2021-03-25 03:29:41

by Lorenzo Bianconi

[permalink] [raw]
Subject: [PATCH v3 1/2] dt-bindings:net:wireless:ieee80211: txt to yaml conversion

Convert generic ieee80211 dts bindings from .txt to .yaml

Signed-off-by: Lorenzo Bianconi <[email protected]>
---
.../bindings/net/wireless/ieee80211.txt | 24 ----------
.../bindings/net/wireless/ieee80211.yaml | 45 +++++++++++++++++++
2 files changed, 45 insertions(+), 24 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/net/wireless/ieee80211.txt
create mode 100644 Documentation/devicetree/bindings/net/wireless/ieee80211.yaml

diff --git a/Documentation/devicetree/bindings/net/wireless/ieee80211.txt b/Documentation/devicetree/bindings/net/wireless/ieee80211.txt
deleted file mode 100644
index f6442b1397f5..000000000000
--- a/Documentation/devicetree/bindings/net/wireless/ieee80211.txt
+++ /dev/null
@@ -1,24 +0,0 @@
-Common IEEE 802.11 properties
-
-This provides documentation of common properties that are valid for all wireless
-devices.
-
-Optional properties:
- - ieee80211-freq-limit : list of supported frequency ranges in KHz. This can be
- used for devices that in a given config support less channels than
- normally. It may happen chipset supports a wide wireless band but it is
- limited to some part of it due to used antennas or power amplifier.
- An example case for this can be tri-band wireless router with two
- identical chipsets used for two different 5 GHz subbands. Using them
- incorrectly could not work or decrease performance noticeably.
-
-Example:
-
[email protected],0 {
- reg = <0x0000 0 0 0 0>;
- [email protected],0 {
- reg = <0x0000 0 0 0 0>;
- ieee80211-freq-limit = <2402000 2482000>,
- <5170000 5250000>;
- };
-};
diff --git a/Documentation/devicetree/bindings/net/wireless/ieee80211.yaml b/Documentation/devicetree/bindings/net/wireless/ieee80211.yaml
new file mode 100644
index 000000000000..d58e1571df9b
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/wireless/ieee80211.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (c) 2018-2019 The Linux Foundation. All rights reserved.
+
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/wireless/ieee80211.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common IEEE 802.11 Binding
+
+maintainers:
+ - Lorenzo Bianconi <[email protected]>
+
+description: |
+ This provides documentation of common properties that are valid for
+ all wireless devices
+
+properties:
+ ieee80211-freq-limit:
+ $ref: /schemas/types.yaml#/definitions/uint32-matrix
+ items:
+ minItems: 2
+ maxItems: 2
+ description:
+ List of supported frequency ranges in KHz. This can be used for devices
+ that in a given config support less channels than normally. It may happen
+ chipset supports a wide wireless band but it is limited to some part of
+ it due to used antennas or power amplifier. An example case for this
+ can be tri-band wireless router with two identical chipsets used for two
+ different 5 GHz subbands. Using them incorrectly could not work or
+ decrease performance noticeably
+
+additionalProperties: true
+
+examples:
+ - |
+ pcie0 {
+ #address-cells = <3>;
+ #size-cells = <2>;
+ [email protected],0 {
+ reg = <0x0000 0 0 0 0>;
+ ieee80211-freq-limit = <2402000 2482000>,
+ <5170000 5250000>;
+ };
+ };
--
2.30.2


2021-03-27 15:28:28

by Rob Herring

[permalink] [raw]
Subject: Re: [PATCH v3 1/2] dt-bindings:net:wireless:ieee80211: txt to yaml conversion

On Wed, 24 Mar 2021 22:49:59 +0100, Lorenzo Bianconi wrote:
> Convert generic ieee80211 dts bindings from .txt to .yaml
>
> Signed-off-by: Lorenzo Bianconi <[email protected]>
> ---
> .../bindings/net/wireless/ieee80211.txt | 24 ----------
> .../bindings/net/wireless/ieee80211.yaml | 45 +++++++++++++++++++
> 2 files changed, 45 insertions(+), 24 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/net/wireless/ieee80211.txt
> create mode 100644 Documentation/devicetree/bindings/net/wireless/ieee80211.yaml
>

Reviewed-by: Rob Herring <[email protected]>