Srinivasan Raju <[email protected]> writes:
> This introduces the pureLiFi LiFi driver for LiFi-X, LiFi-XC
> and LiFi-XL USB devices.
>
> This driver implementation has been based on the zd1211rw driver.
>
> Driver is based on 802.11 softMAC Architecture and uses
> native 802.11 for configuration and management.
>
> The driver is compiled and tested in ARM, x86 architectures and
> compiled in powerpc architecture.
>
> Signed-off-by: Srinivasan Raju <[email protected]>
I pushed this now to the pending branch of wireless-drivers-next for
build testing, let's see what kind of results we get. I didn't manage to
do a thorough review yet, but few quick comments:
> --- a/drivers/net/wireless/Kconfig
> +++ b/drivers/net/wireless/Kconfig
> @@ -35,6 +35,7 @@ source "drivers/net/wireless/st/Kconfig"
> source "drivers/net/wireless/ti/Kconfig"
> source "drivers/net/wireless/zydas/Kconfig"
> source "drivers/net/wireless/quantenna/Kconfig"
> +source "drivers/net/wireless/purelifi/Kconfig"
This is supposed to be in alphabetical order.
> --- a/drivers/net/wireless/Makefile
> +++ b/drivers/net/wireless/Makefile
> @@ -20,6 +20,7 @@ obj-$(CONFIG_WLAN_VENDOR_ST) += st/
> obj-$(CONFIG_WLAN_VENDOR_TI) += ti/
> obj-$(CONFIG_WLAN_VENDOR_ZYDAS) += zydas/
> obj-$(CONFIG_WLAN_VENDOR_QUANTENNA) += quantenna/
> +obj-$(CONFIG_WLAN_VENDOR_PURELIFI) += purelifi/
And this one as well. Clearly I missed these with quantenna, but no need
to redo the same mistake with purelife. Also patches welcome to fix
quantenna sorting.
> --- /dev/null
> +++ b/drivers/net/wireless/purelifi/plfxlc/Kconfig
> @@ -0,0 +1,13 @@
> +# SPDX-License-Identifier: GPL-2.0-only
> +config PLFXLC
> +
> + tristate "pureLiFi X, XL, XC device support"
> + depends on CFG80211 && MAC80211 && USB
> + help
> + This driver makes the adapter appear as a normal WLAN interface.
> +
> + The pureLiFi device requires external STA firmware to be loaded.
> +
The documentation here is not telling much. I think it goes without
saying that a firmware is needed, so no need to mention it. And also
"normal WLAN interface" is a standard upstream requirement so drop that
as well. Instead describe here in detail what hardware this driver
supports, for example exact product names, bus types, wifi/ieee
generation etc.
> + To compile this driver as a module, choose M here: the module will
> + be called purelifi.
Didn't you rename it to plfxlc?
--
https://patchwork.kernel.org/project/linux-wireless/list/
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches