2021-06-08 15:10:24

by Maharaja Kennadyrajan

[permalink] [raw]
Subject: [PATCH v3 0/3] Add support to configure beacon tx mode

Add support to configure the beacon tx mode as STAGGERED
or BURST mode via hostapd configuration during the AP
bring-up or via wpa_suppplicant configuration during MESH

Beacons can be sent out in burst(continuously in a single shot
one after another) or staggered (equally spread out over beacon
interval) mode.

V3: Addressed Johnson's comment on v2 patch.

V2: Addressed Johannes's comment on v1 patch.

Maharaja Kennadyrajan (3):
nl80211: Add support for beacon tx mode
mac80211: Add support for beacon tx mode
ath11k: Add support for beacon tx mode

drivers/net/wireless/ath/ath11k/mac.c | 10 +++++++---
include/net/cfg80211.h | 4 ++++
include/net/mac80211.h | 2 ++
include/uapi/linux/nl80211.h | 16 ++++++++++++++++
net/mac80211/cfg.c | 2 ++
net/wireless/nl80211.c | 9 +++++++++
6 files changed, 40 insertions(+), 3 deletions(-)