From: Matthias Brugger <[email protected]>
Apart from a firmware binary the chip needs a config file used by the
FW. Add the config files to modinfo so that they can be read by
userspace.
Signed-off-by: Matthias Brugger <[email protected]>
---
Changes in v3:
Use only two more generic wildcards.
Changes in v2:
In comparison to first version [0] we use wildcards to enumerate the
firmware configuration files. Wildcard support was added to dracut
recently [1].
[0] https://lore.kernel.org/linux-wireless/[email protected]/
[1] https://github.com/dracutdevs/dracut/pull/860
drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
index 99987a789e7e..6fe91c537adf 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
@@ -625,6 +625,10 @@ BRCMF_FW_DEF(4359, "brcmfmac4359-sdio");
BRCMF_FW_DEF(4373, "brcmfmac4373-sdio");
BRCMF_FW_DEF(43012, "brcmfmac43012-sdio");
+/* firmware config files */
+MODULE_FIRMWARE(BRCMF_FW_DEFAULT_PATH "brcm/brcmfmac*-sdio.*.txt");
+MODULE_FIRMWARE(BRCMF_FW_DEFAULT_PATH "brcm/brcmfmac*-pcie.*.txt");
+
static const struct brcmf_firmware_mapping brcmf_sdio_fwnames[] = {
BRCMF_FW_ENTRY(BRCM_CC_43143_CHIP_ID, 0xFFFFFFFF, 43143),
BRCMF_FW_ENTRY(BRCM_CC_43241_CHIP_ID, 0x0000001F, 43241B0),
--
2.29.2
Hi,
On 11/24/20 1:00 PM, [email protected] wrote:
> From: Matthias Brugger <[email protected]>
>
> Apart from a firmware binary the chip needs a config file used by the
> FW. Add the config files to modinfo so that they can be read by
> userspace.
>
> Signed-off-by: Matthias Brugger <[email protected]>
>
> ---
>
> Changes in v3:
> Use only two more generic wildcards.
Thanks, patch looks good to me:
Reviewed-by: Hans de Goede <[email protected]>
Regards,
Hans
>
> Changes in v2:
> In comparison to first version [0] we use wildcards to enumerate the
> firmware configuration files. Wildcard support was added to dracut
> recently [1].
> [0] https://lore.kernel.org/linux-wireless/[email protected]/
> [1] https://github.com/dracutdevs/dracut/pull/860
>
> drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c | 4 ++++
> 1 file changed, 4 insertions(+)
>
> diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
> index 99987a789e7e..6fe91c537adf 100644
> --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
> +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
> @@ -625,6 +625,10 @@ BRCMF_FW_DEF(4359, "brcmfmac4359-sdio");
> BRCMF_FW_DEF(4373, "brcmfmac4373-sdio");
> BRCMF_FW_DEF(43012, "brcmfmac43012-sdio");
>
> +/* firmware config files */
> +MODULE_FIRMWARE(BRCMF_FW_DEFAULT_PATH "brcm/brcmfmac*-sdio.*.txt");
> +MODULE_FIRMWARE(BRCMF_FW_DEFAULT_PATH "brcm/brcmfmac*-pcie.*.txt");
> +
> static const struct brcmf_firmware_mapping brcmf_sdio_fwnames[] = {
> BRCMF_FW_ENTRY(BRCM_CC_43143_CHIP_ID, 0xFFFFFFFF, 43143),
> BRCMF_FW_ENTRY(BRCM_CC_43241_CHIP_ID, 0x0000001F, 43241B0),
>
[email protected] wrote:
> From: Matthias Brugger <[email protected]>
>
> Apart from a firmware binary the chip needs a config file used by the
> FW. Add the config files to modinfo so that they can be read by
> userspace.
>
> Signed-off-by: Matthias Brugger <[email protected]>
> Reviewed-by: Hans de Goede <[email protected]>
Patch applied to wireless-drivers-next.git, thanks.
75729e110e68 brcmfmac: expose firmware config files through modinfo
--
https://patchwork.kernel.org/project/linux-wireless/patch/[email protected]/
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches