointer which then could
> be used by __skb_queue_after to fill the empty queue.
>
> With skb_peek_tail() in its place will instead just
> return NULL which then causes a crash in the
> __skb_queue_after().
>
> | BUG: unable to handle kernel NULL pointer dereference at 000000
> | #PF error: [normal kernel read fault]
> | PGD 0 P4D 0
> | Oops: 0000 [#1] SMP PTI
> | CPU: 0 PID: 12 Comm: kworker/0:1 Tainted: GO 5.1.0-rc7-wt+ #218
> | Hardware name: MSI MS-7816/Z87-G43 (MS-7816), BIOS V1.11 05/09/2015
> | Workqueue: events request_firmware_work_func
> | RIP: 0010:p54_tx_pending+0x10f/0x1b0 [p54common]
> | Code: 78 06 80 78 28 00 74 6d <48> 8b 07 49 89 7c 24 08 49 89 04 24 4
> | RSP: 0018:ffffa81c81927d90 EFLAGS: 00010086
> | RAX: ffff9bbaaf131048 RBX: 0000000000020670 RCX: 0000000000020264
> | RDX: ffff9bbaa976d660 RSI: 0000000000000202 RDI: 0000000000000000
> | RBP: ffff9bbaa976d620 R08: 00000000000006c0 R09: ffff9bbaa976d660
> | R10: 0000000000000000 R11: ffffe8480dbc5900 R12: ffff9bbb45e87700
> | R13: ffff9bbaa976d648 R14: ffff9bbaa976d674 R15: ffff9bbaaf131048
> | FS: 0000000000000000(0000) GS:ffff9bbb5ec00000(0000) knlGS:00000
> | CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> | CR2: 0000000000000000 CR3: 00000003695fc003 CR4: 00000000001606f0
> | Call Trace:
> | p54_download_eeprom+0xbe/0x120 [p54common]
> | p54_read_eeprom+0x7f/0xc0 [p54common]
> | p54u_load_firmware_cb+0xe0/0x160 [p54usb]
> | request_firmware_work_func+0x42/0x80
> | process_one_work+0x1f5/0x3f0
> | worker_thread+0x28/0x3c0
>
> Cc: [email protected]
> Fixes: e3554197fc8f ("p54: Use skb_peek_tail() instead of direct head pointer accesses.")
> Signed-off-by: Christian Lamparter <[email protected]>
Patch applied to wireless-drivers-next.git, thanks.
1645ab931998 p54: fix crash during initialization
--
https://patchwork.kernel.org/patch/10949055/
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches